STYLOOM 2.0 Hot Air Styler User Manual
- June 1, 2024
- STYLOOM
Table of Contents
STYLOOM 2.0 Hot Air Styler
Product Specifications
- Model: X
- Functions: Ionic function
- Overview:
1. Cool tip
2. Bristle
3. Ceramic barrel
4. Handle
5. 0-I-II-III Switch
6. Air inletProduct Usage Instructions
Before Use
Remove your hot air styler carefully from the box. Store the packaging for
future use.
Switching On
- Unwind the power cable and plug into the mains socket.
- Switch on and set the On/Off switch to the desired setting (1 or 2).
- Position 2 provides higher heat compared to position 1.
Switching Off
After use, set the On/Off switch to the off (0) position.
Operation – Styling Guide
Hair Drying Basics
- Shampoo, condition, and rinse hair thoroughly.
- Towel blot hair to remove excess moisture.
- Divide hair into sections.
- Use the hot air styler with a styling brush to direct hot air through each section of hair.
- Move the styler steadily across each section to ensure even drying.
- Avoid concentrating heat on one section for too long to prevent over-drying.
- Keep the air intake vents unobstructed and free from hair during operation.
- Avoid directing hot air towards the scalp.
Frequently Asked Questions (FAQ)
-
Q: Can I use the hot air styler in humid conditions?
A: No, it is not recommended to use the styler in humid or damp conditions to avoid potential hazards. -
Q: Is it safe for children to use the hot air styler?
A: No, children should not operate the hot air styler. It is important to keep children away from the appliance during use. -
Q: Can I replace the power cord myself if it gets damaged?
A: No, the mains lead of the appliance should only be replaced by the manufacturer, its service agent, or a qualified person to= prevent hazards.
STYLOOM 2.0 – USER MANUAL
Dear Customer! Thank you for buying this hot air styler.
You may already be familiar with using a hot air styer but do please take time
to read these instructions. They are designed to familiarize you with the
unit’s features and to ensure you get the very best out of your purchase.
Safety is important Your safety and the safety of others is important. Please,
therefore, ensure you read the safety instructions before you operate this hot
air styler
SAFETY INSTRUCTIONS
Read all the safety instructions before first use of your hot air styler
WARNING: THIS HOT AIR STYLER UNTIL THE POWER IS DISCONNECTED AT THE
MAINS. TO AVOID RISK OF ELECTRIC SHOCK:
- Do not use this appliance near bathtubs, showers, basins or other vessels containing water.
- WARNING: Do not use this appliance near water.
- The airborne noise emitted by the appliance 90 dB(A).
- When the hot air styler is used in a bathroom, unplug it after use since the proximity of water presents a hazard even when the hairdryer is switched off.
- For additional protection, the installation of a residual current device (RCD) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.
- This appliance is not intended for use by persons(including children)with reduced physical, sensory or mental capacities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their by person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
- Always unplug the hot air styler after use.
- Do not use or store the hot air styler where it can come into contact with water.
- If the appliance falls into water, UNPLUG IT IMMEDIATELY. Do not reach into the water until the power has been disconnected.
- This hot air styler should never be left unattended when plugged in.
- Do not pull or wrap power cord around the hot air styler .
- Close supervision is necessary when this appliance is used by, on , or near children.
- Do not use attachments not recommended by the manufacturer.
- Never operate the hot air styler if it has a damaged cord or plug or if it has been dropped into water. Return the appliance to a service centre for examination and repair.
- Keep the cord away form heated surfaces.
- Never block the air vents at the rear of the hairdryer, or place it on a soft surface where the air vents free of dust, hair, etc. Do not insert any objects into the air vents.
- Do not use outdoors, or where aerosol products are being used.
- Do not direct hot air toward eyes.
- Attachments may get hot in use. Use care when handling them.
- Do not put the hot air styler down while it is operating.
- Check that the voltage rating of this appliance matches that of your supply.
- If the appliance falls into water, UNPLUG IT IMMEDIATELY. Do not reach into the water until the power has been disconnected.
- Do not use the appliance If the power cord is damaged. It must be replaced by the manufacturer, the aftermarket service or by a sufficiently qualified person in order to prevent any risk of an accident.
IMPORTANT
The mains lead of this appliance is not replaceable by the user. If the supply
cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard
Safety considerations Position the power supply lead so that it is not likely
to be walked on or pinched by things placed on or against them. Do not use the
hot air styler in humid or damp conditions. Do not allow the appliance to get
wet i.e. dripping or splashing, as this may be dangerous.
Ventilation The slots and openings on the appliance are for ventilation. Do
not cover or block them as it could lead to overheating. NEVER let children
push anything into the holes or slots on the hot air styler .
The Model with ‘X is ionic function
TECHNICAL DATA
- Rated voltage: AC 220-240 V
- Rated frequency: 50-60 Hz
- Rated Power Input: 1200W
PRODUCT OVERVIEW
- Cool tip
- bristle
- ceramic barrel
- Handle
- 0-I-II-III Switch
- Air inlet
BEFORE USE
Remove your hairdryer carefully from the box. You may wish to store the
packaging for future use.
IN THE BOX
Inside your hot air styler package you should have:
- Hot air styer
- User guide
Read these instructions before use.
SWITCHING ON
Mains power Unwind the power cable and plug into the mains socket and switch
on. Set the On/Off switch to the required settings (1 or 2). Position 2 is
hotter than position 1.
SWITCHING OFF
When you have finished, set the On/Off switch to the off (0) position.
OPERATION – STYLING GUIDE
Hair drying basics
- Shampoo and condition your hair. Rinse the hair thoroughly. Towel blot hair to remove excess moisture. Divide your hair into sections. Using the dryer along with a styling brush, direct hot air through a section of hair at a time. Move dryer steadily across each section so that hot air passes through hair. Direct air flow at hair, not scalp.
- Keep dryers air intake vents unobstructed and free from hair while dryer.
- To avoid over-drying, do not concentrate heat on any one section for any length of time. Keep the dryer moving as you style.
- For quick styling, dampen hair with a mist of water before styling with the dryer.
- When using the dryer to create curls and waves, dry hair almost completely on the warmest setting, then finish styling using the lower setting. This will set the style in your hair.
- This dryer includes a concentrator attachment. Use the concentrator when you need to focus the drying power in a small area (such as a curl or a wave) or when you want to relax curly hair.
HELP AND ADVICE
Important! Before you do any of the following, make sure the hot air styler is
unplugged from the mains supply.
CLEANING
Do not use liquid or aerosol cleaners. Clean your appliance with a soft, damp (not wet) cloth.
IF THE HOT AIR STYLER DOES NOT WORK
- Make sure it is plugged into the main supply and switch on.
- Make sure the ON/OFF button is on.
- Check the fuse in the plug (see Electrical Information). If the hairdryer still does not work properly, refer to your authorized service agent.
INSTRUCTIONS FOR RECYCLING AND DISPOSAL:
This label means that the product cannot be disposed of as other household
waste throughout the EU. To prevent potential damage to the environment or
human health from uncontrolled waste disposal. Recycle responsibly to promote
the sustainable use of material resources. If you want to return a used
device, use the drop-off and collection system, or contact the retailer from
whom you bought the product. The retailer can accept the product for
environmentally safe recycling.
A declaration by the manufacturer that the product complies with the
requirements of the applicable EU Directives.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>