Yueshun Y201 Smart Ear Wax User Manual
- March 13, 2024
- Yueshun
Table of Contents
Yueshun Y201 Smart Ear Wax User Manual
-
Open the APP to add the device “Smart Ear Wax Removal Kit”
-
Turn on the smart ear wax removal to complete the connection.
Press the button for 2 second, the indicator will flash and the lens light will light on.
- Connect the smartphone to the product’s WIFI
To avoid affecting the normal use of the earwax removal kit, please be sure to follow the steps below to set it up
Allow “Cooler” to use location?
Used to provide geographic location- based features or services
Allowed when using
Allowed for this use only
Reject
Cooler- XXXXX” cannot access the Internet, can the Wi-Fi Assistant be
allowed to switch to a better network?
Not allowed
Allow
Allow “Cooleer” to use location?
Used to provide geographic location- based features or services
Allowed when using
Allowed for this use only
Reject
“Cooler-XXXXX” cannot access the Internet, can the Wi-Fi Assistant be allowed to switch to a better network?
Not allowed
Allow
Functions of APP Buttons
- Lens light
- Zoom in and out
- Screen rotation
- Mirror the image
- Take photo
- Take video
- Album
- Screen lock
- Remaining Battery
Precautions
- The temperature of the product will rise slightly when used (the maximum will not exceed 40°C); it has no harm to the human body, please use it confidently.
- It is recommended to wipe the lens gently with an alcohol swab when cleaning.
- Please observe the surrounding area before use to ensure the environment is safe.
- Please do NOT use this product for children under 3 years old.
- Minors should NOT use this product alone to avoid accidental injury.
- Do NOT expose the product body to liquids to avoid water damage.
- The product has a built-in lithium battery, so please charge it once a month to maintain the battery life when long time no use.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
ISED Canada Statement:
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada ‘s license-exempt
RSS(s). Operation is subject to the following two
conditions:
- this device may not cause interference and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
RF Exposure Statement
To maintain compliance with IC’s RF Exposure guidelines, The installation
and operation of the device should meet the requirements for portable devices.
This device and its antenna(s) must not be co-located or operation in
conjunction with any other antenna or transmitter
Product Parameters
| Product Name | Smart Ear Wax Removal Kit |
|---|---|
| Model Number: | Y-201 |
| Web Standards | 802.11g/n protocol, 802.11b protocol |
| Antenna Type | internal antenna |
| Working Frequency, | 2.4Ghz |
| Image Transfer Rate: | 20-30fps |
| Image Sensor: | CMOS |
| Pixel | 3 megapixels |
| Battery Capacity: | 300 mAh |
| Working Time: | 90 min |
| Charging Time: | 60 min |
| Input Current | USB 5V 0.5A |
| Lens Diameter | 3.5 mm |
| Best Focal Length: | 15-20 mm |
| Depth of Field: | 10-50 mm |
| Gyri | 5 axis |
| Working Temperature | -10-45°C |
Common Problems and Solutions
| Problems | Solutions |
|---|---|
| The camera is blurry/unclear. | Wipe the lens gently with an alcohol swab. |
| No response when booting. | Try again after fully charging. |
| The App crashes. | Clean up the running APPs of the phone, and then Restart the |
APP
The camera light does not light on.| Try restarting the product.
The product flashes a red light.| Low battery: try again after fully charged.
After the product is successfully connected, the real-time image cannot be
displayed normally.| Disconnect the phone from the product’s WIFI, restart the
product, reopen the APP, and reconnect to the product’s WIFI.
The WIFI connection is unstable and disconnected after a few seconds.| Restart
the product and reconnect to the product’s WIFI.
Warm Tip: If the content above has not solved your problems, please
contact the seller through order.We will help you out in 24 hours.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>