IKEA SJÖSS 30W 1 Port USB Charger Fast Charging Instructions
- June 2, 2024
- Ikea
Table of Contents
IKEA SJÖSS 30W 1 Port USB Charger Fast Charging
Product Specifications
- Input: 100-240 V~, 50/60Hz, Max. 0.9A
- Output:
- 5.0V 3.0A 15.0W
- 9.0V 3.0A 27.0W
- 12.0V 2.5A 30.0W
- 15.0V 2.0A 30.0W
- 20.0V 1.5A 30.0W
- PPS: 5.0-11.0V 3.0A 30.0W
- PPS: 5.0-16.0V 2.0A 30.0W
- Manufacturer: IKEA of Sweden AB
Product Usage Instructions
Connect the Charger
Connect the USB-C charger to a wall socket.
Connect the Device
Insert the USB-C cable end into the USB-C port of the charger and connect the other end to the device you want to charge or power.
NOTE: USB-C cable is not included.
Cleaning Instructions
To clean the charger, unplug it from the power source and wipe it with a dry cloth.
FAQ
- Q: What should I do if the charger causes interference?
- A: If the charger causes interference, try to correct it by following these measures:
-
1. Turn the equipment off and on.
- Ensure proper installation according to instructions.
- Contact customer support for further assistance.
- Q : How should I dispose of the charger?
- A: The crossed-out wheeled bin symbol indicates that the charger should be disposed of separately from household waste. Please hand it in for recycling in accordance with local environmental regulations to reduce waste and minimize negative impacts on human health and the environment.
Read instructions carefully and keep them for future reference.
Product Features
- The USB-C outlet can provide up to 3.0A/30.0W.
- The USB-C charger is compatible with Power Delivery (PD 3.0), Quick Charge (QC4+) and Programmable Power Supply (PPS).
- The USB-C charger supports quick charging of phones and tablets. The charger can also support charging of most laptops. The charging speed is determined by the connected device.
- Built-in safety features protect the USB-C charger from short-circuiting, overheating and overloading.
- The USB-C charger can be personalised with colourful stickers included in the package.
Instructions for use
Connect the USB-C charger to the wall socket. Insert the USB-C cable end into
the USB-C port and the other end to the device you want to charge or power.
NOTE! USB-C cable is not included.
WARNING
- Discard the product if damaged.
- Never use a damaged or faulty USB cable, since this can damage or harm the charger or your device.
- Use only indoors.
- Never submerge the charger in water or other liquids.
- Children should be supervised to ensure they do not play with the product.
- The wall socket must be located near the equipment and must be easily accessible.
Cleaning instructions
To clean the charger, unplug it from the power source and wipe it with a dry cloth.
Good to know
- USB cable length and quality influence charging speed and performance.
- Devices may get warm during charging. This is completely normal, and they will gradually cool down again after they are fully charged.
- Charger operating temperature: 5°C to 35°C (41°F – 95°F).
- Unplug the charger from the power source when not in use.
Technical data
- Model: SJÖSS
- Type: E2301-NA
- Input : 100-240 V~, 50/60, Max. 0.9 A Output:
- 5.0V 3.0A 15.0W,
- 9.0V 3.0A 27.0W,
- 12.0V 2.5A 30.0W,
- 15.0V 2.0A 30.0W,
- 20.0V 1.5A 30.0W,
- PPS: 5.0-11.0V 3.0A 30.0W,
- PPS: 5.0-16.0V 2.0A 30.0W
- Manufacturer: IKEA of Sweden AB
- Address : Box 702, SE-343 81 Älmhult, SWEDEN
FCC
This device complies with Part 15 of the FCC Rules/Innovation Science and Economic Development Canada’s licence-exempt RSS standard(s).
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation of the device. Operation is subject to the following two conditions:
WARNING:
Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from the household waste. The item should be handed in for recycling under local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or landfills and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>