Nuie NCG341 Rimless White Toilet Pan and Soft Close Seat Instruction Manual

Nuie NCG341 Rimless White Toilet Pan and Soft Close Seat

Wall Hung Toilet Fixing Sets

• For fixing of wall hung toilet
• matched with in-wall tank.

Component/Specification

Contents

Diagrams

Diagrams depicting various components such as nuts, plastic nuts, washers, brackets, hexagon socket set screws, plastic pipes, and a hex wrench are displayed, illustrating the assembly and installation process.

Installation Notes

• Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation sequences. Follow the sections that pertain to your particular installation to avoid costly mistakes. In addition to proper installation, read all operating and safety instructions.
• Observe all local plumbing and building codes
• shut off the water supply before beginning.

Tools and Materials Required

• Adjustable Wrench
• Metal File (File Cut)
• Tape Measure
• Tubing Cutter
• Level
• Hacksaw
• Putty Knife
• Screwdriver
• Connection Packing
• Straight Pipe Coupling

Installation

1. Install the Tank

1. Turn the water supply off before installing the new toilet.
2. Install the concealed tank system in the wall before decorating the wall.
3. Install the tank system per tank’s installation instructions.

2. Set the Spacing of the Bowl

After you install the tank, be careful to set the spacing of set aside the length for carrier studs and tighten the nut. The bowl on the wall according to the dimensions as shown.

3. Attach Connection Pipe

1. Attach the inlet pipe which set aside the length to the concealed tank.
2. Attach the outlet pipe to the toilet.
3. You may apply some lubricant to help connect smoothly.

4. Install the New Toilet

1. Install the accessory kit into the installing hole.
2. Place the new toilet on the wall through the carrier.
3. Use a wrench to tighten accessories and level the toilet, then finish fixation.
4. Apply sealant to make sure the bowl’s edge seals to the wall.

5. Install Seat with Hardware Provided

Follow the provided instructions for installing the toilet seat with the included hardware.

FAQ

• What should I do before installing the new toilet?
  • Ensure the water supply is turned off and the concealed tank is installed in the wall before decorating.
• How do I correctly set the spacing of the bowl?
  • Carefully measure and set aside the length for carrier studs and tighten the nut according to the provided dimensions.
• Can I use any lubricant when attaching the pipes?
  • Yes, you may apply some lubricant to help connect the inlet and outlet pipes smoothly.
• What is the last step after installing the new toilet?
  • After levelling and fixing the toilet, apply sealant to ensure the bowl’s edge seals properly to the wall.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>