JiaYouJia 7-Light Modern Linear Kitchen Island Light Gold Chandelier Instruction Manual

JiaYouJia 7-Light Modern Linear Kitchen Island Light Gold Chandelier

Important Safety Instructions

BEFORE INSTALLING FIXTURE, MAKE SURE THE POWER TO THE CIRCUIT 15 TURNED OFF AT THE MAIN FUSE BOX/ CIRCUIT BREAKERUTILITY BOX.

• These instructions are provided for your safety. It is very important that they are read carefully and completely before beginning the assembly and installation of this lighting fixture.
• We strongly recommend that a professional electrician install all direct wire fixtures.
• The lighting fixture is meant for indoor use.DRY LOCATION ONLY
• It must be connected only to 3-wire, single-phase electrical supply systems.

(provided with ground wire or equivalent protection system)
For your safety, it is strongly recommended that two people install the lighting fixture.

Warning

To reduce the risk of fire, electrical shock or personal injury, always turn off light fixture and allow it to cool prior to replacing light bulb.
Do not touch bulb when fixture is turned on. Do not look directly at lit bulb.
Keep flammable materials away from lit bulb.

Assembly Instructions

• Read these instructions carefully and keep for future refer­ence. Refer to parts inventory for guidance, and ensure you have all pieces before starting.
• When assembling place all parts on a soft, clean, and flat surface such as a carpet to prevent scratches.

Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or hardware.

TOOLS YOU MAY NEED

Note: It is required to be sure as follows before installation

• The light bulbs shall be tested lit before bulbs are assembled and lamp shades are installed.
• The electric wire length needs to be determined in advance.

Parts List

Accessories List

Exploded Views

EXPLODED

Installation Steps

Care and Maintenance

WARNING: Before you perform any cleaning or maintenance work, turn off the electricity at the main circuit breaker panel.

• Wipe the fixture with a damp, soft cloth.
• Do not use any abrasive cleaners or cleaners that contain alcohol.
• When replacing bulbs, use 60-watt MAX for E26/27 bulb and E12/14 bulb, 40-watt MAX for G9 bulb, 20-watt MAX for G4 bulb.

Troubleshooting

Contact a qualified and licensed electrician if you are not capable to solve wiring problems

There is a faulty switch.| Test or replace the switch.
The fuse blows or the circuit breaker trips when the light is turned on.| There are crossed wires or

the power wire is grounding out.

| Discontinue use of the fixture. Check the wire connections or contact a qualified electrician.
Stro| **** Drive Failure| Contact our after-sales service, may need to replace the driver.
Wiring Error| Rewire according to the manual.
Light Source Failure| Replace the light source, if the problem can not be ruled out,

please contact customer service.

Abnormal noise| Drive Failure| Contact our after-sales service, may need to replace the driver.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>