VEROBOARD VBD-TR5-W 5W LED Light Engine Instructions

VEROBOARD VBD-TR5-W 5W LED Light Engine

Product Information

The 5W LED Light Engine with Frosted Glass Cover is a VEROBOARD model (VBD- TR5-W) designed for use with light fixture trims. It has an input voltage of 12V DC and consumes 5W of power. The LED light engine is suitable for damp locations and is inherently protected with Type IC.

It is important to note that this product should only be used with a Class 2 power unit. The LED light engine conforms to UL 2108 and is certified to CSA C22.2 #250.2 standards.

Product Usage Instructions

1. Ensure that the LED light engine is installed by a certified electrician.
2. Step 1: The LED light engine requires a 12V DC Class 2 transformer. Choose a transformer that meets the minimum loading requirements for proper operation of the LED light engines. Make sure the power delivered to the LED light engine does not exceed 12V DC. Follow all local and national electrical codes for wiring from the transformer to the LED light engine or from light engine to light engine if daisy-chaining.
3. Step 2: Use a hole saw or an appropriate method to cut a circular opening in the mounting surface based on the size of the selected fixture trim (e.g., VB-1045).
4. Step 3: Insert the LED light engine into the fixture trim.
5. Step 4: Route Class 2 wiring from the secondary side of the transformer through the opening in the mounting surface. Use Class 2 (CL2) cable or equivalent code compliant wiring
6. Step 5: If daisy-chaining multiple LED light engines, route Class 2 12V DC wiring from light engine to light engine following the provided wiring diagram.

Note: Assemble the VBD-TR5-W model with Veroboard’s trims only.
The selected fixture trim, VB-1045, is sold separately.

5W LED Light ENGINE with Frosted Glass Cover

VEROBOARD
Model: VBD-TR5-W
Input: 12V DC 5W
For Light Fixture Trims

• Use only with Class 2 power unit
• Type IC inherently protected
• Suitable for damp locations

Attention: This product must be installed by a certified electrician.

WARNING

• Risk of fire or electric shock.

• To prevent wiring damage or abrasion, do not expose wiring to the edges of the sheet metal or any other sharp object.

• For your safety, read and understand the instructions completely before starting installation.
  Before wiring to power supply or secondary devices, turn off electricity at the fuse or circuit breaker box.

• Refer to NEC article 411.
  This Type IC LED light engine is designed for direct contact with insulation materials which are approved for this application. Light engine may also be used in non-insulated spaces.

ATTENTION

• Assemble the VBD-TR5-W model with Veroboard’s trims only.
• Vapor barrier must be suitable for 90º C.
• Replace with VBD-TR5-W

Installation Instructions

Step 1. The LED light engine is intended for use with any 12V DC Class 2 transformer.

Note: These LED light engines consume 5W per light. Refer to minimum loading requirements of transformer selected to ensure proper operation of LED light engines.
Make certain power delivered to LED light engine does not exceed 12V DC.

Follow all local & national electrical codes for wiring from the transformer to the LED light engine, or from light engine to light engine if daisy- chaining (Refer to wiring diagram).

Step 2. Cut the appropriate size circular opening in mounting surface using a hole saw or other method (Depends on selected fixture trim size).

Step 3. Insert the LED light engine into the fixture trim.

Step 4. Route Class 2 wiring from the secondary side of the transformer through the opening in the mounting surface. Class 2 (CL2) cable or equivalent code-compliant wiring is required.

Step 5. LED light engine may also be daisy-chained by routing Class 2 12V DC wiring from light engine to light engine (Refer to wiring diagram).

Conforms to UL 2108
Certified to CSA C22.2 #250.2

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>