HITACHI RPIL-(0.4-1.5)FSRE Ducted Indoor Units Installation Guide
- June 1, 2024
- Hitachi
Table of Contents
HITACHI RPIL-(0.4-1.5)FSRE Ducted Indoor Units
Product Information
Specifications
- Model: RPIL-(0.4-1.5)FSRE
- Series: Ducted Indoor Units R32/R410A
- Revision: PMML0527 rev.3 – 07/2021
Product Usage Instructions
Installation
- Ensure the unit is placed in a suitable location with proper ventilation.
- Connect the unit to the appropriate power source following the provided electrical connections diagram.
- Securely attach the ducts to the unit according to the installation manual.
- Perform a thorough check to ensure all connections are secure before powering on the unit.
Operation
- Power on the unit using the provided remote control or control panel.
- Set the desired temperature and fan speed for optimal comfort.
- Regularly clean or replace air filters as per the maintenance instructions to ensure efficient operation.
- If any issues arise, refer to the troubleshooting section of the user manual or contact customer support.
FAQ
Q: How often should I clean the air filters?
A: It is recommended to clean or replace the air filters every 1-2 months
depending on usage frequency and air quality.
Q: Can I install the unit myself?
A: Installation of the unit should be done by a professional installer to
ensure proper setup and compliance with regulations.
Q: What should I do with the unit at the end of its life?
A: The unit should not be mixed with general household waste. Contact local
authorities for proper disposal methods in compliance with environmental
regulations.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>