BOSCH GLF 55-6 Professional Palm Router Instruction Manual

: May 15, 2024
: Bosch

Table of Contents

BOSCH GLF 55-6 Professional Palm Router
Product Information
Safety Instructions
Product Description and Specifications
Fitting
Operation
- Starting Operation
Maintenance and Service
Parts And Tools
Declaration of Conformity
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BOSCH GLF 55-6 Professional Palm Router

BOSCH-GLF-55-6-Professional-Palm-Router-product

Product Information

Specifications

Brand: Bosch Power Tools
Model: GLF 55-6 Professional
Weight: 1.4 kg
Speed: 550 min-1
Power: 33000 W
Safety Class: II

FAQ

Q: Can I use the GLF 55-6 Professional for heavy-duty cutting tasks?
- A: The GLF 55-6 Professional is suitable for a variety of cutting tasks but may not be ideal for heavy-duty cutting. For heavy-duty tasks, consider using tools specifically designed for such applications.
Q: How do I know when to replace the carbon brushes?
- A: Monitor the performance of the power tool. If you notice decreased power or sparking from the motor, it may be time to replace the carbon brushes. Refer to the user manual for specific instructions on replacing them.

Safety Instructions

General Power Tool Safety Warnings

_ WARNING: _Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/ or serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

Personal safety

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

Power tool use and care

Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
Maintain power tools and accessories. Check for mis-alignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

Service

Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.

Safety instructions for edge routers

Hold the power tool by insulated gripping surfaces only, because the cutter may contact its own cord. Cutting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by your hand or against the body leaves it unstable and may lead to loss of control.
The permitted speed of the cutting bit must be at least equal to the maximum speed marked on the power tool. If cutting bits run faster than their rated speed, they may break and fly off.
Routers and other accessories must be able to fit exactly in the tool holder (collet) of your power tool. Application tools that do not fit exactly in the tool holder of the power tool will turn unevenly, vibrate heavily and may cause a loss of control.
Only bring the power tool into contact with the workpiece when switched on. Otherwise there is danger of kickback if the cutting tool jams in the workpiece.
Never rout over metal objects, nails or screws. The router could become damaged and cause increased vibration.
Use suitable detectors to determine if utility lines are hidden in the work area or call the local utility company for assistance. Contact with electric lines can lead to fire and electric shock. Damaging a gas line can lead to explosion.
Penetrating a water line causes property damage or may cause an electric shock.
Do not use blunt or damaged routers. Blunt or damaged routers cause increased friction, create imbalances and may become jammed.
Always wait until the power tool has come to a com-plete stop before placing it down. The application tool can jam and cause you to lose control of the power tool.

Products sold in GB only:

Your product is fitted with an BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorised customer service agent. The replacement plug should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere.

Product Description and Specifications

Read all the safety and general instructions. Failure to observe the safety and general in-structions may result in electric shock, fire and/or serious injury.

Please observe the illustrations at the beginning of this operating manual.

Intended use

The power tool is intended for copy routing as well as routing grooves, edges, profiles and elongated holes in wood, plastic and light building materials while resting firmly on the workpiece.

Product Features

The numbering of the product features refers to the diagram of the power tool on the graphics page.

BOSCH-GLF-55-6-Professional-Palm-Router-fig-2

Drive unit
Routing base
Carbon brush bracket
Nut for routing guide
Chip deflector
Knurled screw for routing base
Router bit a)
Cap nut with collet
Guide plate
Base plate
Dust extraction adapter
Wing bolt for routing base
On/off switch
Handle (insulated gripping surface)
Scale for setting routing depth
Collet
Tool holder
Open-ended spanner (10 mm)a)
Open-ended spanner (17 mm)a)
Guide bushing a)
Parallel guide a)
Wing bolt for parallel guide a)
Guide a)
Wing bolt for fixing horizontal alignment a)
Wing bolt for horizontal alignment of the guide a)
Guide roller a)
Dust extraction adapter a)
Extraction hose a)

a) Accessories shown or described are not included with the product as standard. You can find the complete selection of accessories in our accessories range.

Technical data

Edge router / GLF 55-6

Article number		3 601 FA0 0..
Rated power input	W	550
No-load speed	min–1	33000
Tool holder	mm inches	6

¼

Weight according to

EPTA-Procedure 01:2014

| kg| 1.4
Protection class| | / II

The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models. Values can vary depending upon the product and are subject to application and environmental conditions. For further information www.bosch- professional.com/wac.

Noise/Vibration Information

Noise emission values determined according to EN 62841-2-17.
Typically the A-weighted noise level of the power tool are: 86 dB(A); sound power level 94 dB(A). Uncertainty K = 3 dB.

Wear hearing protection!

Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 62841-2-17: ah = 3.0 m/s2, K = 1.5 m/s2.

The vibration level and noise emission value given in these instructions have been measured in accordance with a standardised measuring procedure and may be used to compare power tools. They may also be used for a preliminary estimation of vibration and noise emissions.

The stated vibration level and noise emission value represent the main applications of the power tool. However, if the power tool is used for other applications, with different accessories or is poorly maintained, the vibration level and noise emission value may differ. This may significantly increase the vibration and noise emissions over the total working period. To estimate vibration and noise emissions accurately, the times when the tool is switched off or when it is running but not actually being used should also be taken into account. This may significantly reduce vibration and noise emissions over the total working period.

Implement additional safety measures to protect the operator from the effects of vibration, such as servicing the power tool and accessories, keeping their hands warm, and organising workflows correctly.

Fitting

Pull the plug out of the socket before carrying out any work on the power tool.

Changing the tool

Wearing protective gloves while fitting and changing router bits is recommended.
Original router bits from the extensive range of Bosch accessories are available from your specialist dealer.

Removing the routing base (see figure A)

Before fitting a router bit, you must first separate the routing base (2) from the drive unit (1).
Open the wing bolt (12) on the routing base (2).
Pull the drive unit out in an upward direction.

Changing the Collet (see figure B)

Depending on the router bit used, you may have to change the cap nut with the collet (8) before fitting the router bit.
If the right collet for your router bit is already fitted, please follow the work steps in the following section.
The collet (16) must sit in the cap nut with a small amount of play. The cap nut (8) must be easy to fit. If the cap nut or collet is damaged, replace it immediately.
Place the open-ended spanner (18) on the tool holder (17) (see figure C1).
Unscrew the cap nut (8) anticlockwise using the open-ended spanner (19).
If required, clean all the parts you want to fit with a soft brush or by blowing them clean with compressed air before assembling them.
Place the new cap nut on the tool holder (17).
Loosely tighten the cap nut.
Do not, under any circumstances, tighten the collet with the tightening nut until a router bit has been fitted.
The collet may otherwise become damaged.

Fitting the router bit (see figure C1 – C2)

Router bits are available in a wide variety of designs and qualities depending on the intended application.
Router bits made of high-performance high-speed steel (HSS) are suited to machining soft materials such as softwood and plastic.
Router bits with carbide tips (HM) are especially suitable for hard and abrasive materials such as hardwood and aluminium.
Original router bits from the extensive range of Bosch accessories are available from your specialist dealer.
Only use undamaged and clean router bits.

Installing the Routing Base (see figure A)

To start routing, the routing base (2) must be fitted back onto the drive unit (1).
Open the wing bolt (12) on the routing base (2).
Slide the drive unit (1) into the routing base (2).
Close the wing bolt (12) on the routing base (2).

Note: The wing bolt (12) and the knurled screw (6) can be exchanged with each other.

After assembly, always check that the drive unit is firmly seated in the routing base.

Dust/Chip Extraction

The dust from materials such as lead paint, some types of wood, minerals and metal can be harmful to human health. Touching or breathing in this dust can trigger allergic reactions and/or cause respiratory illnesses in the user or in people in the near vicinity. Certain dusts, such as oak or beech dust, are classified as carcinogenic, especially in conjunction with wood treatment additives (chromate, wood preservative). Materials containing asbestos may only be machined by specialists.

Use a dust extraction system that is suitable for the material wherever possible.
Provide good ventilation at the workplace.
It is advisable to wear a P2 filter class breathing mask.

The regulations on the material being machined that apply in the country of use must be observed.

Avoid dust accumulation at the workplace. Dust can easily ignite.

Connecting the Dust Extraction System (see figure I)

Insert the adapter for dust extraction (11) into the power tool from the front. It audibly engages. To remove, grasp the side of the adapter (11) and pull it off forwards.
Put an extraction hose (dia. 35 mm) (28) (accessory) on the installed dust extraction adapter (27). Connect the dust extraction hose (28) to a dust extractor (accessory).
The dust extractor must be suitable for the material being worked.
When extracting dry dust or dust that is especially detrimental to health or carcinogenic, use a special dust extractor.

Operation

Products that are only sold in AUS and NZ: Use a residual current device (RCD) with a nominal residual current of 30 mA or less.
Pay attention to the mains voltage! The voltage of the power source must match the voltage specified on the rating plate of the power tool. Power tools marked with 230 V can also be operated with 220 V. Setting the routing depth
The routing depth must only be set while the power tool is switched off.
Place the power tool with a fitted router bit onto the workpiece you want to machine.
Reopen the wing bolt (12) on the routing base (2) in order to set the required routing depth based on the scale for setting routing depth (15) either by hand or with the knurled screw (6).
Close the wing bolt (12) on the routing base (2).
Check the routing depth you have set by carrying out a practical test and correct it if required.

Starting Operation

Switching on/off

To switch on the power tool, set the on/off switch (13) to I.
To switch off the power tool, set the on/off switch (13) to 0.

Working Advice

Protect router bits against shock and impact.
Pull the plug out of the socket before carrying out any work on the power tool.

Routing direction and routing process (see figure D)

BOSCH-GLF-55-6-Professional-Palm-Router-fig-7

Routing must always be carried out with the workpiece being moved against the direction in which the router bit (7) is turning (up cut). If the workpiece is moved in the same direction as the router bit is turning (down cut), the power tool may be pulled out of your hands.
Only use the power tool when the routing base (2) is fitted. Losing control of the power tool can cause injuries.

Note: Be aware that the router bit (7) always protrudes slightly from the base plate (10). Do not damage the template or the workpiece.

Set the routing depth you want.
Switch on the power tool and guide it to the point you want to machine.
Switch off the power tool after routing.

Do not put the power tool down before the router bit has come to a complete stop. Application tools that are still running can cause injuries.

Routing with guide bushing (see figure E1 – E3)

Using the guide bushing (20), you can transfer contours from templates or patterns to the workpiece.
Select the guide bushing that is suitable for the thickness of the template or pattern. Due to the protruding height of the guide bushing, the template must have a minimum thickness of 8 mm (see figure E1).
Select a router bit with a diameter that is smaller than the interior diameter of the guide bushing.
Unscrew the four cylinder screws on the underside of the guide plate (9) and remove the guide plate.
Insert the guide bushing (20) into the guide plate (see figure E2).
Loosely screw the guide plate back onto the base plate (10).
It must still be possible to move the guide plate freely.

To ensure that the distance between the centre of the router bit and the edge of the guide bushing is uniform, the guide bushing and guide plate must (if necessary) be centrally aligned with each other.

Align the guide plate such that the router bit and guide bushing are centred on the opening in the guide plate (see figure E3).
Hold the guide plate in this position and firmly tighten the fastening screw.

To rout with the guide bushing (20), proceed as follows:

Place the power tool with the guide bushing (20) onto the template.
Guide the power tool with the protruding guide bushing along the template using lateral pressure.

Edge or profile routing (see figure F)

BOSCH-GLF-55-6-Professional-Palm-Router-fig-11

For edge and profile routing without a parallel guide, the router bit must be fitted with a pilot pin or a ball bearing. While it is switched on, guide the power tool towards the workpiece from the side until the pilot pin or the ball bearing of the router bit is touching the side of the workpiece edge that you want to machine. Guide the power tool along the workpiece edge. Pay attention that the router is positioned perpendicularly. Too much pressure can damage the edge of the workpiece.

Routing with a parallel guide (see figure G)

You can fit a parallel guide (21) for when cutting parallel to an edge.
Fit the parallel guide (21) to the routing base (2) using the knurled screw (4).
Set the required stop depth using the wing bolt on the parallel guide (22).
While it is switched on, guide the power tool along the workpiece edge with a uniform feed and while applying lateral pressure to the parallel guide.

Routing with a pilot (see figure H)

BOSCH-GLF-55-6-Professional-Palm-Router-fig-13

The pilot (23) helps when routing edges with router bits without a pilot pin or ball bearing.
Fit the pilot to the routing base (2) using the nut (4).
Guide the power tool along the workpiece edge with a uniform feed.
Lateral clearance: To change the amount of material being removed, you can adjust the lateral clearance between the workpiece and the guide roller (26) on the pilot (23).
Loosen the wing bolt (24), set the lateral clearance you want by turning the wing bolt (25), then retighten the wing bolt (24).
Height: Set the vertical alignment of the pilot according to the router bit you are using and the thickness of the workpiece you want to machine.
Loosen the nut (4) on the pilot, slide the pilot into the desired position and retighten the bolt.

Maintenance and Service

Maintenance and Cleaning

Pull the plug out of the socket before carrying out any work on the power tool
To ensure safe and efficient operation, always keep the power tool and the ventilation slots clean.

In order to avoid safety hazards, if the power supply cord needs to be replaced, this must be done by Bosch or by an after-sales service centre that is authorised to repair Bosch power tools.

After-Sales Service and Application Service

Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. You can find explosion drawings and information on spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any questions about our products and their accessories.
In all correspondence and spare parts orders, please always include the 10‑digit article number given on the nameplate of the product.

Great Britain

Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park North Orbital Road Denham Uxbridge UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at: www.bosch-pt.com/serviceaddresses

Disposal

The power tool, accessories and packaging should be recycled in an environmentally friendly manner.
Do not dispose of power tools along with household waste.

Only for EU countries:

According to the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment and its implementation into national law, power tools that are no longer usable must be collected separately and disposed of in an environmentally friendly manner. If disposed incorrectly, waste electrical and electronic equipment may have harmful effects on the environment and human health, due to the potential presence of hazardous substances.

Only for United Kingdom:

According to The Waste Electrical and Electronic Equipment Regulations 2013 (SI 2013/3113) (as amended), products that are no longer usable must be collected separately and disposed of in an environmentally friendly manner.

Parts And Tools

BOSCH-GLF-55-6-Professional-Palm-Router-fig-15

Declaration of Conformity

EU Declaration of Conformity

Edge router / Article number

We declare under our sole responsibility that the stated products comply with all applicable provisions of the directives and regulations listed below and are in conformity with the following standards.
Technical file at: *

BOSCH-GLF-55-6-Professional-Palm-Router-fig-17