yurun S11 Wireless Speaker User Manual
- May 15, 2024
- yurun
Table of Contents
yurun S11 Wireless Speaker
Attention
Please read and keep this Manual,adn pay attention to the below warnings.
NO strong impact on the machine.
Do not use when you are close to the strong magnetic or electric field.
Do not disassemble,repair and rebuild.
Do not clean the machine by water.
Low power consumption may cause distortion of the sound , please charge in
time .
Please disconnect the power supply if you are not going to use it for quite
some time .
The charging voltage is 5V,The speaker’s internal chip will be burned out and
couldn’t work normall if using higher charger.
Specification
Wireless version:Wireless5.0+EDR
Speaker:Double Speakers 45mm *2+one passive speaker
SNR:≥85db
FM Frequency Range :87.5-108Hz
Frequency Response:100Hz-16KHz
Battery: Lithium Battery
Audio format: Mp3
Playing Time : 6~8 Hours
Input Voltage:5V 1A
Product size:180mmX63mmX44mm
Buttons Instruction
Operation Guide
Charging description
The Micro interface is connected with the 5V 1A charger, and the charging process is bright red.After the color is full, the red indicator lights go off, and the working state is full about 3 hours after the shutdown.
ON/OF
When turn ON/OFF the key to the ON position and the indicator light is bule
,It works;OFF,not.
Mode Witching
When the speaker is connected to multiple audio sources, you can switch by long-press the ” ” key for 2 seconds mode.
Wireless connection
-
One-to-one connection
After opening the loudspeaker box, when there is no other device connection, the default access to search matches. The blue light flashes into the search pairing state. At this point, turn on the mobile phone’s BT wireless search device and find the device name “SPEAKER 5.0”. Click the connection and the pairing will be successful. -
One-to-two connection
After two loudspeaker boxes opening, long-press the switch button for 2 seconds and release it after the speaker box is prompted. At this point, the spaker box prompt light flashes rapidly and enters the matching mode of the search box After waiting 6-8 seconds, the two speakers are connected to each other successfully, and the blue indicator of the speakers is always on. At this point, you can use the mobile phone search device name “SPEAKER 5.0” to click the paired connection to connect one phone to two speakers.
Music Mode
After the speaker is started up, insert the TF card or usb drive, and the speaker will automatically play the audio files in the TF card of the usb drive. Short press or to switch songs, press + or – to adjust the sound box volume, short press key to play suspended music.
Hands-free calls
When the speaker is connected, press the button on the speaker to answer the call when someone calls into the phone. When the call is over, press the button again to hang up the call.
AUX Mode
After the speaker is turned on, insert the 3.5mm audio cable and select the input mode of the sound source,and then connect the other end of the 3.5mm audio cable to the headphone jack of your computer or mobile phone to act as an external speaker.
After the speaker is started up, plug in the 3.5mm audio cable as an external antenna and switch the speaker to FM mode by long pressing the key . At this time, Radio auto search pressing the key,the blue indicator light of the sound box flashes rapidly, and the radio station is searched automatically. At this time, no other operation is required.After finished, radio channels can be switched through pressing or .
Package Include
SPEAKER
| USB CABLE| USER MANUAL
---|---|---
1pcs
| 1pcs|
1pcs
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 0cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>