POUT-04101 Dual Mouse Pad and Fast Wireless Charging Pad User Guide

May 15, 2024
POUT

POUT-04101 Dual Mouse Pad and Fast Wireless Charging Pad

POUT-04101 Dual Mouse Pad and Fast Wireless Charging
Pad

PRODUCT DIAGRAM

POUT-04101 Dual Mouse Pad and Fast Wireless Charging
Pad

Model POUT-04101
Size 390 x 265 x 5 (mm)
Weight 460g
Material PC-ABS, PU, Magnet
Rated Power Input DC 5V 3A / 9V 3A
Rated Power Output 5W / 7.5W / 10W / 15W
Frequency 110-150 KHz
Operating Temperature 0°C ~ 35°C
Storage Temperature -20°C ~ 70°C

WHAT IS IN THE BOX?

What Is In The Box?

Dual Mouse Pad & Fast Wireless Charging Pad x 1 3

  • USB-C Type Fast Charging Cable x 1

  • User Guide

INSTRUCTION FOR USE

  1. Connect the included fast charging USB cable to the device.
  2. Connect the other side of fast charging USB cable to an available fast charge adapter. To ensuring fast c h arging, you should use a fast charge adapter (QC2.0 or QC3.0) instead of charging through your computer.
  3. Simply place your device on charging area of this fast wireless charger. Wireless charging will begin in seconds.
    Instruction For Use

Examples of Efficient Usage

Instruction For Use

WARNING / CAUTION / NOTICE

Do not use or store your device in areas with high concentrations of dust or airborne materials. Dust or foreign materials can cause your device to malfunction and may result in fire or electric shock. Prevent the multipurpose jack and the small end of the charger from contact with conductive materials, such as liquids, dust, metal powders, and pencil leads. Conductive materials may cause a short circuit or corrosion of the terminals, which may result in an explosion or fire. Keep your device dry. Humidity and liquids may damage the parts or electronic circuits in your device. Do not turn on your device if it is wet. Do not drop or cause an impact to the charger or the device. Handle and dispose of the device and charger with care. Never dispose of the device in a fire. Never place the device on or in heating devices, such as microwave ovens, stoves, or radiators. The device may explode when overheated. Follow all local regulations when disposing of used device. Never crush or puncture the device. Do not disassemble, modify, or repair your device. Any changes or modifications to your device can void your manufacturer’s warranty. If your device needs servicing, take your device to a Service Center. Do not use your device with the back cover removed. Doing so may result in damage or malfunction. Do not drop your device or cause impacts to your device. Your device may be damaged or may malfunction. If children use the device, make sure that they use the device properly. Do not use damaged power cords or plugs, or loose electrical sockets. Unsecured connections can cause electric shock or fire. Use manufacturer approved charging cable, accessories, and supplies. Using generic chargers may shorten the life of your device or cause the device to malfunction. They may also cause a fire or cause the battery to explode.If bent or deformed, your device may be damaged or parts may malfunction. Do not touch the device, power cords, plugs, or the electric socket with wet hands or other wet body parts. Doing so may cause electric shock. Do not pull the power cord excessively when disconnecting it. Doing so may cause electric shock or fire. Do not bend or damage the power cord. Doing so may cause electric shock or fire. Do not use your device outdoor during a thunderstorm. Doing so may result in electric shock or device malfunction. Turn off the device in potentially explosive environments. Turn off your device in potentially explosive environments instead of removing the battery. Always comply with regulations, instructions and signs in potentially explosive environments. Do not use your device at refueling points (petrol stations), near fuels or chemicals, or in blasting areas. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or accessories. There may be some events such as wireless charging begins after 4-5 seconds even though your device is positioned on a charging area properly. It is a normal situation that magnetic field is transferring between a charging pad and a mobile device. The device can be used in locations with an ambient temperature of 0°C to 35°C. You can store the device at an ambient temperature of -20°C to 70°C. Using or storing the device outside of the recommended temperature ranges may damage to the device or reduce the battery’s lifespan.

FCC INFORMATION TO USER

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

CAUTION

Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE:

FCC RF Radiation Exposure Statement:

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be colocated or operating in conjunction with any other antenna or transmitter.

WARRANTY

One Year Limited Warranty

NAME OF PRODUCT| Hands3 Pro Dual 2-in-1 Dual Device Wide Space Fast Wireless Charging Mouse Pad
---|---
MODEL| POUT-04101
MANUFACTURED| 2023.08
DATE OF PURCHASING|
PLACE OF PURCHASING|
YOUR NAME|

BROS & COMPANY INC. sells its products with the intent that they are free of defects in manufacture and workmanship for one year from the date of original purchase. BROS & COMPANY INC. warrants that its products will be free of defects in material and workmanship under normal use and service. Please fill in the blank of warranty table below. This warranty does not cover any damage caused by misuse or abuse, accident, alteration to the product, improper installation, unauthorized repairs or modifications, improper use of power supply, dropped product, environmental conditions, or any other conditions whatsoever that are beyond the control of BROS & COMPANY INC. This warranty does not extend to the purchase of opened, used, repaired, repackaged and/or resealed products, including but not limited to sales of such products on Internet sites and/or sales of such products by surplus or bulk resellers. Any and all warranties or guarantees shall immediately cease and terminate as to any products or parts three which are repaired, modified, or altered without any permission of BROS & COMPANY INC.

1 Year Warranty – For Sales in Australia: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is provided by BROS & COMPANY INC., 1010, Vision IT tower, 677-5, Dongtan-daero, Hwaseong-si, Gyeonggi-do, South Korea, Phone: (+82 70 7707 7607). If you believe this product is faulty, return it to your place of purchase along with receipt for a replacement or refund as determined to me most appropriate for your particular case.

Copyright Copyright © 2021 BROS & COMPANY INC. This manual is protected under copyright laws. No part of this manual may be reproduced, distributed, translated, or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or storing in any information storage and retrieval system, without the prior written permission of BROS  & COMPANY INC.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals