INTERMATIC FM1D20 Series 24 Hour or 7 Day 120V Electronic Panel Mount Module Instruction Manual
- June 4, 2024
- Intermatic
Table of Contents
FM1D20 Series 24-Hour or 7-Day 120V Electronic Panel Mount Module
Instruction Manual
Safety precautions
Safety precautions
- The connection and installation of electrical devices may only be carried out by a qualified electrician.
- Interventions in and changes to the device result in the voiding of the warranty claim.
- Observe your national regulations and the respective safety provisions.
- Switch-off commands have priority over switch-on commands.
Program structure
Symbols, keys
| : Overview of daily switching program
: Setting of 24h or am/pm
: Summer/winter clock changes
: Weekday display
: Switching status display ON/OFF
---|---
+/-| : Adjustment keys: By pressing the key longer than 2 sec. you can adjust
the timer in steps of 5 units
---|---
Res.| : Reset
Menu| : By pressing the menu key programming is terminated and the system
reverts to automatic operation
OK| : Confirmation of programming
Setting the timer
The setting of this programmable timer is depending of the user’s preference
to use pre-set programs or defining own programming.
Using Pre-set programs (first-time installation)
Using the Reset key you can adjust the following values:
24h or am/pm:
Time (hour and minutes):
Weekday:
Pre-set programs P01 to P03:
User-defined programming by Menu mode
Using the Menu key you can adjust/review the following values:
24h or am/pm:
Time (hour and minutes):
Weekday:
Programs P–:
Setting 24h or am/pm clock, time and weekday
Sequence to follow after selecting programming by pre-set programs or Menu
mode.
Pre-set programs
Programs P01-03
The switching on and off times for programs P01 to P03 are preset (pre).
The user can change these programs.
The individual program, P-Under the menu option P– you have the option of
creating a user-defined program.
This program can be changed at any time. There are up to 20 memory locations
available for 10 OFF and 10 ON commands.
You can allocate a corresponding weekday or week block to each memory
location.
Selecting pre-set programs P01 to P03
Sequence to follow after setting time in the Reset mode.
Once selected the program is desired there are the following options:
Menu: terminate programming
OK: Going through pre-set programs to modify selection (any program
ON or OFF can be modified by using ”+” or ”-” keys and confirming with OK ) or
accepting it with the OK key to go to the next free memory location in order
to add new user-defined pro- grams (see pg 30).
e.g. after selecting P02 you should also program: Sa-Su 22:30 ON (prog05)
23:00 OFF (prog06)
User-defined programs
Sequence to follow after setting time and weekday while running Menu mode or adding programs to the pre-set P01 to P03.
Shift
Should the OFF command be the following day of the ON command then select the
”+” key then select Menu or OK.
Example:
Mo-Fr
20:00 p.m. – 03:00 a.m. ON
03:00 a.m. – 20:00 p.m. OFF| Mo-Fr
20:00 p.m. – 03:00 a.m. ON
Tu-Sa
03:00 a.m. – 20:00 p.m. OFF
---|---
Deleting programs
Select Menu, then select the OK key until getting to the ON time of the program you want to delete.
Note:
Switching programs are deleted in ON-OFF pairs. If you delete a single ON
instruction, the corresponding OFF instruction is also deleted.
Daylight Savings time
The +1h key is for the change to daylight savings time.
- By pressing the +1h key 1 hour is added to the current time.
- +1h is shown on the display.
- By pressing +1h again 1 hour is subtracted from the current time.
Automatic
WARRANTY
Warranty service is available by either (a) returning the product to the dealer from whom the unit was purchased or (b) completing a warranty claim online at www.intermatic.com. This warranty is made by: Intermatic Incorporated, 1950 Innovation Way, Suite 300, Libertyville, IL 60048. For additional product or warranty information go to: http://www.Intermatic.com or call 815-675-7000.
INTERMATIC INCORPORATED
Libertyville, IL 60048
158–02264
Documents / Resources
|
INTERMATIC FM1D20 Series 24 Hour or 7 Day 120V Electronic Panel Mount
Module
[pdf] Instruction Manual
FM1D20 Series, 24 Hour or 7 Day 120V Electronic Panel Mount Module, FM1D20
Series 24 Hour or 7 Day 120V Electronic Panel Mount Module, 120V Electronic
Panel Mount Module, Electronic Panel Mount Module, Panel Mount Module, Mount
Module, Module
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>