AdHoc i.Mill Electric Arc Table Lighter Instruction Manual
- June 2, 2024
- AdHoc
Table of Contents
AdHoc i.Mill Electric Arc Table Lighter
Specifications
- High-performance Ceramic Grinding Mechanism
- USB-C Chargeable
- Aroma-tight Lid
Product Usage Instructions
Adjusting the Grinding Setting
- To adjust the grinding setting, turn the adjusting screw 4 clockwise for fine grinding and counterclockwise for coarse grinding.
Information for Use
- Hard salt grains and moisture-absorbent salt may cause congestion in the grinder.
- If this occurs, turn the mill upside down while pressing the switch button and shake lightly to release any blockages.
FAQ
- Q: What should I do if my grinder gets jammed?
- A: If your grinder gets jammed, turn it upside down while pressing the switch button and shake lightly to release any blockages.
- Q: How do I adjust the grinding setting?
- A: Turn the adjusting screw clockwise for fine grinding and counterclockwise for coarse grinding.
Operating Instructions
Diagram of the components
- Motorblock/Casing
- Push on Switch Button
- Spice container
- Adjusting screw
- High-efficiency ceramic grinder CeraCut®
- Aroma-tight lid
- Charging connection
- USB-C charge cable
FILLING IT UP
WITH PEPPER OR SALT
Holding the mill by the housing 1 with one hand, grip the spice container 3
with the other hand. Twist the two halves in opposite direction at the same
time to open the bayonet catch.
Ready to Mill
Push on the switch button 2 and ground spice will be dispensed and the light
bulb will illuminate. Make sure that the aroma-tight 6 lid is open.
Note
If grinding flow becomes lesser and lesser, shake the unit to help the spice
falling into the grinder. The grinding flow will be back to normal right away.
Information for use
The hardness of salt grains and the moisture-absorption character of salt may lead to congestion of the grinder. This can also happen with hard pepper corns. In this case, turn the mill upside down with the switch button pressed and assisted by a little shaking to release the jammed salt from grinder.
ADJUSTING
THE GRINDING SETTING
By turning the adjusting screw 4 clockwise the high-efficiency ceramic grinder
CeraCut® 5 is adjusted to fine grinding. Coarse grinding is achieved by
turning it in the opposite direction.
CHARGING
Insert the USB-C charge cable 8 into the charging port& at the base of the
product. The electric arc table lighter can now be charged at a USB port.
STATUTORY WARRANTY
The statutory warranty applies for the whole AdHoc range from the purchase date. In addition to this, we grant a 30-year guarantee on our high-perfor- mance ceramic grinder CeraCut®. If defects arise during this period, we will bear the costs of shipping, repair and/ or replacement of the detective pro- duct. We offer no guarantee for damage due to improper and incorrect use. A warranty claim in the framework of the statutory warranty only exists upon the presentation of proof of purchase. lo make a claim, please contact your AdHoc specialist retailer.
CONTACT
- AdHoc Entwicklung und Vertrieb GmbH
- Im Pfeifferswörth 16
- 68167 Mannheim – Germany
- www.adhoc-design.de
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>