JEPRECO 34 Tall Plant Stand Indoor Installation Guide

June 2, 2024
JEPRECO

JEPRECO 34 Tall Plant Stand Indoor

JEPRECO-34-Tall-Plant-Stand-Indoor-product

Specifications

Component Quantity Description
Upper Frame (A) 2 Metal frames for the upper part of the stand
Lower Frame (B) 2 Metal frames for the lower part of the stand
Lower Board (C & D) 2 Wooden boards for base and shelf
Lower Cross Rod (E) 2 Metal rods for lower frame support
Screws (F, G, H) 14 Assorted screws for assembly
Foot Pad (I) 6 Adhesive pads for stability

Attention

  1. Please check if all accessories are complete before installation.
  2. Please pay attention to the installation direction of each part in the illustration when installing.
  3. Please wait until all accessories are installed, stand the whole plant stand straight, adjust the balance, and then tighten the screws.
  4. Please finally stick 4 foot pads on the 4 bottom corners of the plant stand. If it is still not balanced enough, please consider sticking another foot pad on the unbalanced corners.

FAQ

  • What should I do if my plant stand is not balanced?
    • After assembling, if the plant stand is not balanced, adjust the position of the foot pads or add an additional foot pad to the unbalanced corner(s).
  • Can I assemble the plant stand without using all the screws?
    • No, all provided screws should be used during assembly to ensure the stability and safety of the plant stand.
  • How many foot pads should be used?
    • Typically, 4 foot pads are used, one on each bottom corner of the plant stand. However, if necessary, additional foot pads can be used for balance.

Parts And Tools

JEPRECO-34-Tall-Plant-Stand-Indoor-fig-1

Installation Overview

JEPRECO-34-Tall-Plant-Stand-Indoor-fig-2

Attention

  1. Please check if all accessories are complete before installation.
  2. Please pay attention to the installation direction of each part in illustration when installing
  3. Please wait until all accessories are installed, stand the whole plant stand straight, adjust the balance, and then tighten the screws
  4. Please finally stick 4 foot pads on the 4 bottom corners of plant stand. If it is still not balanced enough, please consider sticking another foot pad on the unbalanced corners

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals