VIRTUAL MUEBLES RLC 4099 Ascher TV Table Instruction Manual
- June 1, 2024
- VIRTUAL MUEBLES
Table of Contents
VIRTUAL MUEBLES RLC 4099 Ascher TV Table
Product Specifications
- Brand: RTA
- Model: Extensible Beijing TV Rack
- Dimensions: 61.5 x 13.23 x 50.16 inches
- Weight Capacity: 66 lbs
Product Usage Instructions
Key Recommendations
- Do not paint the furniture.
- Do not wash handles or dumps with soap or abrasives.
- Do not hit or hammer the furniture (just do it where is indicated).
- Do not expose to rain or direct sun.
- Do not overload the cabinet. Weight max. 66lbs for kitchen cabinets.
- Do not allow children to handle the cabinets or drawers, they could get hurt.
- Do not drag the furniture. Lift it between two people.
Assembly Instructions
- Open the box and look for the hardware bag.
- Open the package and verify that the content of the pieces is correct.
- Separate hardware for easy identification during assembly.
- RTA furniture must be assembled in a clean place and on a flat surface.
Assembly Recommendations
-
It is recommended to assemble the product on the box or on a
flat surface to not scratch it. -
Carefully turn over the cabinet to assemble the back panels.
Assembly Hardware
- Sheet Metal Screw x48
- Wooden pin x24
- Minifix Cams x24
- Spreading Bolt x24
- Cover caps x10
- Plastic Glide x10
FAQ (Frequently Asked Questions)
-
Q: Can I paint the furniture?
A: No, painting the furniture is not recommended. -
Q: What is the weight capacity of the cabinet?
A: The weight capacity is a maximum of 66 lbs for kitchen cabinets. -
Q: Can children handle the cabinets?
A: It is not recommended to allow children to handle the cabinets or drawers as they could get hurt.
Height: 56,3 cm / 22.16 in
Width: 120 / 160 cm / 47.24 / 62.99 in
Depth: 35,5 cm / 13.97 in
ASSEMBLY INSTRUCTIONS
When you finish off adhesive build (in case of residues of glue, wipe it with
alcohol)
When you finish the adjustment of the connectors, proceed to put the cover
tapes
KEY RECOMMENDATIONS
BASIC HARDWARE FOR RTA FURNITURE
- Open the box and look for the hardware bag.
- Open the package and verify that the content of the pieces is correct.
- Separate hardware for easy identification during assembly
- RTA furniture must be assembled in a clean place and on a flat surface.
ASSEMBLY RECOMMENDATIONS
MINIFIX / CONNECTOR – DOWELS
- Insert the minifix cam in the hole placed in the face of the panel with the arrow ponting towards the hole where the bolt will fit.
- Insert the bolt with its plastic base in the shown holes, then insert the metallic bolt head in the holes so it fits inside the minifix cam.
- Tight the panels by turning the minifix cam 180°.
FLUTED DOWE
It´s a short and thick piece of wood, 1,9 to 3,9 inches approximately, which is used to tie the cabinet and give it resistence.
- It is recommended to assemble the product on the box or on a flat surface to not scratch it.
- Carefully turn over the cabinet to assemble the back panels.
MAX SUGGESTED LOAD (Kg)
NOTE: The load capacity depends if it is a point load or if it is an uniform distributed load, do not exceed the suggested loads.
ASSEMBLY HARDWARE
PLEASE BE CAUTIOUS WHEN OPENING THE HARDWARE BAG TO NOT LOSE ANY. CHECK THE CONTENTS OF THE PARTS ARE CORRECT. IF ANY PART IS MISSING OR IMPERFECT PLEASE RETURN THE PARTS TO THE STORE WITH THE PRODUCT INVOICE ATTACHED TO MAKE EFECTIVE THE REPLACEMENT OF THE IMPERFECT PIECES OR HARDWARE AS SOON AS POSSIBLE.
ASSEMBLY PARTS
BEFORE STARTING TO ASSEMBLE THE CABINET, CAREFULLY READ THE INSTRUCTIONS. IT IS RECOMMENDED TO ASSEMBLE THE FURNITURE ON THE BOX OR ON A FLAT AND COVERED SURFACE IN ORDER TO NOT SCRATCH THE PRODUCT.
TEL (572) 691 17 00 PBX (572) 695 91 81 CALI – COLOMBIA
www.rta.com.co
Extensible Beijing TV Rack