RALPH LAUREN RL2817 Hayles Large Sconce Instruction Manual
- June 12, 2024
- ralph lauren
Table of Contents
RALPH LAUREN RL2817 Hayles Large Sconce Instruction Manual
ASSEMBLY INSTRUCTIONS
Alessandra Large Chandelier Sconce
Item # RL 2280
NOTICE:
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction and
operation of it, as well as the hazards involved. Inspect items and contents
carefully. If any damage or defect is found, do not install it.
Retain all packaging material until installation is complete and approved.
-
Carefully remove all parts from the box.
-
Remove the mounting plate (C) from the fixture body (G) by loosening side screws (B).
-
Affix mounting plate (C) onto the outlet box and secure with mounting screws (D).
-
Attach the rubber washer (N), and crystal disk (F) to the threaded nipple (O) and secure with rubber washer (M), and finial (L).
-
Attach the crystal disk (J) to the threaded nipple (K) and secure with crystal column (I).
-
Remove the candle tube (Q), let the crystal disk (H) pass through the socket, then put the candle tube (Q) into the socket
-
Connect the hot wire (smooth edge, markings) from the fixture to the hot wire from the outlet box (usually BLACK). Fasten them together with a plastic wire connector (A) provided and wrap the connection with electrical tape.
-
Connect the neutral wire (ribbed, no markings) from the fixture to the wire from the outlet box (usually WHITE).
DO NOT REVERSE THE HOT AND NEUTRAL CONNECTIONS OR SAFETY WILL BE COMPROMISED. -
Connect the ground wire from the fixture (bare copper) to the ground wire from the outlet box (usually green or copper in color).
IT IS IMPERATIVE THAT THIS FIXTURE BE GROUNDED. -
Attach the fixture body (G) onto the mounting plate (C) and secure it with side screws (B)
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>