AWLITZUT T29-40 Flap Disc User Manual
- May 15, 2024
- AWLITZUT
Table of Contents
Flap Disc
APPLICATIONS
Weld grinding, blending, deburring, rust removal, surface prep and edge grindingFlap Discs offer an unbeatable system for grinding and blending in one easy step.The construction wears away, exposing fresh mineral to extend disc life and provide consistent cut rates.
USAGE STEPS
- Press the spindle lock and remove the presser
- Put the presser in after loading the wheels
- Tighten the presser while keeping pressing the spindle lock
APPLICATION AND GRIT RECOMMENDATION
WARNING: Always use safety guards and eye protection during operation
Explanation of the labeling of abrasive products
- Always observe the instructions on the abrasive, the grinder and all accompanying user information.
- Use a grinder that is suitable for the respective application. A product that can not be clearly identified should never be used.
- Observe any use restrictions, warnings and safety instructions on the abrasive and on the accompanying labels or packaging:
| = Not permitted for hand-held grinding!
---|---
| = Not permitted for face grinding!
| = Not permitted for wet grinding!
| = Do not use if damaged!
| = Follow the safety instructions!
| = Wear eye protection!
| = Wear hearing protection!
| = Wear gloves!
| = Wear a dust mask!
| = Observe the minimum contact angle!
MANUFACTURER COMPANY
SHENZHENSHIKAIWENBEIKEJIYOUXIANGONGSI
MANUFACTURER ADDRESS
A3001, Block 5, Block 1-6, Runke Huafu, the intersection of Zhoushi Road and
Hezhou 4th Road, Hezhou Community, Hangcheng StreetShenzhen Guangdong Province
Bao’an District
Company:E-CrossStu GmbH
Address:60329 Mainzer Landstr.69
Email:[email protected]
YH Consulting Limited
C/O YH Consulting Limited Office 147,Centurion House , London Road , Staines-
upon-Thames, Surrey , TW18 4AX
[email protected]
+44 07514-677868