Atongmu GCO5 MINI Projector User Guide
- June 2, 2024
- Atongmu
Table of Contents
MINI Projector GCO5
User Guide
Due to continuous improvement, actual product may different from the manual,
manual is for reference only.
After Sales Email: [email protected]
Safety Notice:
- Please read use manual carefully before you use projector.
- T o prevent the projector from overheating and ensure its reliable operation, it is recommended to install the projector in a well-ventilated place. For example, don’t place the projector on a messy coffee table, sofa, bed, etc. Do not place the projector in a narrow space with poor air circulation, such as a bookcase or closet.
- Do not use this projector near water or wet places. T o reduce the risk of fire and/or electric shock, do not expose this projector to rain or damp.
- Do not install this product near heat sources, such as radiators, heaters, stoves or other heat-generating equipment.
- Use a dry cloth when cleaning.
- Use only the connectors/accessories specified by the manufacturer.
- If this machine is physically damaged or used carelessly, please do not continue to use this machine.Such as the power cord is damaged, liquid spills on the projector, the projector suffers from rain or damp, foreign objects fall into the projector or internal components are loose, etc.
- Do not let objects or liquids enter the projector. Otherwise, it may come into contact with dangerous voltage points and short-circuit components, resulting in fire or electric shock.
- Pay attention to the safety sign on the projector housing.
- This machine should only be repaired by relevant service personnel.
- Before cleaning the product, turn off the power and unplug the power cord from the AC outlet. Wipe the host shell with a soft dry cloth dipped in neutral detergent. If this product is not used for a long time, unplug the power plug from the AC outlet.
- Do not block the slits and openings for ventilation on the equipment.
- Do not use it under the following conditions: extreme hot, cold or humid environment; an area susceptible to a lot of dust and dirt; Near any equipment that generates a strong magnetic field; direct sunlight.
- When using this product, please keep it out of the reach of children and pets to prevent damage caused by the temperature of the device.
- Do not look directly into the lens of the projector when using this projector. Bright light may harm your eyes.
Warning tips:
Please follow all warnings, precautions and recommended maintenance items in
this user guide.
- Warning-For children under 18 months, it is forbidden to use this product. Children over 18 months should use this product in the presence of parents or adults to avoid accidents.
- Warning-Do not look directly at the projector lens when the light bulb is on. Bright light may hurt your eyes.
- Warning-To reduce the risk of fire or electric shock, do not expose this projector to rain or damp.
- Warning-Do not open or disassemble this projector to avoid electric shock.
- Warning-Before changing the bulb, please completely cool the unit.
- Warning-When turning off the projector, make sure to finish the heat dissipation process before unplugging the power cord. The projector needs 90 seconds to cool down.
FCC Warnings:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Preparation before Light on
-
As following picture, connect the power Cable.
-
When power indicating lamp lighting, the equipment processing power.
Power on/Power off
Press“ ”button on projector or remote control to switch on the projector.
User Interface
After projector switched on, following UI will appear after 2-5s starting pictures flash.
Focus
Connection
7.1 Connection Introduction
7.2 Overview
Press the “power on”button, it will enter the main interface after the”power
on”logo appeared for a few seconds.
Main interface review Pre-install application
| |
---|---|---
Local player: Connect the USB disk/ mobile hard disk to play local video|
Local player: Connect the USB disk/ mobile hard disk to play local audio|
Local player: Connect the USB disk/ mobile hard disk to open local txt file
| |
Screen Cast
(Screen Mirror for iOS Device)| MIRROR
(Screen Mirror for Android Device)| DLNA
(Push Video Link)
Realize Screen Mirroring between projector and iphone, ipad, android phone, android tablet, other electronic devices.
7.3 Local Player
Connect the USB flash disk driver to the projector and open local player with
the remote control, then select local disk, USB flash disk driver to open
(videos, pictures, musics and all files) select the file you want to open, it
will be lights around, then press OK to play, press the return key to exit.
Local Player support format as following:
Support
Files
Format| Video| MPEG-1 MPEG-2. MPEG-4ASP MJPEG, DivX3\4\5XViD, H. 264.H 265,
VC-1. WMV3, RV8\9
---|---|---
Audio| MPEG, Audio Layer, WAV(PCM, ADPCM),FLAC APE, AAC(AAC-LC, AAC-HE), PCM
Picture| JPEG, PNG. BMP
7.4 Connection
When connecting a signal source to the projector, be sure to:
- Turn all equipment off before making any connections;
- Use the correct signal cables for each source;
- Make sure the cables are firmly inserted. In the connection illustrations shown below, some cables may not be included with the projector (see standard accessories).They are commercially available from electronics stores. Connecting with video equipment:
| Terminal name | Terminal outward | Function | Picture quality |
|---|---|---|---|
| USB | Local Player | Better | |
| HDMI | HDMI Devices | Best | |
| AV/AUX | DVD Player/Speaker | Better | |
| VGA | Laptop Devices | Better |
7.5 USB Media Play
Input the USB disk to the USB interface, if it connect successfully, the icon
of USB disk will appears in the upper left corner, then choose the Media icon
which you need open your file.(You can see the picture as below as a
reference)
If it shows “No Device” connected via HDMI or USB, under normal circumstances,
this is caused by poor contact of the connector, please unplug and plug it
again, or test it with a new cable. If it still not work, please contact us,
we will reply and give you a solution as soon as possible.
7.6 Connecting Devices
HDMI (High-Definition Multimedia Interface), you can use a HDMI cable connect
the projector with HDMI devices. (HDMI cable included)
HDMI Devices: Laptop, PC, TV Stick, TV Box, Roku, Amazon Fire TV, Chromecast,
Apple TV, PS3,PS4,PS5, X-Box, to HDMI adapter etc.
AV/AUX (Audio & Video/Auxiliary Multimedia Interface), you can use a AV cable
connect the projector with AV devices. (AV cable included) AV Devices: VCD
player, DVD player, TV Box, Speaker etc.
USB (Universal Serial Bus Multimedia Interface), you can insert USB disk or
USB mobile hard disk to USB interface to open video, audio, picture files.
USB Devices: USB disk, USB mobile hard disk etc.
Noted: You can’t connect your phone with projector USB interface by USB cable
directly, you need to buy an extra to HDMI adapter.(Adapter Not Include).
VGA Devices: You can connect your computer or a device with a VGA port.
7.7 Turn on Projector Bluetooth
| 1 Press the Menu button of the remote control (as shown in the picture)
---|---
| 2 The program menu screen appears
| 3 Press the right button of the remote control to the 2nd icon (as shown in
the picture)
| 4 Then press the down button of the remote control to the bottom line (as
shown in the picture) and press the OK button
| 5 There are two switches, “Off ” and “On”; select “On” directly
6 Bluetooth is turned on, and searching for connected devices
| 7 Back to the main page, the page will appear Bluetooth icon (as shown in
the picture)
Note: Bluetooth function is ONLY for audio transfer with audio devices, NOT supporting video sync with smartphones and computers.
7.8 Set Projector connect to WIFI
| 1 Turn on the projector and select WiFi Settings
---|---
| 2 Turn on the network
| 3 Click wireless on the right
| 4 Choose your wireless
| 5 Click OK in the password space
| 6 Input the password from the soft keyboard, and click enter
| 7 Click the Connect button
| 8 The Wi-Fi connection is successful
7.9 IOS/Mac Mirror or Android Mirror
IOS/Mac Mirror
| 1 Choose Mirror icon
---|---
| 2 Select the IOS option
| 3 Connect to the Projector
| 4 Open Screen Mirror on your iPhone, then connect to projector
Android Mirror
| 1 Choose Mirror icon
---|---
| 2 Choose Android mirroring in the projector homepage
| 3 Waiting for smartphone to connect
| 4 Choose the “Screen Mirror” in the smartphone setting
Warm Tips: Please connect your mobile phone and projector to the Same WIFI router.
Projection Distance and Screen Size
| Image Size(Inch) | Projection Screen L+W(cm) | Picture quality(m) |
|---|---|---|
| 30 | 0.67*0.36 | 0.8 |
| 40 | 0.91*0.5 | 1.1 |
| 50 | 1.13*0.62 | 1.36 |
| 60 | 1.36*0.75 | 1.62 |
| 70 | 1.57*0.86 | 1.85 |
| 80 | 1.78*0.98 | 2.09 |
| 100 | 2.20*1.2 | 2.53 |
| 200 | 4.4*2.4 | 5 |
Specification Parameter
| Item | Description |
|---|---|
| Imaging Technology | Single LCD Projection Technology |
| Resolution | 1920*1080 pixels (30Hz) |
| Light | LED |
| LED Life Time | 50,000 hours |
| Focus Mode | Manual operation |
| Projection Distance | 0.8-5M |
| Projection Size | 30-200inches |
| Projector Ratio | 1.6:1 |
| Aspect Ratio | 4:3/16:9 |
| Color | White |
| Consumption | LED：75W；Other：12W |
| Contrast | 2000:01:00 |
| AC Power Supply | AC 100~250V |
| System support | Multi-media(Music, Picture, Video, TXT) |
| Projection Method | Front Table, Frort Ceiling, Rear Table, Rear Ceiling |
Disclaimer :
Our company reserve the right to make changes to the contents of this
instruction manual without any advance notice. Continuous upgrading of the
software may bring some differences to the OSD operation menu and the picture
of this instruction manual but does not affect the normal operation of the
functional operation described in this instruction manual. We are sorry if
this brings inconvenience to you, please kindly understand.
Note:5G band (W52) indoor use
Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However. there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, this equipment
should be installed and operated with minimum distance of 20cm the radiator
your body. This device and its antenna(s) must not be co-located or operation
in conjunction with any other antennanr transmitter.