ABBA CDR85 Integrated Aluminum RGB Spot Light Installation Guide

ABBA CDR85 Integrated Aluminum RGB Spot Light

Specifications

• Product: CDR85
• Rated Voltage: 12 AC/DC
• Warranty: 2 years from the date of purchase
• Usage: Low voltage landscape lighting fixture
• Power Unit Compatibility: Up to 25A, 15V

Product Usage Instructions

Important Safety Instructions:

1. Lamp gets hot quickly. Avoid touching the hot lens, guard, or enclosure. Keep away from materials that may burn. Use a soft cloth if handling is necessary.
2. Only qualified persons should install this electrical product. Ensure all power connections are off before installation.

Installation Steps:

1. Ensure the light cable wires input are 12V AC/DC.
2. Turn off the power before installation.
3. Attach the fixture(s) wires to the main cable connector suitable for direct burial using waterproof wire nuts (WN12 – sold separately).
4. Place the spike into the ground ensuring firm vertical mounting.
5. Adjust the light angle as desired.
6. Turn on the power.

Note: Connect the wires using WN12 (Sold separately).

FAQ

• Q: What should I do if the lamp gets too hot?
  A: Avoid touching the hot parts directly. Use a soft cloth for handling.

• Q: Can I install the fixture near a pool, spa, or fountain?
  A: No, do not install within 10 feet of a pool, spa, or fountain.

• Q: What is the warranty coverage?
  A: The fixture is covered by a 2-year warranty from the date of purchase. Warranty will be void if there is any damage due to improper usage or modification.

CDR85
INSTALLATION GUIDE
www.ABBALightingUSA.com

RATED VOLTAGE 12 AC/DC
Thank you for purchasing this quality product. To ensure correct function and safety, Please read and follow all instructions carefully before assembly, installation and before using this product.

IMPORTANT SAFETY INSTRUNCTIONS

LIGHTEN LAMP IS HOT!
WARNING: TO REDUCE THE RIS K OF FIRE OR INJURY TO PERSONS:

• Lamp gets HOT quickly!
• Do not touch HOT lens, guard or enclosure.
• Keep lamp away from materials that may burn.
• Do not touch the lamp any time. Use soft cloth.
• It is recommended only qualified persons to install this electrical product.
• Before attempting to install this unit, ensure all power connections are off for your own safety.

WARRANTY

• This fixture is covered by a 2 year warranty. The warranty is from the date of purchase, not the date of installation. Please keep the proof of purchase
• Warranty will be void if there is any damage due to improper usage or modification to the fixture.
• Failure to comply with the instruction in this manual may increase the risk of damage or injury and will void warranty.

CAUTION:

• fixture(s) must be installed in accordance with all local codes and ordinances.
• Do not install within 10 feet of a pool, spa or fountain

INSTALLATION INSTRUCTION

Fixture(s) should be used “ONLY” with low voltage landscape power units that do not exceed 25A, 15V.
The main cable from power units should be buried for less than 6 inches under the ground level.

1. Please ensure the light cable wires input are 12v ac/dc.
2. Turn off power before installation.
3. Attach the fixture(s) wires to the main cable connector suitable for direct burial. Use waterproof wire nuts. WN12 (Sold separately).
4. Put the spike into the ground. Try to make firm vertical mounting.
5. Adjust the light angle.
6. Turn on power.

www.ABBALightingUSA.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>