JLLFITNESS RE200 Exercise Bike Instruction Manual

: May 15, 2024
: jllfitness

JLLFITNESS RE200 Exercise Bike

JLLFITNESS-RE200-Exercise-Bike-PRDOUCT

Specifications

Product: Exercise Bike
Model: [Insert Model Number]
Brand: [Insert Brand Name]
Features: Heart-rate sensors, Monitor display, Easy assembly
Support: Scan QR code for video assembly guide and technical support

Product Usage Instructions

Safety Instructions
Please pay attention to the following instructions before operating the exercise bike.

Important Safety Information
Before assembling and using the equipment, read the entire manual to ensure safe and effective use. Consult a health professional if you have any medical conditions.

User Safety Precautions

Consult a health professional before starting an exercise program.
Inform all users of the equipment about warnings and precautions.
If on medication affecting heart rate, blood pressure, or cholesterol, seek medical advice.

Assembly

Preparing the Site: Choose a flat, stable surface with ample space for assembly.
Diagram: Refer to the exploded diagram in the manual for part identification.
Content Listing: Check all parts against the parts list before assembly.

Operation

Heart-rate Sensors: Use the built-in sensors to monitor your heart rate during exercise.
Functions: Familiarize yourself with the monitor functions for tracking your workout progress.
Monitor Instructions: Follow the manual for guidance on using the monitor effectively.

Maintenance

Preventive Maintenance Activities: Regularly inspect and maintain the bike to ensure optimal performance.
Bike Cleaning: Use a damp cloth to clean the bike surfaces after each use. Avoid harsh chemicals.
Bike Balance: Check and adjust the bike’s balance if needed for a smooth workout experience.

Additional Information

Contact Information: Refer to the manual for customer support contact details.
Disclaimer: Read the disclaimer section for important information regarding product usage.

EXPLODED DIAGRAM

JLLFITNESS-RE200-Exercise-Bike-FIG-1

PARTS LIST

JLLFITNESS-RE200-Exercise-Bike-FIG-2

SAFETY INSTRUCTIONS

Please pay attention to the following instructions before operating this bike.

IMPORTANT SAFETY INFORMATION
Thank you for choosing our product. To ensure your health and safety, please use this equipment as advised. It is important to read this entire manual before assembling and using the equipment. Safe and effective use can only be achieved if the equipment is assembled, maintained, and used in accordance with the manual. It is your responsibility to ensure that all users of the equipment are informed of all warnings and precautions.

Before starting any exercise program, you should consult a health professional to determine if you have any medical or physical conditions that could put your health and safety at risk or prevent you from using the equipment properly. A health professional’s advice is essential if you are taking medication that affects your heart rate, blood pressure, or cholesterol level.
Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop exercising if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, light-headedness, dizziness, or feelings of nausea. If you do experience any of these conditions, you should consult a health professional before continuing with your exercise program.
Keep children and pets away from the equipment. The equipment is designed for adult use only.
Use the equipment on a solid, flat-level surface with a protective cover for your floor or carpet. To ensure safety, the equipment should have at least 2 feet (61 cm) of free space all around it.
Ensure that all nuts and bolts are securely tightened before using the equipment. The safety of the equipment can only be maintained if it is regularly examined for damage and/or wear and tear.
Always use the equipment as indicated. If you find any defective components while assembling or checking the equipment, or if you hear any unusual noises coming from the equipment during exercise, discontinue the use of the equipment immediately. Please contact JLL Fitness on 0800 6123 988 for advice on how to resolve the issue.
Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may become entangled in the equipment.
Do not place fingers or objects into the moving parts of the equipment.
To avoid bodily injury and/or damage to the product or property, ensure to follow safe procedures for lifting and moving the item.
Your product is intended for use in cool, dry conditions. You should avoid storage in extremely cold, hot, or damp areas as this may lead to corrosion and other related problems.

USER SAFETY PRECAUTIONS

PRIOR TO USE

Assemble the bike according to the instruction manual.
Consult your doctor before beginning any exercise program.
Read instructions.
Read warning labels.
Read emergency stop procedures.
Maximum user weight is 100kg/ 15 St.
Inspect unit. If damaged, DO NOT USE.
Ensure every bolt and screw is securely tightened.

DURING USE

DO NOT use for stretching and DO NOT attach straps or other devices.
DO NOT allow children aged 12 or younger to be on or near the machine.
Stop exercising if you feel faint, dizzy, or encounter pain.
Keep all clothing and accessories clear of moving parts.

EXERCISE SAFETY PRECAUTIONS

Use sports clothes and gym shoes.
DO NOT use with bare feet.
This model has been designed for domestic purposes only.

FACILITY SAFETY PRECAUTIONS

DO NOT operate in damp locations.
Use caution when getting on or off the bike.
Check the bike for worn or loose components before each use. DO NOT use until worn or damaged parts are replaced.
Maintain regularly. Refer to the Preventive Maintenance chapter.
DO NOT use the bike if: (1) the bike is not working adequately or (2) the bike has been dropped or damaged.
DO NOT use the bike outdoors.
Read the instruction manual completely before using the bike.
Ensure all users wear appropriate footwear on JLL® equipment.
As far as possible provide the following clearances: 0.5 m at each side and 2 m at the back. Be sure your bike is clear of walls, equipment, and other hard surfaces.
DO NOT modify the bike in any way. Any modifications will void the warranty.
All the data displayed by the monitor is for reference purposes only.

WARNING STICKERS
Warning stickers indicate a potentially hazardous situation that, if not avoided, could result in death or serious injury. Carefully read the following caution and warning labels before using the unit.

WARNING: It is strictly forbidden to touch any moving parts of the bike.
WARNING: Keep small children and pets a safe distance from bikes when in use.

ASSEMBLY

PREPARING SITE

To find the ideal location to set up this bike, ensure that:

The area is well-illuminated and well-ventilated.
The surface is level.
There is enough space to access the unit and emergency dismount. If it is possible, keep the following clearances: 0.5 m at each side and 2 m at the back.
The bike is placed in an environment with a relative humidity range of 30-50%. Please ensure the temperature is kept constant. Do not use in a moist or damp environment as this may impact on the integrity and performance of the machine.

DIAGRAM

JLLFITNESS-RE200-Exercise-Bike-FIG-3

CONTENT LISTING
See diagram (left) and content listing (below) for recumbent bike box contents. See Customer Service chapter for contact information if any parts are missing.

BOX CONTENTS

JLLFITNESS-RE200-Exercise-Bike-FIG-4

TOOLS PACK

ASSEMBLY

The bike has been assembled and tested at the factory, so you shouldn’t have any problems putting all the parts together. Components are designed to fit together, and only basic tools are required for the assembly process. Inside the box you will find a Tools Pack (Hex Allen Key, Multi-Tool, Washers, and Bolts). See the previous page.

To assemble your JLL RE200 please follow these easy steps:

Attach the front (8) and rear (6) stabilizers to the base using two carriage bolts (9) per stabilizer along with two flat washers (10) and acorn nuts (11).
Fix the adjustable tube (13) to the rear main frame using six inner hex screws (21) and six flat washers (10). Then attach the seat (25) and backrest (24) to the frame using four inner hex screws (21) and flat washers (10) for each.
Connect the handlebar (4) to the bracket under the seat and secure using two carriage bolts (16), flat washers (10), and acorn nuts (11). Then join the pulse wires from the handlebar to the base.
Attach the right and left pedals (7L/R) to the corresponding cranks, each will be labeled right and left. ATTENTION: Turn the right pedal clockwise and the left anti-clockwise. Failure to do so correctly may result in permanent damage to your bike.
Next, attach the handlebar post to the base by first connecting the sensor wires (40+34+39) to the corresponding wires from the base. Then connect the tension cable as shown in the diagram on the right. Please Note: this will take some force and make sure the resistance dial is already turned down to number 1. Lock in place using six inner hex screws (21), arc washers (17), and flat washers (10).
Next, secure the right and left handlebars (42R/L) to the handlebar post using two inner hex screws (21) and flat washers (10) per side. Then connect the wires from the monitor to the frame and secure the monitor (28) to the bracket using the four screws (30) found in the back.

MONITOR CONFIGURATION

JLLFITNESS-RE200-Exercise-Bike-FIG-9

TESTING THE BIKE OPERATION
Use the following instructions to test the full resistance of the bike and to check the machine for proper operation.

Sit on the bike and start pedaling, change the levels of resistance, and check to make sure you feel a difference in difficulty.
As you are pedaling make sure you don’t feel any wobble in your machine.
As you pedal on your bike check that there are no unusual noises.
Finally, check the monitor to make sure the digits are changing on each set to record your workout correctly.

SPECIFICATIONS

JLLFITNESS-RE200-Exercise-Bike-FIG-10

OPERATION

Read all instructions, warnings and safety procedures located in the Safety chapter before using the bike.

HEART-RATE SENSORS
Hold the sensor plates on the handlebars ensuring that your hands are clean. A heart- rate reading will show on the display. Factors that interfere with pulse signal are:

Hand lotions, oils or body powder.
Excessive dirt.
Excessive movement.

NOTE: Heart rate is calculated by PPM (Pulsations per minute).

FUNCTIONS

DISTANCE: The distance covered in kilometres during your workout.
TIME: Counts the duration of your workout.
SPEED: Calculates your current speed while exercising.
PULSE: Calculates your current heart rate while exercising.
CALORIE: Counts the estimated calories burnt while exercising.
ODOMETER: The distance covered in kilometres since the machine has first been used. SCAN: Scans through each function repeatedly.

MONITOR INSTRUCTIONS

SCAN MODE
When you first power on the monitor it will be set in a scan mode, displaying all your data every few seconds. There will be a scan graphic in the top left corner to indicate this, to exit scan mode press the mode button.

MAIN DISPLAY
Out of scan mode, continually press the mode button to change what function is displayed. Along the bottom of the screen, there will be text indicating what function is showing.

TARGET PROGRAMS
With the RE200 monitor, you can set a target time, distance, calories, and pulse. Press the mode button until the function you want to set is showing, then press the set button continually to increase the digits. Once you’ve set your target, you can either set another by pressing the mode button to move to the next setting or start pedaling to begin your workout.

RESETTING YOUR MONITOR
To reset the digits on your monitor press and hold the reset button, this will return everything to zero.

MAINTENANCE

Maintenance must be performed regularly. Performing maintenance actions can aid in providing safe and trouble-free operation of all JLL® equipment.
JLL® are not responsible for performing regular inspection and maintenance actions for your machine. JLL® representatives are available to answer any questions that you may have on +44 (0)800 6123 988.

PREVENTIVE MAINTENANCE ACTIVITIES

Every JLL® bike that comes from the factory is already maintained, however, you just need to follow simple steps to keep it in fully working condition. Keeping the bike in a clean state will help to prolong its life. Perform regular preventive maintenance to ensure normal operation of the unit. Keep a log of all maintenance actions to assist in staying current with all preventive maintenance activities. JLL® is not responsible for performing regular inspection or maintenance.
Read all instructions and warnings listed both in this chapter and in the Safety chapter. During maintenance, disconnect the power cable. Contact JLL® Customer Service on +44 (0)800 6123 988 for any maintenance or service concerns.

Requirements

Water
Dry cloth
Vacuum

WARNING

Only use water to clean and dust. Do not use any cleaning product because they may damage the bike.
Be careful not to spill or get excessive moisture between the edge of the monitor, as this might create an electrical hazard or cause failure of the electronics.
Use only JLL® replacement parts.
If you allow your machine to become rusty, this will affect your warranty.

Depending on where the bike is placed, you may experience dry air, causing a common experience of static electricity. You can notice that by walking across a carpet and then touching a metal object. On your bike you may experience a shock due to the build-up of static electricity on your body and the discharge path of the bike.
If you experience this type of situation, you may want to increase the humidity to a comfortable level through the use of a humidifier.

Check your machine regularly for rust. If rust starts to appear on the screws it means the item is not housed in the correct environment and will need to be moved to a more suitable room. Any rust will indicate there may be moisture in the air and as a result this could impact on the integrity and performance of your machine.

EXERCISE BIKE CLEANING

After every workout use a neat, dry cloth for cleaning the bike and the handlebars to prevent the machine of corrosion. Wipe away any sweat that may have dripped onto the monitor or handlebars. Avoid scratching the display by using a soft cloth.

Contaminants, such as hand lotions, oils or body powder, may come off on the sensor plates. These can reduce sensitivity and interfere with the pulse signal. It is recommended that the user has clean hands when making contact with the
sensor plates. Clean the handles using a cloth dampened with water. Do not use abrasive or chemical cleaning agents.

Vacuum or sweep the floor underneath and around the bike to prevent any dust
going into the machine. A treadmill mat can help to reduce dust.

EXERCISE BIKE BALANCE
Place the bike on a level floor to avoid it being off-balance.

Check if the bike is balanced:

Without being on the bike, place your hands on the handlebars.
Gently try to rock the machine from side to side.
If you feel any vibrations, adjust the plastic caps on the rear stabilizer.

WARNING: EQUIPMENT HAZARD

To avoid serious injury or death:
Replace worn or damaged components immediately and do not use them until the repair is completed.

ADDITIONAL INFORMATION

CONTACT INFORMATION
In case any issues arise, please do not hesitate to contact our Customer Service team on
+44 (0)800 6123 988 or email us at INFO@JLLFITNESS.CO.UK

You can also visit our support center at SUPPORT.JLLFITNESS.CO.UK for maintenance and assembly articles & videos.

DISCLAIMER

You should consult your physician, doctor or other health care professional before starting or taking part in any of our workout guides. It is your responsibility to evaluate your own health before taking part or performing any physical activity you may see associated with JLL Fitness Ltd.
Always seek professional advice before changing your diet or starting any exercise program.
JLL Fitness Ltd is not liable for any injuries or damages that may occur when assembling or using this exercise bike.
By reading this you assume full responsibility for any injuries or changes to your physical well-being. You waive all rights and release JLL Fitness Ltd of blame from any injuries or damages to property that may occur whilst following our advice.
This manual offers specific instructions on how to assemble and maintain your exercise bike. Failure to follow these directions may result in your warranty being void.

QR SCAN

FAQ

Frequently Asked Questions

Q: How do I access the video assembly guide?
- A: Scan the QR code provided in the manual to watch the step-by-step video guide for assembling the exercise bike.
Q: How often should I clean the exercise bike?
- A: It is recommended to clean the bike surfaces with a damp cloth after each use to maintain hygiene and prolong the equipment’s life.

WWW.JLLFITNESS.COM

Follow us on Facebook and Twitter @JLLFitness
© JLL Fitness Ltd . All Rights Reserved.