Zishen S932 LED Wireless Speaker Instruction Manual
- May 15, 2024
- Zishen
Table of Contents
Zishen S932 LED Wireless Speaker
Product Information
Specifications
- Input Voltage: 5V/3A & 9V/2A
- LED Output: 10W
- Bluetooth Power: 5W
- Transmission Distance: 2-6mm
- Charge Conversion Rate: >75%
- Frequency Response Range: 100-205KHZ
- Product Size: 18670230mm
- Product Weight: 360g
- Product Features: Intelligent remote control, LED ambient light, Bluetooth speaker
Product Usage Instructions
Bluetooth Connection
To connect via Bluetooth for the first time:
- Turn on the product.
- On your mobile device, search for “ZS” in Bluetooth settings.
- Once found, complete the Bluetooth connection.
Remote Control Instructions
The remote control allows you to operate the product with ease.
Ensure the product is within the specified frequency response range for
optimal performance.
Clock Setting Instructions
- Press the clock icon key to enter clock setting mode.
- Use the add + – key to set the time.
- Press the previous button to confirm the time setting.
Alarm Clock Setting Instructions
Set alarms and clock settings conveniently using the remote control.
Caution
Any modifications not approved by the manufacturer may void your warranty.
Ensure compliance with FCC rules for safe operation.
Product Parameter
- Input voltage：5V/3A & 9V/2A
- LED output：10W
- Bluetooth power：5W
- Lighting pattern：LED color ambient light
- Transmission distance：2-6mm
- Charge conversion rate：>75%
- Frequency response range：100-205KHZ
- Product size：18670230mm
- Product weight：360g
- Product features:Intelligent remote control,LED ambientlight、Bluetooth speaker
Function operation description
Clock setting instructions
- Press the clock icon key to enter the clock setting mode.
- Short-press the add + -key to set the time.
- Press the previous button. Full clock beat setting add +-press a key. Minutes time beat setting add + –
- Set the time and press the clock icon button to confirm.
Alarm clock setting Instructions
- Press and hold the clock icon key for three seconds to enter the alarm setting mode.
- Hold down the + – key to set the alarm time
- Press the last key. Add + – to the full clock jump setting Press a key. Add + – to the minute time jump setting
- Set the time by holding down the clock icon button.
- Turn off the alarm Press the pause/Play key to turn off the alarm.
Bluetooth connection
If this is your first time using it, connect to “ZS” on your mobile device
Please follow these steps:
When the product is turned on, the default Bluetooth mode,Mobile phone
Bluetooth search JDS, and complete Bluetooth connection.
Warm tips
“If you are not in Bluetooth mode, please turn on Bluetooth in the phone
Settings. Afterentering Bluetooth mode,
Then connect the Bluetooth. After the pairing is successful, there will be a
voice prompt indicating that the connection has been made.
When Bluetooth is connected to play music, the volume can be adjusted on the
digital display
Remote control instructions
- LIGHT ON / LIGHT OFF
- LED CHANGE THE LIGHT
- Alarm clock&Clock setting： Press + – to set the time & hold + – to set the alarm press the previous key. Add + – to set the full clock skip. Add + – to the minute time jumpsetting
- Temperature and humidity switching
- Sound attenuation
- Accentuated tone
- Previous song
- Next song
- Pause/Playback/Turn off the alarm
FCC Warnning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.
Frequently Asked Questions (FAQ)
How do I adjust the volume when connected via Bluetooth?
When connected to Bluetooth for music playback, adjust the volume using the digital display on the product.
What is the transmission distance for Bluetooth connection?
The transmission distance for Bluetooth connection is between 2-6mm.
How do I set the alarm using the remote control?
Press and hold the clock icon key for three seconds to enter alarm setting mode. Use the + - keys to set the alarm time and follow on-screen prompts to confirm.