NORTH STAR STAR M157143A.1 Soft Wash Telescoping Wand Tripod Owner’s Manual
- June 4, 2024
- NORTH STAR
Table of Contents
NORTH STAR STAR M157143A.1 Soft Wash Telescoping Wand Tripod Owner's Manual
Hazard Signal Word Definitions
Warning Label Location
Always make sure safety labels are in place and in good condition. If a safety label is missing or not legible, order new labels or unsafe operation could result. To order replacement safety labels, call NorthStar Product Support at 1-800-270-0810.
Using the Tripod
⚠ WARNING
- Read instructions below carefully.
- Damaged equipment could result in property damage or personal injury.
- Replacement parts. If a part needs replacement, only use parts that meet the manufacturer’s specifications. Replacement parts that do not meet specifications may result in a safety hazard.
Exploded View and Parts Breakdown 157143 Rev A.1
Limited Warranty
Dear Valued Customer:
The NorthStar product you just purchased is built with the finest material and
craftsmanship. Use this product properly and enjoy the benefits from its high
performance. By purchasing a NorthStar product, you show a desire for quality
and durability. Like all mechanical equipment this unit requires a due amount
of care. Treat this unit like the high-quality piece of machinery it is.
Neglect and improper handling may impair its performance. Please thoroughly
read the instructions and understand the operation before using your product.
Limited Warranty
NorthStar shall warranty any piece of equipment manufactured, or parts of
equipment manufactured, to be free from defects in material or workmanship for
a period of 2 years for non-commercial/nonrental use and a period of 90 days
for commercial/rental use from the date of purchase by user.
NorthStar shall warranty any wear item to be free from defects in material or
workmanship for a period of 90 days from the date of purchase by user. This
warranty applies to the original purchaser of the equipment and is
nontransferable. Verification of purchase is the responsibility of the buyer.
Parts will be replaced or repaired at no charge, except when the equipment has
failed due to lack of proper maintenance. Any misuse, abuse, alteration or
improper installation or operations will void warranty. Determining whether a
part is to be replaced or repaired is the sole decision of NorthStar.
NOTE: Some services performed by parties other than NorthStar may void
warranty.
This warranty covers parts only. It will not provide for replacement of
complete products due to defective parts. Components not manufactured by
NorthStar are guaranteed by their manufacturer and can be serviced at factory-
authorized locations near you. Any costs incurred due to replacement or repair
of items outside of a
NorthStar approved facility is the responsibility of the buyer and not covered
under warranty. NorthStar can supply you with the service center location in
your area.
This warranty specifically excludes the following; failure of parts due to damage caused by accident, fire, flood, windstorm, acts of God, applications not approved by NorthStar in writing, corrosion caused by chemicals, use of replacement parts which do not conform to manufacturer’s specifications, and damage caused by vandalism. Additional exclusions: loss of running time, inconvenience, loss of income, or loss of use, including any implied warranty of merchantability of fitness for a specific use.
Warranty does not cover items subject to normal wear such as tires,
receptacles or any part subject to direct physical contact by the public. This
warranty does not cover any personal injury or damage to surrounding property
caused by failure of any part.
This warranty is in lieu of any other warranty expressed or implied and
NorthStar assumes no other responsibility or liability outside that expressed
within this warranty.
Please fill in the following information and have it on hand when you call in
on a warranty claim.
Customer Number:
Date of Purchase:
NorthStar Serial Number:
Item Number:
Manufactured by Northern Tool & Equipment Company, Inc.
Burnsville, Minnesota 55306
www.northerntool.com Made in China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>