WTSJ TECHNOLOGY D13 Heated Eye Mask Instruction Manual

WTSJ TECHNOLOGY D13 Heated Eye Mask

D13 Heated eye mask

• Model: D13
• Working voltage : DC 5V
• Charging current: 0.9A
• Working current: 50mA-1100mA
• Power used : 3.7W
• Battery ca pa city: 1200mAh
• Product weight : 169g
• Executive standard: QB/T QB 1108.02-2016
• Quality inspection: qualified products
• Place of origin : Made in China

Key function end charging Indication

Functional Operation Description

1. Long press for 3 seconds to switch on and off the device, Bluetooth mode wlll be entered by default, and, Blootooth mode prornpt1one will be played.
2. Press the button to turn on the firstge11r hei1ting mode, and light up the first gear heating lamp/35 degrees;
3. Press the button again to turn on the Z-gear heating mode. and light up the 2 gear , heuing lomp/4Q degrees;
4.  Press the button illg1in to turn on the 3 gri1de he1ting mode. and light up the 3 grade heating lamp/45 degrees;
5. Press the button again to turn off the heating
6. Double-dick the button to enter the vibration ma.sage mode in the fir$! gear, and the musege indic11tor light is green;
7. Double click the button again to enter the second vibration massage mode, and the massage indicator light Is blue.
8. D01,,1ble click the button again totutn off the vibration mnssage mode.

This machine supports Bluetooth connection; Whan you need to listen 10 music or other audio frequency, conned within 3 minutes,ftetstairting the machine. The conneition method is the Hme H the univen•I Bluetooth connection.The default Bluetooth name is CFJG.

The charging method

1. When charging. please use a normal charging adapter of SV/1Aor above.
2. Before using the product.. please use the charging cable provided by the factory to fully charge the product.
3. When charging, 1he battery Indicator light 11 bright and blue light 11 full.
4. The charging 11me of this product ls about2 hours; Do not charge fora long time, which may affect the service life of the Internal mainboard and battery.
5. Low power indicator: The red indicator is steady on.

Maintenance

1.  Clean the skin around the eyes as much as possible before use. If the product is used with wet eye patch, it is recommended to apply the plastic wrap on the surface of the flannelette.
2. This product can be cleaned by toothbrush with a small amount of water or alcohol; After cleaning, place it in a ventilated environment to air dry.
3. The product should not be exposed to sunlight or high temperature for a long time.

Note

1. This product adopts lithium battery, which can be used repeatedly after charging; Remember not to keep charging for a long time, It will seriously affect the battery and product life.
2. This product ls not In use, please keep In the shutdown state. (A hot compress course of this product Is 15 minutes; Automatically turn off the hot compress function after 15 minutes: If you want to continue using, please re-open the hot compress)

Warning: This product has a hot surface. Use with caution for people who are not sensitive to heat. Avoid burning caused by prolonged hot compress.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference
2. this device must accept any interference received, including interference that may cause undesired operation.
   Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>