pamobabe RS003DA Luxury Electric Baby Swing Instruction Manual

pamobabe RS003DA Luxury Electric Baby Swing

Product Information

Specifications:

• Model: KDD-RS003DA
• Type: Luxury Electric Baby Swing
• Components: Base, Tubes, Seat Fabric, Net, Mattress, Charging Cable, Remote Control, Toys Bar
• Features: Swing Gear, Power Swing Timer, Volume Control, Music Playback, Canopy, Five-Point Harness

Product Usage Instructions

Installation Procedure:

1. Base Installation
2. Fabric Installation
3. Mattress Installation
4. Fabric and Base Installation
5. Backrest Adjustment
   • Loosen the harness for adjustment
   • Adjust the backrest angle as needed
   • Tighten the harness securely
6. Canopy Installation
7. Swing Lock and Unlock Procedure

Electronic Part Description

1. Power Button : Controls the power on/off and display functions
2. Timer Button : Selects timer settings for 8, 15, or 30 minutes
3. Swing Button : Selects swing gear from 5 options
4. Music Button : Plays and controls music playback, including 11 built-in songs

Remote Control Operation:

• Power, Music Play/Pause, Last Track, Next Track buttons
• Timer selection and volume control buttons
• Swing gear adjustment using numbers 1-5

Maintenance & Cleaning:
Regularly check the security of the electric rocking chair. Clean with a soft, dry cloth or sponge. Avoid using alkaline or acidic water to wash the bassinet to prevent corrosion. Do not expose the bassinet to wet, cold, or high-temperature environments for extended periods. Use a brush to clean fabric stains.

FAQ (Frequently Asked Questions)

• How do I power on the swing?
  Press the Power Button to turn on the swing. Make sure to remove the insulating plastic sheet from the battery before powering on.

• How do I adjust the swing timer?
  Use the Timer Button to select a time duration (8, 15, or 30 minutes) for automatic swinging.

• Can I play music on the swing?
  Yes, you can use the Music Button to play 11 built-in songs or connect via Bluetooth for personalized music playback.

Cradle Swing

WARNING
FALL HAZARD: Infants have suffered head injuries falling from swings.

•  STOP using product when infant begins to push up on hands and knees (approximately 5 months)
• ALWAYS provide the supervision necessary for the continued safety of your child. When used for swinging, never leave child unattended. SUFFOCATION HAZARD: Infants have suffocated:
  • on pillows, comforters and extra padding
  •  in gaps between a wrong-size mattress, or extra padding and product sides
• NEVER add soft bedding or padding.
• Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• Use ONLY mattress provided by manufacturer.This device complies with Part 15 of the FCC Rules.
• Operation is subject to the following two conditions:
  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.
     CAN ICES-3(B)/NMB-3 (B)

Toys Bar

WARNING
Possible entanglement injury. Keep out of baby’s reach.
Remove mobile from from crib or playpen when baby begins to push up on hands and knees.

• A crib mobile is intended for visual stimulation and is not intended to be grasped by the child.
• If attached to the crib or playpen, remove when baby begins to push up on hands and knees. If so designed, mount on wall or ceiling clearly out of a standing baby’s reach.
• If mounted on a wall or ceiling, install the mobile clearly out of a standing baby’s reach.
• Always attach all provided fasteners (strings, straps,clamps, etc.) tightly to a crib or playpen according to the instructions. Check frequently.
• Do not add additional strings or straps to attach to a crib or playpen.

COMPONENTS AND PARTS

INSTALLATION PROCEDURE

BASE INSTALLATION

FABRIC INSTALLATION

MATTRESS INSTALLATION

FABRIC AND BASE INSTALLATION

BACKREST ADJUSTMENT

FIVE-POINT HARNESS

CANOPY INSTALLATION

SWING LOCK

SWING UNLOCK

REMOVE BASE

WARNING
Remove the protective film on the screen before use to avoid choking hazards.

ELECTRONIC PART DESCRIPTION

POWER BUTTON

1. POWER BUTTON
   Power on key LED long bright, short press the power switch, the power gear display and timing display flow after a circle of light will display -(three bars), then shortpress the power switch, you can turn off all functions in the work, the power key light is long on, and the other lights are all off.
   (three bars)display.

2. TIMER BUTTON
   Touch the “Timer Button” to select a time, the selected timer indicator light up. The 3 timing stalls: 8 minutes, 15 minutes, 30 minutes. Stop timing with 4th touch , all timing indicators turn off. Circulable operation.

3. SWING BUTTON

   • Touch “Swing Button” to select a swing gear, the selected swing gear indicator light up. There are 5 swing gears. Stop with the 6th touch and all swing gear indicators turn off.
   • The indicator is -(one bar) At this time, the gear key light is off and then short press to start the swing selection after turning off the swing.
   • One gear and the corresponding LED light, the digital displayscreen shows the corresponding gear number.
   • This cycle can be operated.

4. MUSIC BUTTON
   Touch the “Music Button” to play music, touch again to pause the music, then touch again to play next music (11 songs built in). If entering the Bluetooth mode, prioritize the Bluetooth music on the phone to play, Bluetooth are connected, there will be a drop thud prompt sound.

5. VOLUME and MUSIC
   Touch the “Volume Button” to turn the volume up or down. There are five gears for sound increase and decrease). Circulable operation.
   Note: Just open the mobile phone Bluetooth function to search COOLBABY RS003 name pairing to use Bluetooth to play music on your phone. Power supply mode: Two models

6. The product is equipped with a USB-DC power cord, which can be connected to a mobile phone charging power source;

7. The product is equipped with a USB-DC power cord, which can be connected to a portable portable power source.

REMOTE CONTROL OPERATION

KEY INSTRUCTION

1. Power Button
   Press the power button to turn on/off

2. Timer Button

   • Press the timer button to select a set time.
   • Press the timer button to set the display time.
   • Press this button continuously to switch the timier lamp gear.
   1. Device timing indicator 1: 8 minutes
   2. Device timing indicator 2: 15 minutes
   3. Device timing indicator 3: 30 minutes

3. Music Key
   Press the music key to play music.

4. VOL+ Volume Increase Key
   Press the VOL+ key to increase the volume.

5. VOL- Volume Reduction Key
   Press the VOL- key to reduce the volume.

6. Music Pause Key
   Press the pause key to play and pause music.

7. Previous Key
   Press the previous song key to play the previous song.

8. Next Key
   Press the next key to play the next music.

9. Swing Key

   • Press the key once to select Swing 1 (device display 1)
   • Press the key twice to select Swing 2 (Device display 2)
   • Press the key 3 times to select Swing 3 (device display 3)
   • Press the key 4 times to select Swing 4 (device display 4)
   • Press the key 5 times to select Swing 5 (device display 5)

10. The Stop Key
    Press the stop key to stop the swing.

11. Remote Control Battery Packing Method

BATTERY INSTALLATION
Button Battery CR2025 3V (INCLUDE) (You need to remove the insulating plastic sheet before you can power on)

MAINTENANCE & CLEANING

• Please make a routine check to make sure that electric rocking chair is secure.
• Please use the soft and dry cloth or sponge to clean the electric rocking chair. Do not use alkaline or acidic water to wash the bassinet to avoid the water corrode the iron pipes or hardware.
• Do not use or keep the bassinet in a wet, cold or high temperature environment for extended periods of time. Please use a brush or other clean tools to clean any splotches on the fabric.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>