Funmit 385311641 RV Toilet Water Valve Kit Replacement Instruction Manual
- May 15, 2024
- Funmit
Table of Contents
Funmit 385311641 RV Toilet Water Valve Kit Replacement Instruction Manual
Allows easy replacement of worn or damaged water valves. In cold climates, be
sure to follow winterizing procedure in owner’s manual to help avoid water
valve failure. Refer to replacement instructions in new water valve kit prior
to removal or installation of water valve assembly.
IMPORTANT: An indicator of improper winterization is freeze damage to the
water valve which results in leaks.
If trapped water
freezes in piping that supplies water to the toilet, it expands and creates
extremely high. pressure that can damage the valve (see the photo) If freeze-
damage occurs as a result of improper. winterization, replace the water valve
with a 310 rv toilet water valve kit, part number 385311641.
A
Freeze Damage Indicator Window: white stress marks indicate freeze damage.
B Water valve damage due to severe exposure to below-freezing temperature.
Replace The Water Valve Kit
- Turn off the water supply.
- Disconnect the water supply line from the water valve.
- Press the flush pedal to drain water from the toilet bowl.
- Disconnect water line to vacuum breaker.
- Press top and possibly bottom latches at the same time to release, then pull water valve out of housing.
- Push new water valve into place until latches Engage.
- Connect water line to vacuum breaker, with the supplied clamp.
- Connect water supply line to water valve.
- Turn on Water Supply to Toilet. 10.Flush several times to check for leaks.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>