VEROBOARD 133322 Outdoor LED Strips Instructions
- June 1, 2024
- VEROBOARD
Table of Contents
VEROBOARD 133322 Outdoor LED Strips
Product Specifications
-
Power Feed Length: Customizable up to 5
feet -
Strip Length: Customizable based on
requirements -
Joiners Length: Customizable based on
requirements -
Power: 12V
Product Usage Instructions:
Step 1: Specify Power Feed Length
Decide the length of the power feed required for your setup, up to a maximum of 5 feet.
Step 2: Specify Strip Length
Determine the length of each strip needed for your lights. The strip length can vary based on your specific requirements.
Step 3: Specify Joiners Length
Identify the length of joiners required to connect the strips. Customize this based on the layout of your lights.
Step 4: Document Measurements
Record the measurements for Power Feed, Strip, and Joiners in a document or drawing as per the provided sample. Ensure all dimensions are accurately captured.
Step 5: Upload Measurements
Save the document with your measurements and upload the PDF in the ‘Upload Drawing’ section of the custom configuration form.
Frequently Asked Questions
Q: Can I customize the power feed length beyond 5 feet?
A: No, the power feed length is limited to a maximum of 5 feet for this product.
Q: How do I determine the number of joiners needed?
A: The number of joiners required depends on the layout and design of your lights. You can refer to the provided sample guide for assistance in determining the joiner count.
Q: What is the recommended power supply for this product?
A: The product operates on a 12V power supply. Ensure to use a compatible power source to avoid any issues with functionality.
Custom Oreding Guide
The provided sample custom ordering guide will help you specify sizes for the desired lights with joiners. Please follow the steps outlined in the provided example, which include specifying the Power Feed Length, Strip Length, and Joiners Length. Kindly document or draw these measurements in the Note section below, save the document, and upload the PDF in the ‘Upload Drawing’ section at the end of the custom configuration form.
Sample Notes & Drawings
Notes & Drawings
