Axiwo AXW-SFL001 Socket Fan Light Instructions
- June 1, 2024
- Axiwo
Table of Contents
Axiwo AXW-SFL001 Socket Fan Light
SPECIFICATION
| Product Name | Socket Fan Light |
|---|---|
| Product Model | AXW-SFL001 |
| Light Color Temperature | 3000K-6000K |
| Wind Speed | 1-6 Gears I Natural Wind Mode |
| Function | Memory Function I Time Function/ Sudden Stop Protection |
| LED Light Power | MAX 16W |
| Fan Power | MAX 10.SW |
| Voltage Input | 110-240V |
| Access Type | E26/E27 Lamp Holder |
| Material | Screw into any standard lamp socket |
| Installation Mode | Metat+ABS+PC |
PACKAGE LIST
ASSEMBLY
- NOTE : Fan blades are packaged separately from the main power unit. Assembly is required.
- Insert each blade into the tab until it clicks into place, as shown at right.
- The blades can only be inserted one way.
INSTALLATION
No tools required, turn the power OFF using the wall light switch for that socket before installing the unit.
EQUIPPED WITH SAFETY OFF FEATURE
If the blades come in contact with an object during operation, the fan will
stop.
To restart:
- Option A: Turn the power OFF using the wall light switch for that socket. Wait for 4-5 seconds, then switch it back on. The last used fan/light setting will resume.
- Option B: Just wait 35 seconds before using the remote control again.
PRODUCT SIZE
INSTALLATION STEPS
- Turn off the main power switch.
- Install the fan blades on the main body of the fan.
- Screw the fan into the E26/E27 lamp holder, rotate it clockwise and secure it.
- Turn on the power switch and use the remote control to control the lights and fans.
REMOTE CONTROL INSTRUCTIONS
NOTE:
- Timing Button: Press it to set the timer for 2 hours. Once you’ve pressed this button, avoid pressing any other buttons to keep the timer working.
- Remote control code matching: Press the “SETUP” button within 5 seconds after turning on the power, the LED light will flash to indicate the success of the code matching. Otherwise, turn off the lamp and repeat this step. Once successful, one remote control can control multiple fan lights.
- The fan light can be adjusted from 1 to 6 speeds, with 3 colour temperatures and stepless dimming.
- The remote control without battery (Need 2 AAA batteries).
PRECAUTIONS:
- Please keep the fan light out of the reach of children.
- Even if we have a sudden stop protection, to reduce the risk of injury, please do not put fingers or other things into the working fan blades.
- For daily cleaning, you can use a damp cloth to wipe the surface without using corrosive chemicals.
- For use in open fixtures only.
- Do not use it with a dimmer.
- Do not place objects near the device.
- Do not use it with emergency exits.
- The LEDs are not replaceable, for indoor use only.
- Use in open luminaire only.
- The socket fan light is high high-intensity LED bulb, do not stare directly into the LED light.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, under part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The
device can be used in porlable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>