Snailfly 2011-2021 Roof Rack Cross Bars Fit Installation Guide
- May 15, 2024
- Snailfly
Table of Contents
Snailfly 2011-2021 Roof Rack Cross Bars Fit
Installation Instructions
- Step 1
- Take out the crossbars and distinguish from the positions by the marks of brackets.
- Please see the pictures below. Front-LH means front left hand.
- Step 2
- Put the crossbar on the car roof. Adjust the length of the crossbars to reach the roof rails.
- Step 3
- Loosen the screws of brackets to make the black slider slid out.
- Step 4
- Adjust the positions of crossbar to make the black slider seize up the factory roof rails.
- Step 5
- Move the crossbars to make them seat right. Then tighten the screws of brackets with allen key.
Completed!
Documents / Resources
|
Snailfly 2011-2021 Roof Rack Cross Bars
Fit
[pdf] Installation Guide
2011-2021 Roof Rack Cross Bars Fit, 2011-2021, Roof Rack Cross Bars Fit, Rack
Cross Bars Fit, Cross Bars Fit, Bars Fit, Fit
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>