GIGALITE HLG102 LED Head Lamp Light Instruction Manual
- May 15, 2024
- GIGALITE
Table of Contents
GIGALITE HLG102 LED Head Lamp Light
LED Headlamp
For Your Safety
Read the manual thoroughly and observe the information contained when using
the device. Keep the manual close by for future reference.
Refer to the information sheet enclosed for important information on the
subjects of safety, disposal, guarantee and product care.
Intended Use
The product is designed for use both indoors and outdoors. The product is intended purely for private use and not for commercial purposes or other usage.
The headlamp is not suitable for lighting rooms within a household.
Observe the Safety Information
Read and observe all the safety information to protect yourself and the environment from any harm. Refer to the information sheet enclosed for the relevant information on safety.
General View
The illustration depicts the headlamp in detail.
- Headband
- Housing
- Floodlight
- Floodlight press switch
- Full beam press switch
- Full beam
- Micro USB port
- Li-ion batter
- Latch
- Cover
- USB-C cable
Symbols
The packaging contains symbols which indicate the illumination properties of the product. The significance of the symbols is explained below
This symbol indicates the brightness in lumen.
The significance of other symbols is explained in the information sheet enclosed.
Checking the Package Contents
Check the package contents carefully before putting the device into operation. lf anything is missing or damaged, please contact our Service partners.
- 1 x LED headlamp (including built-in battery)
- 1 x headband
- 1 x USB-C cable
- 1 x manual
lnserting the Li-ion Battery
- Press the latch 9 upwards and open the cover 10 ·
- Insert the Li-ion battery 8 in the housing 2 ensuring it is properly aligned.
- Close the cover. 10 Pay attention that the latch 9 locks.
The headlamp only fulfils the requirements of the type of protection specified when the cover 10 is closed properly.
Charging the Li-ion Battery
Charge the Li-ion battery fully before attempting to use the device for the first time.
- Open the protective cover from the micro USB port 7.
- Connect the USB cable 11 to the micro USB port 7.
- Connect the USB cable 11 to a USB charger via the USB-A connector.
- A red indicator lamp beside the micro USB port 7 lights up during the charging process.
- Disconnect the USB cable 11 from the micro USB port 7 when the charging process has finished. The indicator lamp beside the micro USB port 7 lights up green when the battery is fully charged.
- Close the protective cover of the micro USB port 7.
The headlamp only fulfils the requirements of the type of protection specified when the protective cover of the micro USB port 7 is closed.
The headlamp is now ready for use.
Operating the Headlamp
The adjustable headband is used 1 to attach the headlamp to your head.
The headlamp has 3 operating modes each for floodlight and full beam.
The operating modes for the floodlight 3 can be selected using the
floodlight press switch 4.
The operating modes for the full beam 6 can be selected using the full
beam press switch 5.
The operating modes for the floodlight 3 and full beam 6 can be
selected independently from each other and combined with each other.
The switching cycle of the headlamp operating modes is as follows: Operating
mode → Operating mode →Operating mode → Off
| Operating mode 1 | Full beam / Floodlight (100% brightness) | |
|---|---|---|
| Operating mode 2 | Full beam / Floodlight energy-save mode (50% brightness) | |
| Operating mode3 | Full beam / Floodlight flashing mode |
Press the floodlight press switch 4 or full beam press switch 5 as often as necessary until the required operating modes has been selected.
Technical Data
Designation HLG102 LED headlamp
Main material ABS
Weight (without battery) 45g
Dimensions 85x 41 x46 mm
Batteries 1 x type 18650, 3. 7 V, 2 000 mAh
llluminant 3 W CREE LED (full beam)
(not replaceable) OB LED (floodlight)
Lighting period Approx. 6.5 hours (compliant with ANSI standard)
Lighting range Max. 90 meters (compliant with ANSI standard)
Brightness Max. 150 lumen
Service life (LED) Approx. 50,000 hours
Functions 3 operating modes, floodlight (maximum brightness (100%),
energy-save mode (50%), flashing mode) 3 operating modes, full beam (maximum
brightness (100%), energy-save mode (50%), flashing mode)
Type of protection IP44 (splashproof)
Manufacturer
GO Europe GmbH
Zum Kraftwerk 1
D-45527 Hattingen
Germany, www.go-europe.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>