ShanWan Q36 Wireless Gamepad User Manual
- May 15, 2024
- ShanWan
Table of Contents
User Manual
Q36 Functional diagram
A D-pad Button
B X/Y/B/A Button
C Power/Home Button
D -/View button
E +/Menu Button
F Type-C Charging Port| G L/L2 Button
H R/R2 Button
I Reset Hole
J Toggle Switch
K LED
L Pair Button
---|---
Android/iOS/Windows
Bluetooth connection
- Flip the switch: Switch to X to enter the X-INPUT mode.
- Press the Pair button for pairing, and the LED blink quickly (only First use requires pairing).
- Turn on your device’s Bluetooth search and connect the Bluetooth device “XBOX Wireless Controller”.
- When connection succeeds, the LED is steady blue.
- After the connection has been successfully used again, you can directly.Press the to automatically connect back. Successfully connected LED bluesteady on.
- Press the Pair button again to power off the device.
HID for Android
Bluetooth connection
- Flip the switch: Switch to D to enter the HID for Android mode.
- Press the Pair button for pairing, and the LED blink quickly (only First use requires pairing).
- Turn on your Android device’s Bluetooth search and connect the Bluetooth device “Q36 for Android”.
- When connection succeeds, the LED is steady red.
- After the connection has been successfully used again, you can directly Press the to automatically connect back. Successfully connected LED red steady on.
- Press the Pair button again to power off the device.
ShootingPlus (V3/V3+)
Bluetooth connection
-
Flip the switch: Switch to V to enter the ShootingPlus Mode (The ShootingPlus App is available for download and installation in all mobile app markets).
-
Press the Pair button for pairing, and the LED blink quickly (only First use requires pairing).
-
Turn on your Android device’s Bluetooth search and connect the Bluetooth device “ShanWan Q36”.
-
When connection succeeds, the LED is steady green.
-
After the connection has been successfully used again, you can directly Press the to automatically connect back.
Successfully connected LED green steady on. -
Press the Pair button again to power off the device.
Controller charging/sleep/ wake-up function
When charging, the LED will blink slowly; When the battery is full, the LED
will keep bright.
Sleep / Wake-up function:
In pairing state: the controller will sleep if it’s not paired successfully
within 2 minutes.
Connect back state: The controller will sleep if it is not connect back within
1 minutes.
Bluetooth is connected state: The controller will sleep if the controller is
not used within 15 minutes.
Wake-up function ：
Press the to connect back when you need to wake-up it.
Electrical parameters
Working voltage: DC3.7V
Working current: 40mA
Working time: >10H
Sleep current: < 5uA
Charging voltaget/current: DC5V/500mA
Bluetooth transmission distance: < = 8M
Battery capacity: 180mAh
Standby time: 30 days( fully charged)
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>