BHG-VM Voltmeter Instructions
- May 15, 2024
- BHG
Table of Contents
BHG-VM Voltmeter
Product Specifications
- Voltmeter Range: 0 – 18 V DC
- Refresh Rate: 15, 25, 50, 75, 150 M/s
- Lowest Voltage Monitor: Yes
- Voltmeter Calibration: Yes
- Display: 1.3” OLED Monochrome
- Connectors: 3 Pin Plug connector
- Case Material: PETG Plastic
- Dimensions: Height: 1.15” – Width: 1.85” – Depth: 1.5”
Product Usage Instructions
Refresh Rate Adjustment:
To change the refresh rate, press the left button located behind the
voltmeter.
Voltmeter Calibration:
- Press and hold the right button located behind the voltmeter to enter calibration settings.
- Press the left button to decrease the value by 0.01V, and press the right button to increase the value by 0.01V.
- To exit the voltmeter calibration, please press and hold the right button.
Wiring Diagram:
- + Battery Positive (Connect to amplifier positive for more accurate voltage monitor)
- – Battery Ground (Connect to amplifier ground for more accurate voltage monitor)
- R – Remote (Head Unit)
Frequently Asked Questions (FAQ):
-
Q: How do I adjust the refresh rate of the voltmeter?
A: You can adjust the refresh rate by pressing the left button located behind the voltmeter. -
Q: How do I calibrate the voltmeter?
A: To calibrate the voltmeter, press and hold the right button to enter calibration settings. Use the buttons to adjust the value and then hold the right button to exit calibration mode. -
Q: What are the recommended connections for accurate voltage monitoring?
A: Connect the + Battery Positive and – Battery Ground to the amplifier for more precise voltage monitoring.
Specifications
- Voltmeter Range: 0 – 18 V DC
- Refresh Rate: 15, 25, 50, 75, 150 M/s
- Lowest Voltage Monitor: Yes
- Voltmeter Calibration: Yes
- Display: 1.3’’ OLED Monochrome
- Connectors: 3.81 mm 3 Pin Plug conector
- Case Material: PETG Plastic
- Dimensions: Height: 1.15’’ – Width: 1.85’’ – Depth: 1.5’’
Functions
REFRESH RATE –
- To change the refresh rate, press the left button located behind the voltmeter. VOLTMETER CALIBRATION –
- Press and hold the right button located behind the voltmeter to enter calibration settings.
- Press the left button to decrease the value by 0.01V, and press the right button to increase the value by 0.01V.
- To exit the voltmeter calibration, please press and hold the right button.
Wiring diagram
- + Battery Positive (Connect to amplifier positive for more accurate voltage monitor)
- – Battery Ground (Connect to amplifier ground for more accurate voltage monitor) R – Remote (Head Unit)
BASSHEADGARAGE.COM
@BASSHEADGarage