naspaluro B0CP23CQNB Armless Wide Desk Chair No Wheels Instruction Manual
- May 15, 2024
- naspaluro
Table of Contents
naspaluro B0CP23CQNB Armless Wide Desk Chair No Wheels
Product Information
The product is a multi-purpose chair with various components including Ax1, Bx1, Cx1, Dx1, Ex1, Fx1, Gx4, Hx4, Ix1, M620, and M625.
Specifications
- Ax1: 1 unit
- Bx1: 1 unit
- Cx1: 1 unit
- Dx1: 1 unit
- Ex1: 1 unit
- Fx1: 1 unit
- Gx4: 4 units
- Hx4: 4 units
- Ix1: 1 unit
- M6*20: 6 units
- M6*25: 6 units
Product Usage Instructions
Step 1: Pre-Assembly
Ensure you have all the components listed above. Remove the plastic cap
before assembly.
Step 2: Assembly
- Attach Gx4 to the designated area.
- Proceed to attach Hx4 to the appropriate location.
- Align the backrest with the seat and apply force to align the holes properly.
Step 3: Final Steps
Screw in the bolts to secure the components together.
FAQ
Q: What should I do if the holes don’t align during assembly?
A: Push the backrest towards the seat with a little more force to align the
holes before screwing in the bolts.
ASSEMBLY INSTRUCTIONS
EU Authorised Representative
Business Name: AMZ ECREP SL
Address: Calle Gran Via 49,7 Dch. Madrid 28013 Spain
GB Authorised Representative
River Source Distribution Limited
Address: Unit 39 St Olavs Court, City Business Center
Lower Road, London SE16 2XB United Kingdom
General Guidelines
- Please read the following instruction carefully and use the product accordingly.
- Please keep this manual and hand it over when you transfer the product.
- This summary may not include every detail of all variations and considered steps. Please contact us when further information and help are needed
Notes
- The product is intended for indoor use only. The product must be assembled and used in accordance with the provisions of the manual. Personal injury and/or damage to product may occur if products are used outside of their intended purposes and/or if products have been changed/modified from their original design. The seller does not assume any responsibility or liability with respect to any injury/damage caused by incorrect assembly or improper use
- Avoid long-term exposure to humid environments to prevent mildew.
- Keep the product away from fire sources and high temperatures. Do not expose the product to direct sunlight.
- Do not place any hot objects on the surface of the product.
- If there are any defective or missing parts after unpacking, please cease assembly immediately and contact us.
- Please assemble the item on a spacious surface and do not place the unwrapped product directly on the ground to avoid product damage.
- Please wear gloves during the assembly and/or disassembly process to avoid scratches from any sharp edges.
- Please match the corresponding part and fitting based on the part number in the manual.
- If the part does not match with the fitting, please check the piece as specified in this manual.
- During assembly, first loosely align all screws with the corresponding pre-drilled holes and then tighten the screws one by one.
- Periodically inspect screw tightness while the product is in use. If necessary, retighten to ensure structural integrity.
- It you accidentally spill water or another liquid on the surface, immediately wipe clean with a dry towel.
- Please keep the product away from sharp, pointed objects and corrosive substances to prevent product damage.
- Please place this item on level, solid ground during use.
Warnings
- Children are not allowed to assemble the product. During assembly, keep all small parts out of the reach of children as they may be fatal if swallowed or inhaled.
- Children are forbidden to climb or play on the product to avoid serious bodily injury caused by the toppling.
- Keep plastic packing bags out of reach of children to avoid any potential danger, such as suffocation.
- The total maximum static load capacity of the product is 110 kg (243 lb). Do not place overweight items on it.