TG3 ELECTRONICS BLTXR Bluetooth Rugged Rubber Backlit Keyboard Instructions
- June 2, 2024
- Tg3 Electronics
Table of Contents
CLEANING INSTRUCTIONS
FOR MOBILE DATA PRODUCTS
BLTX AND BLTXR KEYBOARDS
-
Turn keyboard off
-
Use a disinfectant wipe to ‘scrub’ down the keyboard
a. If wipes are not available, than spray disinfectant/cleaner onto a cloth and wipe the keyboard down. -
Allow the keyboard surface to dry/evaporate before powering back on
a. This is especially important for the touchpad because it self calibrates upon power up… any chemicals left on its surface can impact its calibration.
Shown below is a chart listing chemicals that have been successfully tested on
TG3’s mobile data products.
If the exact cleaner from the chart below cannot be obtained, mild soap and
water may be used.
TG3 TESTED CLEANING PRODUCTS
Sani-Cloth® HB Wipes (Generic Brand Antibacterial Wipes)
5% Sodium Hypochlorite (Household Bleach Mixed 1:10 w/ Water)
Formula 409®
Palmolive® Liquid Detergent
Phenolic 18 Disinfectant Spray
4615 70th Ave, Kenosha, WI 53144
262.652.2626
info@TG3Electronics.com
www.TG3Electronics.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>