LIANGLOME 2301 Solar Fence Lights Outdoor Instruction Manual
- June 1, 2024
- LIANGLOME
Table of Contents
LIANGLOME 2301 Solar Fence Lights Outdoor
Specifications
- Product: Solar Light
- Origin: Made in China
- Power Source: Solar
- Mounting Options: Screws Fixation, Double-Sided Adhesive Fixation
- Color Modes: Multiple
- Charging Time: 6-8 hours in sunlight
Product Usage Instructions
Installation Methods
Method 1 – Screws Fixation
- Using the provided punch template, mark the distance betweentwo holes on the wall.
- Drill two holes on the marked spots.
- Insert the plastic anchor into the holes and leave at least 1/4 inch exposed.
- Hang the solar light on the screws and securely installit.
Method 2 – Double-Sided Adhesive Fixation
- Clean the mounting surface thoroughly.
- Attach the solar light using the provided 3M Double-Sided Tape.
Color Modes Selection
The solar light offers multiple color modes. Use the switch to select your preferred color mode.
Initial Setup
- Turn on the switch and choose your desired color mode before first use.
- Place the solar light in direct sunlight for 6-8 hours to ensure the battery is fully charged.
Additional Notes
Avoid placing the solar light in shaded areas or under trees to maximize charging efficiency.
FAQ
- Q: How do I change the color mode of the solar light?
- A: Simply use the switch on the solar light to cycle through the available color modes.
- Q: Can I use a different type of adhesive for mounting?
- A: It is recommended to use the provided 3M Double-Sided Tape for secure mounting. Using other adhesives may not provide the same level of adhesion.
Use & Care
Please carefully read all the instructions before assembly. Failure to do so that result in faulty assembly and potential injury
WHAT IN BOX
SOLAR LIGHT MODEL OVERVIEW
This solar light has multiple color modes to choose from, and you can choose
your favorite color mode through the switch.
INSTALLATION
INSTALLATION METHODS 1 – DOUBLE SIDED ADHESIVE FIXATION
- Clean the mounting surface.
- Fixed with double-sided adhesive tapes
INSTALLATION METHODS 2 – SCREWS FIXATION
- Using a punch template to locate the distance between two holes
- Punch two holes with drill bit on the wall.
- Insert the plastic anchor into the wall, Insert the screws and leave at least 1/4 in.
- Just hang the solar light on the screw and install it.
When using it for the first time, please turn on the switch and choose your preferred color. Charge it in sunlight for 6-8 hours to ensure that the battery has sufficient power.
- Please do not place the solar light in the shade or shade of trees
- Please place the solar light in a sunny area for charging.
Additional Remarks
- Please attention: The time of sun exposure to solar panels has close relationship with the local weather conditions, installation site and direction, which will directly influence the charging effect.
- Pls ensure the solar panel is in plenty of suns for more than 6 hrs per day
- We remind kindly to clean the panel when it becomes dirty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>