SONGMICS LTB620 Motion Sensor Trash Can User Manual
- May 15, 2024
- Songmics
Table of Contents
**SONGMICS LTB620 Motion Sensor Trash Can User Manual
**
General Guidelines
- Please read the instruction carefully and use the product accordingly.
- Please keep this manual and hand it over when you transfer the product
- This summary may not include every detail of all variations and considered steps Please contact us when further information and help are needed
Notes and Warnings
- Use recommended sizes of plastic liners for sanitary purposes.
- Do not place lid in water. Lid contains electrical components.
- To avoid risk of suffocation, keep the trash bags away from children or kids. They are not toys.
- For easy storage, keep the original packaging.
- Do not use old batteries alongside new ones or batteries of different make.
- Remove batteries from battery box if product will not be in use for a long period of time.
- To avoid leakage or damage, remove empty batteries as soon as possible.
- Immediately remove batteries from the battery box if a leak is found.
- Keep batteries far from heat or fire to avoid risk of battery fluid leak or explosion. Battery fluid is corrosive.
Product Information
Product Dimensions | 30 x 30 x 742 cm (18″ x 118 x292′) |
---|---|
Volume | 50 Liters (132 Gallon) |
Batteries Requirements | 6 AA pieces |
Assembly Instructions
Garbage Bag installation
-
Remove Lid Cover.
-
Attach garbage bag to inner ring. Wrap bag around edge.
-
Tuck garbage bag into the bin and place retainer ring onto the bin. Place in the corrective position and secure.
Battery Installation
-
Remove battery cover.
-
Pull tab and remove the battery box.
-
Insert AA batteries (6’LR6). Make sure to insert based on battery contacts.
-
Make sure the battery box is inserted in the correct direction. aligning the metallic connectors together. Attach battery cover.
-
Place lid cover back onto the bin. Turn on the switch and it’s ready to use.
Note : The lid will automatically open if an object is within the range of 25-35 cm (98138 Inches) above the sensor.
Functions
Aqua Light – Starting-Up
After pressing the switch, the indicator light will flash 4 times to signify
that it is ready to be used.
Blue Light – Active Sensing Mode
Place your hand 15-25 cm (6-8 inches) away from the sensor for it to
automatically open. The indicator light will flash blue 6 times, then the lid
will close.
Green Light – Open Lid Mode
To keep the lid open for a longer period of time, hold your hand over the
sensor for 3 seconds while it’s open. The indicator light will then turn green
and the lid will remain open. To exit this mode, hold your hand close to the
sensor for 3 seconds. The indicator light will flash green 3 times to signify
this mode has ended.
Red Light – Sterilization Mode
Press down on the ozone generator button for 3 seconds to enter the
sterilization mode. The indicator light will flash red 5 times and the lid
will close. The sterilization process takes 20 minutes to complete, with the
light flashing red to indicate that it is in-progress. Do not open the lid
during this process, as the sterilization mode will end early. The flashing
red light will stop once the sterilization process is complete.
Upkeep and Cleaning
Regularly clean with mild detergents and let it completely dry to increase the
lifespan of this product.
Clean the indicator light with a dry cloth.
Do not use harsh or powerful solvent-based detergents. Avoid using steam
blasters, alkaline, or acidic detergents.
Disposal
Discarded electric appliances are recyclable. Do not discard in domestic
waste. Please return this appliance to electronic collection centers to
support protecting the environment by conserving resources
Take used batteries, nickel-metal hydride batteries, rechargeable batteries,
round cell or starter batteries to appropriate disposal or collection sites.
Do NOT place them in household waste.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>