Liggue B0BJV4YT1J 59 Inch White Photo Ledge Shelf Instructions
- June 1, 2024
- Liggue
Table of Contents
Liggue B0BJV4YT1J 59 Inch White Photo Ledge Shelf
Specifications
| Component | Quantity |
|---|---|
| Long Metal Rails | 2 |
| Connector A (Ax) | 1 |
| Screws B (Bx) | 8 |
| Wall Anchors C (Cx) | 8 |
| Small Plates D (Dx) | 8 |
Step-by-Step Instructions
- Attach the two long metal rails (marked as ‘1’) onto the wall using Connector A (Ax1).
- Description: The image shows the rails being aligned horizontally against the wall with several holes for screws. Connector A should be placed at one end of the rails before they are secured to the wall.
- Secure the rails to the wall using Wall Anchors C (Cx8) and Screws B (Bx8).
- Description: An illustration depicts the use of a screwdriver to fasten Screws B into the Wall Anchors C which are already inserted into the wall.
- Once the rails are secured, ensure they are firmly attached and parallel to each other.
- Description: The final image shows the two rails mounted on the wall, parallel and level.
FAQ
- What tools are needed for assembly?
- A screwdriver is required to secure Screws B into the Wall Anchors C.
- How do I ensure the rails are level?
- Use a level tool before fully tightening the screws to ensure the rails are parallel and level.
- Can I install this without help?
- It’s possible to install the rails independently, but an extra set of hands may be helpful to hold the rails in place while securing them.
- What should I do if the rails are not level?
- Loosen the screws slightly, adjust the rails until they are level, and then retighten the screws.
Hardware
Installation Instruction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>