GOYOJO C10 Infrared Thermal Imaging Telescope Instruction Manual

GOYOJO C10 Infrared Thermal Imaging Telescope Instruction Manual

IMPORTANT INSTRUCTIONS – READ BEFORE USE

**** Ans dtherisnuonccoirocluemd sintafnracreesd(mpoowneorcuolnaroursoeffs )himghulsyt stehnesiltoicvke thheeardmbael sdeinresoctrlsy, raeimfleecdtioatn,aesttcr.o),nogthraedrwiaitsieonitswouilrlcPee(rsmuachneanst tdhaemsaugne, tdoireucntcolaoslerd binefarmareodr
Uoslevaenletsnos rclsohtahrpanadndclheanrdwoabtjeercttos gtoencltelyawn itphe ainnfdracrleedanle. nDso, nsootaus sneoot rtgoanic

When laser pointer is enabled, do not shine directly into eyes to avoid

injury.

Wehceensstahrey,inchstarrugme eitnftoirstuhsreed hforurtshebefiforsrte tuimsine,g pitl.eaWsheecnhcehcakrgthinegpvoiawUerS.
BIf, mDoatnteorts ocapnenontlhyebecacsairnrgiedoroumt obdyiafyutiht owriiztehdoupterasuotnhnoerlizoaf ttihoenc. oMmapinatneyn. ance

The main parameters

Model:C10/C15 Detector: 256x 192-pixel vanadium oxide uncooled focal plane Lens focal length: lOmm/15mm Noise equivalent temperature difference: <40mk@30°C Sampling frequency: 50Hz Focus mode: manual focus

Product Description

1. Power Indicator Light  Camera
2. Button Digital
3. Zoom Button
4. Palette Button
5. Palette Button
6. Power Button
7. Vision Adjustment
8. Knob Laser Indicator
9. Light Lens Cap
10. Eyepiece/Display
11. Charging Port

Quick Guide

Button and Function Description

Power Button

Long press the power on/off button, and the green indicator light of the instrument is always on after turning on.
After powering on, short press to put the display into sleep mode. The device can be woken from sleep by pressing any button.

Palette Button

Short press to switch the color scale, there are five color scales in total Long press to enter menu mode.
Short press  or  to select a menu item.

Digital Zoom Button

Long Press to digitally zoom in 1x, 2x, or 4x magnification. (Note: Zooming in is not possible in hot spot mode )

 Camera Button

Short press to capture a photo.
Long press to start video recording, short press again to stop recording.

Palette Button: Long press to enter menu mode.
Short press      or to switch menu items.

Contrast Setting ：Adjustable from 0 to 100%, the factory default is 50%. Press                  orto adjust based on environment.
Brightness Setting : Adjustable from 0 to 100%, the factory default is 20%. Press or to adjust based on environment.
Detail Enhancement Setting： Adjustable from 0 to 15, the factory default is 10.Press or       to adjust according to the site environment to obtain a clearer image.
Red Display Setting ：Adjustable from -100% to 100%, the factory default is 15%, This sets range for triggering red display. Press    or          to adjust based on environment.

WIFI On/Off Function Setting : Press or

to turn WIFI Off or enable WIFI (AP)mode; When WIFI is enabled, an icon will display in the upper right corner of the image; After powering off and restarting the device, WIFI is off by default. You will need to re-enable it; The (AP) mode settings are saved and will not be initialized.
Note: Turning on WIFI for a long time will increase the power consumption of the instrument and shorten the standby time of the instrument. Please turn off this function when not in use.

AP Mode: – Install the app “IR-TRACKER V” on your phone/tablet.

• Locate the device hot spot using the model and serial number found on the side of the unit (e.g., C10_230150).
• Connect to the hot spot and enter the password “12345678”.
• Once connected, open the “IR-TRACKER V” app and tap “Connect” to view the
• Functions such as photo taking, video recording, playback, and storage control of images can be realized through the mobile phone client

Type-C charging/data interface/video output

When charging, remove the interface cover at the bottom of the instrument and plug in the Type-C charging cable (voltage DC5V/2A) for charging.
The red indicator light is on when charging, and the green indicator light is on when charging is complete.
Open the interface cover at the bottom of the instrument, connect to the computer with the Type-C USB interface, and copy photos and video data files.
When using, open the bottom of the instrument and insert the Type-C cable, which can be connected to the display or other long-distance transmission.

Warranty

1. **** The whole machine is guaranteed for one year, and the accessories are guaranteed for six
2. During the warranty period, if the product fails, please contact our email: m@goyojo.com
3. The warranty liability is limited to the fault repair of the product during the warranty period, and no other responsibilities are

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>