SONGMICS LTB620 Dual Bin Rectangular Trash Can User Guide
- June 15, 2024
- Songmics
Table of Contents
SONGMICS LTB620 Dual Bin Rectangular Trash Can
General Guidelines
- Please read the instructions carefully and use the product accordingly.
- Please keep this manual and hand it over when you transfer the product
- his summary may not include every detail of all variations and considered steps. Please contact us when further information and help are needed.
Notes and Warnings
-
Use recommended sizes of plastic liners for sanitary purposes.
-
Do not place the lid in water. The lid contains electrical components.
To avoid the risk of suffocation. keep the trash bags away from children or kids. They are not toys. -
For easy storage. keep the original packaging.
-
Do not use old batteries alongside new ones or batteries of different make.
-
Remove batteries from the battery box if the product will not be in use for a long period of time.
-
To avoid leakage or damage, remove empty batteries as soon as possible.
-
Immediately remove batteries from the battery box if a leak is found. Keep batteries far from heat or fire to avoid risk of battery fluid leak or explosion. Battery fluid is corrosive.
Product Information
- Product Dimensions 30 x 30 x 742 cm 01.8″ x 11.8″ x29.2″)
- Volume 50 Liters ( 13.2 Gallon)
- Batteries Requirements 6AA pieces
Assembly Instructions
Garbage Bag installation
- Remove Lid Cover.
- Attach the garbage bag to the inner ring. Wrap the bag around the edge.
- Tuck the garbage bag into the bin and place the retainer ring onto the bin. Place in the corrective position and secure
Battery Installation
- Remove the battery cover.
- Pull the tab and remove the battery box.
- Insert AA batteries (6•LR6). Make sure to insert based on battery contacts.
- Make sure the battery box is inserted in the correct direction, aligning the metallic connectors together. Attach battery cover.
- Place the lid cover back onto the bin. Turn on the switch and it’s ready to use.
Note: The lid will automatically open if an object is within the range of 25-35 cm (9.8·13.8 Inches) above the sensor.
Functions
Aqua Light – Starting-Up After pressing the switch, the indicator light will flash 4 times to signify that it is ready to be used
Blue Light – Active Sensing Mode
Place your hand 15-25 cm (6·8 inches) away from the sensor for it to automatically open. The indicator light will flash blue 6 times. then the lid will close.
Green Light – Open Lid Mode
To keep the lid open for a longer period of time, hold your hand over the sensor for 3 seconds while it’s open. The indicator light will then turn green and the lid will remain open. To exit this mode, hold your hand close to the sensor for 3 seconds. The indicator light will flash green 3 times to signify this mode has ended.
Red Light – Sterilization Mode
Press down on the ozone generator button for 3 seconds to enter the
sterilization mode. The indicator light will flash red 5 times and the lid
will close. The sterilization process takes
20 minutes to complete, with the light flashing red to indicate that it is in
progress. Do not open the lid during this process. as the sterilization mode
will end early. The flashing red light will stop once the sterilization
process is complete. Upkeep and Cleaning
Regularly clean with mild detergents and let it completely dry to increase the lifespan of this product Clean the indicator light with a dry cloth. Do not use harsh or powerful solvent-based detergents. Avoid using steam blasters, or alkaline, or acidic detergents.
Disposal
Discarded electric appliances are recyclable. Do not discard domestic waste. Please return this appliance to electronic collection centers to support protecting the environment by conserving resources. Take used batteries. nickel-metal hydride batteries. rechargeable batteries, round cell or starter batteries to appropriate disposal or collection sites. Do NOT place them in household waste.