euro-lite PB.0-S-EVO Mini Smart Stick Bluetooth LED Controller Instruction Manual
- June 1, 2024
- euro-lite
Table of Contents
euro-lite PB.0-S-EVO Mini Smart Stick Bluetooth LED Controller
Specifications
- Product Name: Casambi Mini Smart Stick
- Type: Bluetooth LED Controller
- Part Number: PB.0-S-EVO
- Input Voltage: DC6-24V
- Output: Constant Voltage, 4x3A
- Wireless Protocol: Casambi App
- Waterproof Rating: IP68
Power Supply Input
Connect the power supply input to a DC6-24V source. Ensure the output is
constant voltage and does not exceed the controller’s rating of 4x3A.
LED Output
Connect the LED output to your lighting products based on the color
configuration provided in the manual. Make sure to match the LED rated voltage
with the power supply voltage.
Status Indicator Light
The indicator light provides information about the controller’s status.
Refer to the color reference table in the manual for details on different
status indications.
System Setup
Before installation or servicing, ensure to turn off power at the source.
Follow the provided guidelines for a safe setup.
Operation
This device is controlled via a smart device using the Casambi App. Make
sure your device meets the minimum operating system requirements for
compatibility.|
Advanced Functions
Change Light Type
You can change the working mode from single color to RGBW by accessing the
Change Profile function on the Casambi App. Ensure the controller is not
paired before making changes.
INSTRUCTION MANUAL
Specifications subject to change without notice. Visit us online for the most current information.
CASAMBI MINI SMART STICK
BLUETOOTH LED CONTROLLER
POWER & CONTROLS // SMART LED CONTROLLER
PART #: PB.0-S-EVO
PACKAGE CONTENTS
| PART | DESCRIPTION | QTY |
|---|---|---|
| Evo-Lite Mini Smart Stick Led Controller | Multi-channel controller for |
Apple / Android. Use with single color, tunable white, RGB, RGBW, and 4-channel dimming applications.| **** 1
Please reference the specification sheet for all technical data.
SAFETY & COMPLIANCE INFORMATION
Read all instructions before beginning.
- WARNING: RISK OF ELECTRIC SHOCK. Disconnect power at the source before adjusting or modifying the product or lighting system.
- To reduce the risk of fire, electric shock, or injury to persons, pay close attention to this manual and stay within its guidelines when using this product. Do not connect this product to AC current. Only use with 6-24VDC input power.
- Product should be installed in accordance with all local/regional electrical codes and the current National Electric Code.
- Product must be installed per these instructions and contained within and exclusive to application where not subject to damage.
INTRODUCTION
This LED controller is designed for use with 6-24VDC low voltage lighting products. The Casambi app makes it easy to control single color, tunable white, RGB, and RGBW lighting products. The control’s compact size makes it easy to work with in limited spaces. The standard lead wire design makes connecting power and lighting products simple.
POWER SUPPLY INPUT
Connect to power supply. The controller can accept supply voltage from 6VDC–24VDC. Connect the red wire to power positive and the black wire to negative. The output voltage will match the supplied input voltage. Make sure that the power supply voltage and supplied wattage are appropriate for the connected load.
LED OUTPUT
Connect to constant voltage LED loads. Ensure the LED rated voltage is the same as the power supply and each channel’s maximum load current is below the controller’s rated current. The controller can be configured for single color, tunable white, RGB, or RGBW. Please refer to the table to the right. The black wire is positive (+) on the output side.
Color| White
(channel 1)
| Green
(channel 2)
| Red
(channel 3)
| Blue
(channel 4)
---|---|---|---|---
Single Color| White| White| White| White
Tunable White| Cool White| Cool White| Warm White| Warm White
RGB| Unused| Green| Red| Blue
RGBW| White| Green| Red| Blue
STATUS INDICATOR LIGHT
The indicator light shows the status of the controller. See color reference table below.
Steady Blue| White Blink| White Blink 3X| Yellow Flash X1|
Red Flash| Yellow Flash
---|---|---|---|---|---
Normal Working| Command received| Confirmation / identification| Edge of the
adjustment| Overload protection| Overheat protection
SYSTEM SETUP
Turn power off at the source before installing or servicing the lighting
components or system.
OPERATION
This device is controlled by a smart device such as a tablet or smart phone.
It requires iOS 10.0, Android 4.4, or Mac OS 11.0 or later operating system to
support the app. All functions of the controller are integrated with the
Casambi App. Download the app on the App Store or Google Play Store.
IP68 WATERPROOF VERSION
The –S version controller is IP68 waterproof rated with glue injection
finish. For overall waterproof performance, the cables must be waterproof
treated separately. The wireless communication signal could degrade in wet
environments and the control distance may be shortened in such case.
ADVANCED FUNCTIONS
- Change Light Type: The working mode can be changed from 1 channel single color to 4 channel RGBW via the Casambi App. To change the model, make sure the controller is not paired and then select the “Change Profile” function on the app.
- Change User Parameters: The gradient time and PWM frequency is adjustable from the user parameter setting. Access the Casambi App settings to set up these parameters.
- Protection feature: The controller has full protection against incorrect wiring, load short circuit, overload, and overheat. The controller will stop working and the indicator will flash with red / yellow color to indicate the malfunction. The controller will auto-recover after a short time when the condition is corrected. Red flash: check the output cables and load. Check for and correct any short circuit or load current issues. Load must be constant voltage type. Yellow flash: Check the installation environment to ensure device is operating in the rated temperature range (-4° to 122°F (-20° to 50°C)) and with good ventilation or heat dissipation.
WWW.EVO-LITE.COM • INFO@EVO-LITE.COM • 1-888-887-2980 • ©2023 EVO-LITE, LLC • 6240 W 54TH AVE., ARVADA, CO 80002 • V1–3623