INVISACOOK 230V Burners Design Delivered Instruction Manual

June 2, 2024
INVISACOOK

INVISACOOK 230V Burners Design Delivered

INVISACOOK-230V-Burners-Design-Delivered-product-image

Specifications:

  • Invisacook with 2 burners – 230V
  • Invisacook with 4 burners – 230V
  • Invisacook with 3 burners- 230V
  • Invisacook with 4 burners – 230V
  • Invisacook with 5 burners – 230V

Product Usage Instructions

Positioning the Brackets:
Follow these important notes for proper installation based on ceramic manufacturers’ guidance:

  • Burners should be 10 cm away from any open ends or edges.
  • All corners must have round edges as specified.
  • Use InvisaMat at all times during operation.
  • Use quality induction pots and pans.
  • Maintain a minimum distance of 20 cm from undermount or top mount sink cutouts to the unit frame for stress protection to the stone.

Mounting the Brackets:
To install the brackets:

  • Use a 2-component glue to fix the brackets to the underside of the countertop.
  • For recommended glue, contact the Invisacook team.
  • Place Invisacook on the marked edge and tighten the screws.
  • Once securely attached, the magnetic button on each coil is activated along with the temperature sensor.

Power Connection Information:
Only have Invisacook connected by an experienced electrician.

  • Follow these guidelines: All devices must be connected to 230V only.
  • Alternative Connection Option:
    Invisacook with 3 burners or 4 burners: Black and brown cables are wired together; gray and blue cables are wired together. Connect to the house connection.

FAQ :

  • Q: Can Invisacook be installed without using InvisaMat?
    A: No, InvisaMat must always be used when operating the Invisacook system for proper functionality and safety.

  • Q: What type of pots and pans should be used with Invisacook?
    A: Quality induction pots and pans are recommended for optimal performance.

Installation Manual

Contents

  • There are different options, layouts and ways to integrate Invisacook into your kitchen design. We will show you basic options depending on the model purchased.
  • Please follow these instructions and options for the best result of your installation and design.

Note: The instructions provided by Invisacook for installing Invisacook are general instructions. If your countertop manufacturer has other installation instructions, they must be followed to maintain the countertop warranty.

Dimensions of the individual Invisacook units

Invisacook with 2 burners – 230VINVISACOOK-230V-Burners-Design-
Delivered-fig- \(1\)

Invisacook with 3 burners- 230VINVISACOOK-230V-Burners-Design-
Delivered-fig- \(2\)

Invisacook with 4 burners – 230V

Invisacook with 5 burners – 230VINVISACOOK-230V-Burners-Design-
Delivered-fig- \(4\)

Positioning the brackets

INVISACOOK-230V-Burners-Design-Delivered-fig- \(6\)

INVISACOOK-230V-Burners-Design-Delivered-fig- \(8\)

IMPORTANT NOTES FOR PROPER INSTALLATION BY GUIDANCE OF CERAMIC

MANUFACTURERS

  • Burners are to be 10 cm away from any open ends or edges, see diagram below.
  • All corners are to be round edges as instructed by the materials specification for their fabricated slabs.
  • InvisaMat MUST ALWAYS BE USED when operating the Invisacook system.
  • Quality induction pots and pans must be used.INVISACOOK-230V-Burners-Design-Delivered-fig- \(9\)
  • Minimum of 20 cm away from any undermount or top mount sink cutout to the unit frame for best stress protection to the stone.INVISACOOK-230V-Burners-Design-Delivered-fig- \(10\)

Mounting the brackets

  • To install the brackets, use a 2-component glue to fix the brackets to the underside of the countertop. For a recommendation of a 2-component glue, please contact the Invisacook team.
  • In the following pictures you can see the proper installation of the brackets.INVISACOOK-230V-Burners-Design-Delivered-fig- \(11\)
  • Place Invisacook on the marked edge and tighten the screws.
  • Once the unit is securely attached and tightened, the magnetic button on top of each coil is activated along with the temperature sensor.INVISACOOK-230V-Burners-Design-Delivered-fig- \(12\)

Information about the power connection

Only have Invisacook connected by an experienced electrician!

  • All devices must be connected to 230V only.

  • Invisacook with 3 burners, Invisacook with 4 burners:

    • The brown and black cables are wired together.
    • The gray and blue cables are wired together. Have the cables connected to the house connection.
  • Alternative connection option:
    Invisacook with 3 burners, Invisacook with 4 burners:

    • Carefully remove the clip from the black and brown cables.
    • The gray and blue cables remain wired together.
    • Have the cables connected to the house connection.

Information about the power connection
Only have Invisacook connected by an experienced electrician!

  • All devices must be connected to 230V only.

  • Invisacook with 5 burners:

    • The brown, black and purple cables are wired together.
    • The orange, gray and blue cables are wired together.
    • Have the cables connected to the house connection.
  • Alternative connection option:

  • Invisacook with 5 burners:

    • Carefully remove the clip from the black, brown and purple cables.
    • The gray, blue and orange cables remain wired together.
    • Have the cables connected to the house connection.

2 burner unit

  • lnvisacook 2 burners:
    • 230V ac 50-60Hz
    • 3,6 kW total shored
    • recommended minimum cable supply: 3G 2,5mm

3- and 4-burner-unit

  • lnvisacook 3 and 4 burners:
    • 230V ac 50-60Hz
    • 7,2 kW total shored
    • recommended minimum cable supply : 3G 6mm

5 burner unit

  • lnvisacook 5 burner:
    • 230V ac 50-60HZ
    • 10,2 kW total shored
    • recommended minimum cable supply: 3G 10mm

Drawer slide out controller option

INVISACOOK-230V-Burners-Design-Delivered-fig- \(20\) Drawer size option depending on cabinet width, with hole cutout size to drop in controller in 15cm drawer or bottom of existing drawer.

INVISACOOK-230V-Burners-Design-Delivered-fig- \(21\)

Cabinet position when installing in a drawer in drawer option, or bottom

of existing drawer

INVISACOOK-230V-Burners-Design-Delivered-fig- \(22\)

Cabinet face front controller installation

INVISACOOK-230V-Burners-Design-Delivered-fig- \(24\)

INVISACOOK-230V-Burners-Design-Delivered-fig- \(25\)

Cabinet position when installing a wall oven under the Invisacook unit

INVISACOOK-230V-Burners-Design-Delivered-fig- \(26\)

Controller dimensions

INVISACOOK-230V-Burners-Design-Delivered-fig- \(28\)

INVISACOOK-230V-Burners-Design-Delivered-fig- \(29\)

Units performance and consumption

5 burner unit – 230V

  • Top left: nominal power: 1400W(LEVEL 9) /1600W(boost)
  • Bottom left: nominal power : 1200W(LEVEL 9) /1400W(boost)
  • Middle: nominal power: 1400W(LEVEL 9) /1600W(boost)
  • Top right: nominal power: 1400W(LEVEL 9) /1600W(boost)
  • Bottom right: nominal power: 1200W(LEVEL 9) /1400W(boost)
  • Max power for five burners are 5.600W.

5 burner unit

Level| Left top| Left below| Level| | Stufen| Middle| | Level| Right top| Right below| Level
P| 1600W| 0-W| 0| | P| 1600W| | P| 1600W| 0-W| 0
9| 1400W| 600W| 1| | 9| 1400W| | 9| 1400W| 600W| 1
8| 1200W| 650W| 2| | 8| 1200W| | 8| 1200W| 650W| 2
7| 900W| 700W| 3| | 7| 900W| | 7| 900W| 700W| 3
6| 850W| 750W| 4| | 6| 850W| | 6| 850W| 750W| 4
5| 800W| 800W| 5| | 5| 800W| | 5| 800W| 800W| 5
4| 750W| 850W| 6| | 4| 750W| | 4| 750W| 850W| 6
3| 700W| 900W| 7| | 3| 700W| | 3| 700W| 900W| 7
2| 650W| 1000W| 8| | 2| 650W| | 2| 650W| 1000W| 8
1| 600W| 1200W| 9| | 1| 600W| | 1| 600W| 1200W| 9
0| 0-W| 1400W| P| | 0| 0-W| | 0| 0-W| 1400W| P

4 burner unit – 230V

  • Top left: nominal power: 1400W(LEVEL 9) /1600W(boost)
  • Bottom left: nominal power : 1200W(LEVEL 9) /1400W(boost)
  • Top right: nominal power: 1400W(LEVEL 9) /1600W(boost)
  • Bottom right: nominal power: 1200W(LEVEL 9) /1400W(boost)
  • Max power for four burners are 4.000W.

4 burner unit

Level| Top left| Bottom left| Level| | Level| Top right| Bottom right| Level
P| 1600W| 0-W| 0| | P| 1600W| 0-W| 0
9| 1400W| 600W| 1| | 9| 1400W| 600W| 1
8| 1200W| 650W| 2| | 8| 1200W| 650W| 2
7| 900W| 700W| 3| | 7| 900W| 700W| 3
6| 850W| 750W| 4| | 6| 850W| 750W| 4
5| 800W| 800W| 5| | 5| 800W| 800W| 5
4| 750W| 850W| 6| | 4| 750W| 850W| 6
3| 700W| 900W| 7| | 3| 700W| 900W| 7
2| 650W| 1000W| 8| | 2| 650W| 1000W| 8
1| 600W| 1200W| 9| | 1| 600W| 1200W| 9
0| 0-W| 1400W| P| | 0| 0-W| 1400W| P

3 burner unit – 230V

  • Left: nominal power: 1400W(LEVEL 9) /1600W(boost)
  • Middle: nominal power: 1200W(LEVEL 9) /1400W(boost)
  • Right: nominal power: 1400W(LEVEL 9) /1600W(boost)
  • Max power for three burners are 3.600W.

3 burner unit

Level| Left| Middle| Level| | Level| Right
P| 1600W| 0-W| 0| | P| 1600W
9| 1400W| 600W| 1| | 9| 1400W
8| 1200W| 650W| 2| | 8| 1200W
7| 900W| 700W| 3| | 7| 900W
6| 850W| 750W| 4| | 6| 850W
5| 800W| 800W| 5| | 5| 800W
4| 750W| 850W| 6| | 4| 750W
3| 700W| 900W| 7| | 3| 700W
2| 650W| 1000W| 8| | 2| 650W
1| 600W| 1400W| 9| | 1| 600W
0| 0-W| 1200W| P| | 0| 0-W

2 burner unit – 230V

  • Top: nominal power: 1400W(LEVEL 9) /1600W(boost)
  • Bottom: nominal power: 1200W(LEVEL 9) /1400W(boost)
  • Max power for two burners are 2.000W.

2 burner unit|
---|---
Level| Top| Bottom| Level
P| 1600W| 0-W| 0
9| 1400W| 600W| 1
8| 1200W| 650W| 2
7| 900W| 700W| 3
6| 850W| 750W| 4
5| 800W| 800W| 5
4| 750W| 850W| 6
3| 700W| 900W| 7
2| 650W| 1000W| 8
1| 600W| 1200W| 9
0| 0-W| 1400W| P

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals