Pumwoy TS-BC670 Bed Shaker Alarm Clock Instruction Manual
- May 15, 2024
- Pumwoy
Table of Contents
TS-BC 670 Bed Shaker Alarm Clock
Instruction Manual TS-BC670 English manual
TS-BC 670 Bed Shaker Alarm Clock
Product dimension diagram display:
Product full display diagram display:
Thank you for purchasing TS-BC670 Vibration Alarm Clock,please read the following instructions before using this product:
Main functions:
• Time (short press “SNZ” button to open the backlight, 10s without any
operation to close the backlight)
• 12/24 hour display format switching
• Two groups of alarms: alarm 1 default AM 6:00; alarm 2 default AM 7:00
• Snooze
• Vibration alarm: three levels of vibration strength can be adjusted
• Low battery alert
• Decorative doll light
• Child lock function
Power supply method:
3*A batteries power supply (When the battery power supply, the product can not
always light, short press the “SNZ” button to open the backlight).
Note: The productids shipped without batteries.
Time Setting:
In the time display mode, short press “SET” button to enter the setting mode,
the setting sequence is: hour setting – minute setting – exit.
When setting, short press “+” button, Increase 1 step, long press “+” button,
keep increase, short press “-” button, decrease 1 step, long press “-” button,
keep decrease..
Note: In the setting process, short press “SET” button to confirm the
setting and enter the next setting, long press “SET” button without response,
no operation in the setting process for 10 seconds, will automatically save
the setting and exit the setting mode.
Alarm clock setting:
In the time display mode, short press “ALL” button to enter the setting mode,
the setting sequencies’: AL1 hour setting → AL1 minute setting→ AL1 on/off →
AL2 hour setting → AL2 minute setting→ AL2 on/off →2exit.
When setting, short press “+” button,Increase 1 step, long press”+” button,
keep increase, short press”-” button, decrease 1step, long press “-“button,
keep decrease.
Set alarm clock on/off.’OFF’ represents the alarm clock is turned off,and ‘ON’
represents the alarm clock is turned on. The default settings ‘OFF, indicating
the alarm clock is off.
You need to press the ‘+’ or ‘-‘ key to to switch between on and off. When
alarm clock 1is activated, there will be an alarm clock icon displayed on the
left side in time mode. Similarly, when alarm clock 2 is activated, there will
be an alarm clock icon 2 displayed on the left side in time mode. Note: In the setting process, short press “AL” button to
confirm the setting and enter the next setting, long press “AL” button without
response, no operation in the setting process for 10 seconds, the clock will
automatically save the setting and exit the setting mode.
Alarm clock alarm and snooze:
Alarm mode: vibration alarm (three levels of vibration strength can be
adjusted),at the same time, the decorative doll light flash.
In the time display mode, first long press the “-” button to enter the
vibration strength adjustment mode, then short press the “-” button to select
the strength. The selection sequencies’ 01 (weak) → 02 (medium) → 03 (strong).
When the alarm clock vibrates, short press “SNZ” to enter snooze mode, Default
sleepy time 10 minutes. Short press other buttons except “SNZ” will stop the
alarm or snooze.
6.12/24 hour display format switching:
In the time display mode, short press the “+” button to switch between 12/24
hour format.
Decorative doll light:
Short press the “SNZ” button to turn on the doll light for 10 seconds.
Low battery alert function:
When the battery is low, the alarm clock will sound an alarm BIBI sound when it vibrates, while the screen low battery icon “ ” flashing, when the screen is closed, the alarm sound will be closed. At this time, please replace the new battery as soon as possible.
Child lock function:
In the time display mode, long press “SNZ” button for3 seconds to enter the child lock mode, the screen displays the LOC, in the child lock state, long press “SNZ” button for 3 seconds to release the child lock mode, the screen will flash once when released. In child lock mode, you can press “SNZ” button to check the time, other buttons are invalid. The display sequencies: 1 second “LOC” (prompting the clock is in child lock state), then display the time. In the child lock state, when the alarm clock vibrates, short press the “SNZ” button to enter the snooze mode, and the snooze time defaults to 10 minutes. Short press other buttons except “SNZ” button to stop the alarm or snooze.
MADE IN CHINA
Documents / Resources
|
Pumwoy TS-BC670 Bed Shaker Alarm
Clock
[pdf] Instruction Manual
TS-BC670 Bed Shaker Alarm Clock, TS-BC670, Bed Shaker Alarm Clock, Shaker
Alarm Clock, Alarm Clock
---|---