Dog Bark TC-012 Collar with Ultrasonic Vibration Shock User Manual

**Dog Bark TC-012 Collar with Ultrasonic Vibration Shock User Manual

**

important Safety information

Not suitable for aggressive dogs

Suitable for dogs over 6 months.

Dogs should not wear it for more than 12 hours a day.

The hair around the dog’s neck can be cut appropriately.

Do not touch contacts during E-shock.

Keep product out of reach of children

Make sure dog is healthy before use.

Remove the device before playing with the dog to avoid false triggers.

Examine the skin health of the shock zone on the dog’s neck

Packaging and Accessories

1. Bark Training Collar 1Pcs
2. User Manual 1Pcs
3. Long and Short E-Shock Probes 2Set
4. Probe Protective Cover 2Set
5. Magnetic Charging Cable 1Pcs
6. Test Unit 1Pcs

Product Composition

1. 1.Buckle
2. Test Unit
3. Color Display
4. Slider Buckle
5. Rivet
6. Braided Belt
7. Setting/Adjustment Button
8. Sound Sensor
9. E-Shock Probe
10. Power ON&OFF
11. Ultrasonic Transmitter
12. Magnetic charging Contacts

Power Display
Online Reminder light
Pause Sign
Sensitivity/E-Shock Vibration/Ultrasonic level
Vibration Symbol
Sensitivity Symbol
E-Shock Symbol
Ultrasonic Symbol

Features

Features for dogs

Features for people

LCD Large

Magnetic charging

Dustproof waterproof

Test Unit

Longshot Contacts

Long stand by time

Main function introduction

Trigger

Sound sensor

Sensitivity level 1-7, the default value is 5.

Training Method

Vibration : 0-7 level,0 is off default level 6

E-Shock: 0-7 level,0 is off default level 3

Ultrasound: 3frequencypoints, Scoff a:25K, b:24/26K, c: 24/25/26K

Protection mode : Execute 5 times in a row, pause for 60 seconds.

Product Testing

Charge the product before use

NOTIC

1. Do nonuse a charger with an output voltage exceeding 5V,
2. The magnetic charging calebin the package must be used. and other Magneti charging cables may not be abide (o charge
3. The product design includes reverse charging profs and 20V avervallage protection. In the state of overvoltage, twill stop charging and won’t damage the product
   

Power display

Charging- Battery icon dynamic running water light. Turn off the screen after 60 seconds of inactivity.

Fully charged -Static full display of battery icon and “F”. Shut down the screen after 60 seconds of inactivity, with a reminder every 10 seconds.

Battery power warning – Display flashing battery icon and “L”, automatically shut down after flashing for 10 seconds.

Blow air on the microphone or simulate a dog barking

After the product is triggered, it will perform ultrasonic, vibration and E-Shock output, indicating that the device is normal (check the screen icon to confirm the ultrasonic execution, the human ear cannot hear the ultrasonic)

Through the mode setting, select ultrasonic, vibration, E-Shock mode.
The shock function needs to be tested with a test board. If the E- Shock is functioning properly, the test unit will come on, and the higher the E-Shock level, the brighter the light.

Note : The hexagonal hole on the test lamp can be used to fasten or loosen the probe to the contact point.

When testing the E-Shock function, fix the test unit tool on the contacts.

Operation and Settings

**Poweroniort

**

Long press the switch button “2 seconds on/off

Function settings

a: In standby mode, click button to light up the screen. Then short press the button”” to select the function to set.

b : When the outer rings of the E-Shock icon, vibration icon, ultrasonic icon, and sensitivity icon are flashing, short press “A” to adjust the function level.

The E-Shock is flashing, adjust the E-Shock level
Short press the “A” button to adjust the E-Shock level from 1-7. The O level means function closed.

The vibration is flashing, adjust the vibration level
Short press the “A” button to adjust the vibration level from 1-7. The 0 level means function closed.

The ultrasonic is flashing, select the type of ultrasonic.
Short press the “A” key to select the ultrasound type from 1-3. The 0 level means function closed.

Sensitivity outer circle flashes, adjust sensitivity level.
Short press the “A” key to adjust the sensitivity from 1-7 levels. Level 7 is the highest, level 1 is the lowest, and the sensitivity is not 0.

Short press the “”key, there will be a slight vibration prompt when changing the parameters

Protected mode

After 5 consecutive triggers, it enters the protection mode, and the product is in a 1-minute pause period. Press the power button to exit the pause.

Assembling the Bark Stopper

Install the probe

1.  Select probe
   

2. Twist to tighten the probe

Shorter contacts are already installed on the bark arrester. If it is not long enough, please replace the long contact by yourself.

Install the Silicone Protective Cover

The conductive silicone protective cover can effectively reduce the physical damage of the contact to the dog’s skin.

1. .Chaise case

2. Putondirectly

Wearing Method

9A. Adjust the collar and bark stopper before wearing.

9B. Make sure the product is snug but loose enough that one finger can be caught between the strap and the dog’s neck.

9C. Points to note when wearing.

Wear less than 12 hours

Throat position

Guaranteed skin contact

Moderately tight collar

Frequently Asked Questions

Q : Why doesn't the bark stopper work when the dog barks?

A There are three possible causes for this problem. The first is that the trigger sensitivity is not high enough, so try turning up the sensitivity level. Secondly, the probe does not touch the skin, so please try to adjust the tightness of the strap to ensure good skin contact. The third mode setting is not high enough, so choose a mode with a high stimulation intensity.

Q: Are bark arresters safe and humane?

A: All the means of stopping barking will not cause any direct harm to the pet's body, but it will make them feel very uncomfortable. Even so, do not overuse this product on pets. See all warnings and cautions in the manual.

Q: Do other dog barks or other ambient noises also trigger the collar?

A: It can be triggered, but the probability is very low. We have optimized the waveform recognition technology of dog barking sound to enhance the ability to resist false triggering. If there are false triggers, please lower the sensitivity setting (1 is the lowest, 7 is the highest)

Basic Specifications

Product name : Ultrasonic Pet Bark Stopper
Product model : TC-012
Working voltage : 3.7V
Battery capacity : 300mAh
Charging voltage : DC 5V/1A
Waterproof grade: IP67
Operating temperature : -10°C~+50°C
storage temperature : -20°C~+60°C
Product Wight : 56g
Product size : 76mm37mm30mm

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>