Bellababy BLA8015-02 Electric Breast Feeding Pumps Instruction Manual

Bellababy BLA8015-02 Electric Breast Feeding Pumps

Read Before Use

1. Any questions during use please contact with Bella Baby service team.
   • EU customers: service-EU@bellababy-med.com
   • NA customers: service-US@bellababy-med.com
2. There are metal springs inside the blue clips, do not microwave or they will melt. They can be boiled or steam­sterilized.
3. Do not wash or steam-sterilize the tubing, or the water/moisture inside the tubing will get into the machine and damage the circuit, motor, and battery. Make sure the cylinder and cylinder cover are dry enough when turning on the machine.
4. Do not connect with other brands’ parts that are not in a closed system(there is a membrane/cylinder to separate air and milk). If you are not sure please send an email with photos for our confirmation before use.
5. Before the first use, please fully recharge the machine. Do not keep using the item when the battery is very low. Frequently doing this will damage the battery life.
6. Accessories are on sale, please click the store name on the Amazon products page, then click Product to find them. If still confused please contact the seller.

How to Use

1. Before the first use, please wash every part except the tubing and machine, then sterilize them with a steam sterilizer(Boiling instead if you do not have a steam sterilizer).If yours is a UV sterilizer or a microwave oven, please do not put in the blue clips because mental spring inside.
2. For moms pumping many times a day, please wash and clean the parts, and air dry them after every use. Then sterilize them after the last use.
3. Before pumping, it’s better to massage your breasts and warm them with a hot towel for a while, that will help to suck milk smoothly and less pain.
4. Sit down relax, and cover the massage cushion on the breast without air leakage. Incline the upper body forward a little. It’s better to pump no more than 10 minutes per time. If no breast milk comes out in 5 minutes, please try another time to pump or consult a doctor.

Matters Need Attention

1. Please do not put the tubing and machine into the water to clean and sterilize with a steam sterilizer.
2. After every use, please clean the parts that touched the breast or breast milk. Then air-dry them to prevent bacteria growth.
3. When disassembling or assembling again, please follow the instructions to make sure every step is correct, no air leakage.

How to Recharge

The USB cable can connect with the phone adapter and then plug into the wall. Or connect with a power bank, or laptop to recharge as long as there is a USB slot

Components of BLA8015-02 Double Electric Breast Pump

1

| Name|
---|---|---
Dustcover| pp| -20- 120 °C| 2
2| Massage cushion| Liquid silicone| -20- 180°C| 2
3| Tee Joint| pp| -20- 120 °C| 2
4| Cover of suction cylinder| pp| -20- 120 °C| 2
5| Suction cylinder| Liquid silicone| -20- 180°C| 2
6| Valve| Liquid silicone| -20- 180°C| 4
7| Bottle| pp| -20- 120 °C| 2
8| Main Machine| ABS| -10- 80°C| 1
9| Base of bottle| pp| -20- 120 °C| 2
10| Tube joint| pp| -20- 120 °C| 1
11| Screw cap of bottle| pp| -20- 120 °C| 2
12| Nipple| Liquid silicone| -20- 180°C| 2
13| Bottle Cover| pp| -20- 120 °C| 2

Assembly Steps

• Insert the massage cushion into the shield tightly.
• Set the cylinder into the tee joint tightly, then press the cylinder cover closely, no air leakage.
• Set the valve on the round bulge in the tee joint tightly(Note: Please do it carefully as the valve is flimsy, if damaged, replace it)
• Screw bottle in the tee joint, and connect them with the machine by the tubing tightly.

Function Description of BLA8015-02 Double Electric Breast Pump

1. On/Off Button
2. Massage Mode
3. Continuous Suck Mode
4. Frequency Conversion Mode
5. Normal Suck Mode
6. Power Bank Hole
7. Time Display
8. Battery Status
9. Power Supply Mode
10. Level Display

Function Instruction

• Long press( ) for 3s to turn on the machine, and it starts working with default mode for massage and stimulation, after 2 mins, automatically switches to mode, and click again to shut off.
• Click , and the pump starts massaging and stimulating the breast. The suction is between 1-6 levels. adjustable by clicking
• Click , the pump will suck breast milk continuously to finish milk pumping as soon as possible. The suction is between 1-6 levels. adjust the suction by clicking
• Click , the pump will suck breast milk with frequency conversion. It stimulates the breast from different frequencies. The suction is between 1-9 levels. adjustable by clicking
• Click , the pump will suck the breast pump normally. The suction is between 1-9 levels, adjustable by clicking

Product Parameters

About 150 Minutes

Bellabab

NingBo Huiyoo Baby Products Co., LTD.

• Add: 523# Cizhang Road, Zhangqi Industrial Area, Cixi City. Zhejiang Province, P.R. China.
• Tel.: +86 574 63679665
• Fax: +86 574 63677885
• E-mail: service-US@bellababy-med.com
• service-EU@bellababy-med.com

FREQUENTLY ASKED QUESTIONS

What are the dimensions of the Bellababy BLA8015-02 Electric Breast Feeding Pump?

The Bellababy BLA8015-02 Electric Breast Feeding Pump measures 14.02 x 10.24 x 4.13 inches.

What is the model number of the Bellababy BLA8015-02 Electric Breast Feeding Pump?

The model number of the Bellababy BLA8015-02 Electric Breast Feeding Pump is BLA8015-02.

What type of batteries does the Bellababy BLA8015-02 Electric Breast Feeding Pump require?

The Bellababy BLA8015-02 Electric Breast Feeding Pump requires 1 Lithium Ion battery.

What are the additional product features of the Bellababy BLA8015-02 Electric Breast Feeding Pump?

The additional product features of the Bellababy BLA8015-02 Electric Breast Feeding Pump include 2200mAh battery capacity, lightweight design, and portability.

What is the power source of the Bellababy BLA8015-02 Electric Breast Feeding Pump?

The Bellababy BLA8015-02 Electric Breast Feeding Pump is powered by batteries, making it battery-powered.

What is the battery life of the Bellababy BLA8015-02 Electric Breast Feeding Pump?

The battery life of the Bellababy BLA8015-02 Electric Breast Feeding Pump is 3 hours.

How much does the Bellababy BLA8015-02 Electric Breast Feeding Pump weigh?

The Bellababy BLA8015-02 Electric Breast Feeding Pump weighs 0.035 ounces.

What is the price of the Bellababy BLA8015-02 Electric Breast Feeding Pump?

The price of the Bellababy BLA8015-02 Electric Breast Feeding Pump is $59.99.

What warranty coverage is provided for the Bellababy BLA8015-02 Electric Breast Feeding Pump?

The Bellababy BLA8015-02 Electric Breast Feeding Pump comes with a 1-year warranty.

Is the Bellababy BLA8015-02 Electric Breast Feeding Pump suitable for frequent travel?

Yes, the Bellababy BLA8015-02 Electric Breast Feeding Pump is lightweight and portable, making it suitable for frequent travel.

Can the Bellababy BLA8015-02 Electric Breast Feeding Pump be used while charging?

The Bellababy BLA8015-02 Electric Breast Feeding Pump is not designed to be used while charging. It operates on battery power only.

Why is my Bellababy BLA8015-02 Electric Breast Feeding Pump not turning on?

If your Bellababy BLA8015-02 Electric Breast Feeding Pump is not turning on, ensure that the battery is properly inserted and charged. Check for any visible damage to the pump or battery. If the issue persists, contact Bellababy customer support for assistance.

How can I troubleshoot a decrease in suction power with my Bellababy BLA8015-02 Electric Breast Feeding Pump?

A decrease in suction power may indicate a clogged valve or membrane. Disassemble the pump and check for any blockages. Clean the components thoroughly and reassemble the pump. If suction remains low, consider replacing the valve or membrane.

What should I do if my Bellababy BLA8015-02 Electric Breast Feeding Pump is making unusual noises during operation?

Unusual noises may suggest a problem with the motor or internal components. Check for any loose parts or debris inside the pump. If the noise persists, contact Bellababy customer support for further guidance.

How do I troubleshoot issues with milk leakage from my Bellababy BLA8015-02 Electric Breast Feeding Pump?

Milk leakage could be due to improper assembly or damaged parts. Ensure that all components are securely attached and that there are no cracks or tears in the pump's tubing or valves. Replace any damaged parts as needed.

DOWNLOAD THE PDF LINK:Bellababy BLA8015-02 Electric Breast Feeding Pumps Instruction Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>