Chuangsheng G58 LED Wireless Bluetooth Speaker User Manual
- June 16, 2024
- Chuangsheng
Table of Contents
G58 LED Wireless Bluetooth Speaker
Product Manuals：
I, wireless charging use: insert the charger automatically open the wireless charging
- Long press to turn on/short press to switch the light .
- Long press to switch BT/NS/FV mode, short press to pause/play
- short technique timer 15/30/60, long press bluetooth linking
- Short press next song, long press to increase volume .
- Short press previous song, long press volume down
- Alarm clock setting
- Clock setting
Second, the technical parameters
- Wireless charging power: 15W
- Bluetooth version: 5.3
- Bluetooth name: BT3401
- Output power: 5W
- Bluetooth frequency: 2.4GHz-2.48GHz
- Transmission distance: 10 meters
- Frequency range: 50HZ-20KHZ
- the whole signal-to-noise ratio: greater than 75d6
- built-in lithium battery voltage: 3.7V
- Charging input: DC9V/2A
- Product size: 235 80 238mm
- Product weight: 770g
Key function operation instructions
Power on: Long press the power on button for two seconds to power on,
power on default warm light
Second, the use of Bluetooth function:
-
This audio supports the use of Bluetooth devices with A2DP function, the default power on into Bluetooth
Bluetooth mode, the blue light of the Bluetooth indicator flashes, accompanied by voice prompts, this time the audio is waiting for the pairing and connection state, only in this state, can be paired with the Bluetooth audio and connected. -
Cell phone connection
The first step is to open the cell phone Bluetooth setting switch in the cell phone settings, click on the search device.
The second step, when the available devices show BT3401 characters that the phone to find
Bluetooth audio ah, click BT3401 into the pairing mode, the phone and audio
pairing success, there will be a voice mention not and show that they are
connected.
TWS pairing function (this function is only suitable for Bluetooth mode)
When you have two BT3401 Bluetooth stereo, by long press one of the key
pairing, Bluetooth mutual connection, the two
The sound will automatically become the left and right channels to produce
stereo surround sound effect, realizing the real wireless stereo.
Lighting
- BT3401 Bluetooth speaker is equipped with 13 kinds of lighting effects.
- Default warm light effect when the device is turned on, lightly press the light button to adjust the light.
FM radio use:
M key long press to switch to FM function, connect the charging cable to the
product type-c interface as a radio antenna, the other end does not need to be
connected to any device, through the pause key short press into the radio
station automatically search and automatically save, so that the electric
cooperation through the ten / – for the radio station selection of their own
save.
To use the TF card/disk function, insert the TF card/disk into the card:
Insert the TF card / disk into the card slot, the corresponding language
prompts will appear, the product will automatically read the card audio files
and play, the user can use the speaker ten / a button to control the music
size sound.
Clock Setting
Short press the question key into the clock/minute setting, press +/state bean
section hours/minutes
Alarm setting
Short press the alarm key to enter the clock/minute setting, press +/21/-/41
to adjust the hour/minute, change the time and then short press the alarm key
and then press +/M/-/M to select your favorite alarm, there are? Groups of
alarms
The ringtone can be selected, finally Ran press the alarm button to turn on
the alarm (the alarm logo appears on the screen after successful setting).
Press any key to turn off the alarm when the alarm is on, and the alarm will
be turned off automatically after 1 minute when no one turns off the alarm
(the alarm will ring normally even when the power is off, so you don’t need
the alarm).
When you don’t need the alarm, please Cancel the alarm)
Cancel the alarm: Long press the alarm button (the alarm logo will disappear
after canceling successfully).
White noise use:
Press and hold the M key to switch to white noise mode, press +/M/-/M to
select your favorite sleep music.
Safety Instructions:
- Do not expose the product to water or wet areas such as bathrooms.
- Do not hit or drop the product to avoid manual damage.
- Turn off the power when not in use for a long time.
Warranty and after-sales service:
If you have any problems in the process of using, please feel free to contact us, we are negative tribute to every customer.
FCC warning:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation
is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.