BACA SYSTEMS Robo SawJet M Series Mitering Robotic SawJet Instruction Manual

BACA SYSTEMS Robo SawJet M Series Mitering Robotic SawJet

Product Specifications

• System Dimension: 20′-7 x 18′-6
• Overall Footprint (incl. utilities & clearance): 28′-5 x 21′-2

Product Usage Instructions

Electrical Panel Clearance:

Ensure a clearance of 3 feet from the electrical panel (marked as D) for safe maintenance and access.

Required Space for Pump Maintenance:

Allocate a space of 3 feet in the front and sides for pump maintenance to ensure easy accessibility and serviceability.

Minimum Required Space for Installing Fence:

For installing the fence, ensure a minimum clearance space of 8 feet by 7 feet 2 inches (SQ. CL).

Foundation Cutout:

Make sure the foundation cutout dimensions are as per specifications for proper installation.

Camera Optional:

The camera installation is optional; however, follow the recommended guidelines if opting for this feature.

Flexible PC Placement:

The system allows flexible placement of the PC for user convenience within the specified dimensions.

Utility Requirements:

• Power:
  • 1 Circuit 480V 3Phase 80A (65 FLA) for the Robot
  • 1 Circuit 480V 3Phase 100A (63 FLA) for the Pump
• Air:
  • 5 CFM @ 85-100 PSI Range for the Robot
  • 3 CFM @ 60-100 PSI Range for the Garnet Hopper
• Water:
  • 1 Source Clean
  • 1 Port 4gpm for Waterjet
  • 1 Port 3-5gpm

Frequently Asked Questions

Q: Can I use a different power supply than specified?

A: It is recommended to use the specified power supply to ensure optimal performance and safety of the system.

Q: Is the camera mandatory for operation?

A: No, the camera installation is optional and can be included based on user preference.

RSJM Single Pocket Left Table & Utilities

System Dimension: 20′-7″ x 18′-612″

Overall Footprint (incl. utilities & clearance): 28′-5″ x 21′-2″

Utility Requirements

Power:
1 Circuit 480V 3Phase 80A (65 FLA) (Robot)
1 Circuit 480V 3Phase 100A (63 FLA) (Pump)

Air:
5 CFM @ 85-100 PSI Range (Robot)
3 CFM @ 60-100 PSI Range (Garnet Hopper)

Water:
1 Source Clean
1 Port 4gpm (Waterjet)
1 Port 3-5gpm <65°F (Pump Cooling Water) 1 Source Gray 5gpm (Saw Water)

RSJM Single Pocket Right Table & Utilities

System Dimension: 20′-7″ x 18′-6/12″

Overall Footprint (incl. utilities & clearance): 28′-5″ x 21′-2″

Utility Requirements

Power:
1 Circuit 480V 3Phase 80A (65 FLA) (Robot)
1 Circuit 480V 3Phase 100A (63 FLA) (Pump)

Air:
5 CFM @ 85-100 PSI Range (Robot)
3 CFM @ 60-100 PSI Range (Garnet Hopper)

Water:
1 Source Clean
1 Port 4gpm (Waterjet)
1 Port 3-5gpm <65°F (Pump Cooling Water) 1 Source Gray 5gpm (Saw Water)

RSJM Single End Load Left Utilities

System Dimension: 21′-9″ x 18′-6/12″

Overall Footprint (incl. utilities & clearance): 24′-4/14″ x 26′-5/12″

Utility Requirements

Power:
1 Circuit 480V 3Phase 80A (65 FLA) (Robot)
1 Circuit 480V 3Phase 100A (63 FLA) (Pump)

Air:
5 CFM @ 85-100 PSI Range (Robot)
3 CFM @ 60-100 PSI Range (Garnet Hopper)

Water:
1 Source Clean
1 Port 4gpm (Waterjet)
1 Port 3-5gpm <65°F (Pump Cooling Water) 1 Source Gray 5gpm (Saw Water)

RSJM Single End Load Right Utilities

System Dimension: 21′-9″ x 18′-6/1.2″

Overall Footprint (incl. utilities & clearance): 24′-414″ x 26′-512″

Utility Requirements

Power:
1 Circuit 480V 3Phase 80A (65 FLA) (Robot)
1 Circuit 480V 3Phase 100A (63 FLA) (Pump)

Air:
5 CFM @ 85-100 PSI Range (Robot)
3 CFM @ 60-100 PSI Range (Garnet Hopper)

Water:
1 Source Clean
1 Port 4gpm (Waterjet)
1 Port 3-5gpm <65°F (Pump Cooling Water) 1 Source Gray 5gpm (Saw Water)

RSJM Single Table Layout Elevation View

Required overhead clearance with cameras: 12′-2″
Required overhead clearance without cameras: 11′-7″

RSJM UTILITY REQUIREMENTS

Reference pages in the Robo SawJet M-Series Pre-Install Document

ROBOT

1. Airline [pg. 13]
2. Foundation [pg. 14] Saw Water/Grey Water [pg. 12] Place saw water connection minimum 36″ away from any power supply

H2O JET PUMP

3. Power [pg. 8] 1 Circuit 480V 3Phase 100A 60Hz

4. H2O Pump Clean Water [pg. 9] KUKA ELECTRICAL CABINET

5. Robot Power [pg. 8] 1 Circuit 480V 3Phase 80A 60Hz

6. Ethernet [pg. 3] (Internet Connection – Hard Wired)
   GARNET HOPPER

7. Airline [pg. 13]

FINAL PLACEMENT DETERMINED DURING INSTALLATION. DO NOT SCALE

PROPRIETARY AND CONFIDENTIAL.
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF BACA SYSTEMS.
ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF BACA SYSTEMS IS PROHIBITED.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>