Daxun DX2022 In Car Multi Medaplayer User Manual
- June 17, 2024
- Daxun
Table of Contents
Daxun DX2022 In Car Multi Medaplayer
IN-CAR MULTI-MEDIA PLAYER WITH LCD TOUCH SCREEN DISPLAY BLUETOOTH, RADIO & MOBILE PHONE-LINKING
Wiring
Key Description
Prower
When the ignition switch is in the ACC ON position, press the switch panel on
the touch screen key to boot.
Off
After the host starts, press the switch on the side of the touchscreen button
for 2 seconds, and the host will perform the shutdown
- Attention: When there is noise, please briefly press the power button to enter the mute mode.
- Attention: When switching to other functions, the radio can be immediately turned off and the noise disappears.
Main interface
In the boot mode, the system defaults to enter the radio interface, touch home
to enter the main interface:
Microphone
When linking to the Carplay function, you can click this button ****for voice
control, similar to the voice assistant on an Apple phone or Android phone.
Volume control keys
When the volume is too low, you can click to increase the volume. When
the volume is too high, you can click to reduce the volume.
MAIN MENU
The Mode icon in gray means the corresponding function is not ready or proper
device have not been connected. Touch the corresponding Mode icon to enter
playing mode.
- Setup,to enter the Settings Menu
- Turn off TFT display. TFT enters black mode touches any zone returns to TFT on.
- Click to search for mobile Bluetooth and links
Settings
Touch the icon to enter the Setup menu. The Setup menu includes Time Settings, Sound Settings, General Settings, and Wallpaper Settings.
Time Settings
The Time Settings allow the user to set a Date & Time.
Sound Settings
Below shown is the Sound Setting Menu.
- Beep: set the Beep tone is ON or OFF.
- Reverse Vol: Adjust the music’s volume when the car is put into reverse
EQ Settings Balance/Fader:
Loudness: set the Loudness is ON or OFF. Touch the of Balance /Fader to tune
for the driver and passenger preference. The value of Balance (Left12-Right
12) and Fader (Front 12- Rear 12). Touch Reset to set both Balance and Fader
to O.
10-Band Equalizer:
10 band of EQ tuning, slide the EQ bar to tune each band frequency level
according to user preference. Touch Reset to set all Band to.
Default Volume Settings
Set the Main / BT Talking /Navi /Voice default volume value.
General settings
- Brightness: Adjust the screen’s brightness from 0-15.
- Illumination Detect: On / Off.
Key Led
LED Auto: On/Off.
- ON: the Led color will change automatically.
- OFF: Choose a custom LED color for the home screen buttons
BT
BT: Turn the Bluetooth Connection on and look for the Device Name to connect. After too many devices have been connected you can choose Clear Record
Radio Area
- Select the region : America/ Europe/ Eastern Europe/ Japan / Southeast Asia /Latin America / Asia / Australia.
- RDS: On/Off.
Rear Camera Settings
- Rear Camera View : Normal/Reverse
- Parking Assist Guide : On/Off
- Parking Assist Guide Adjustment
- Touch “> to enter Parking Assist Guide
- Parking Assist Guide adjustment:
Touch Reset to resume the default Parking Assist Line. Language: Select the desired language. Driving Position: select the driver position is Left or Right for Carplay. Drive Forbidden Watch Video: On /Off.
Serial & Version
CarPlay & Android Auto
Reset Factory Data: Once selected, the unit will prompt to confirm reset to factory settings. Once confirmed the system will automatically reboot.
Wallpaper
User can select the preset wallpaper for prefer background.
Apple Carplay
Plug the iPhone (iPhone 5 or latter models, and lOS 7.1 or above through the
lightening cable to the USB port of the source unit. The iPhone will be shown
the “CarPlay”. The source unit will enter the CarPlay interface, the APP that
support the CarPlay feature will be displayed on the source unit as shown
below. Touch the corresponding APP can operate, touch button to go back the
CarPlay interface.
Siri
In Carplay mode, user can talk to Siri to control the CarPlay functions. Press
to start the Siri function, or touch the button for 2 seconds or the HOME
button of the iPhone. Now you can talk to Siri to play music, I am going.
Note: For Siri function in the source unit, the Micriphone has to be connected.
Android Auto Operations
Android Auto enables you to use functions of your Androd device conveniently
for driving. You can easily access route guidance, make calls, listen to
music, etc. For details about Android Auto, visit
https://www.android.com/auto or https://support.google.com/androidauto.,
Compatible Android devices You can use Android Auto with Android devices of
Android version 5.0 or later.
Note: Android Auto may not be available on all devices and is not available in all countries or regions.
Operations
- Connect an Android device via a USB terminal. To use the hands-free function, connect the Android device via Bluetooth. When an Android device compatible with Android Auto is connected to USB terminal, the device is connected iva Bluetooth automatically, and the Bluetooth smartphone currently connected is disconnected.
- Unlock your Android device
- To enter Android Auto mode, touch the Android Auto icon in the head unit screen. You can perform the operations of the Apps of the connected Android device.
Radio mode
Radio mode
Touch the Radio mode icon to enter Radio.
USB
Store a Station
- Tune the radio to the desired station.
- Touch and hold one of the preset stations for more than 3 seconds, then the preset button will be highlighted on the screen, and the preset station will be stored.
USB
Plug the USB, the USB icon will be colorful. Touch the USB icon to enter
the USB playback mode. The source unit defaults the play the Audio in the USB
device.
File List browsing
- Touch to browse the folder and file list of the USB device. You can select the multi-media type.
video
Bluetooth Audio
Picture
Bluetooth Connect
If the Bluetooth is not connected, press Reconnect the paired phone or pair
the new device.
Bluetooth Audio
Touch the BT Audio icon to enter Bluetooth Audio playing mode. If the
Bluetooth is connected, the music will be played as follows;
Bluetooth Audio Playback
Bluetooth pairing
Pairing mode screen will be shown as below:
Turn On the Bluetooth of the mobile phone or Bluetooth device, you can see the CAR-KIT, select the CAR-KIT for pairing and connection.
Bluetooth phone
Touch the Phone icon in main menu to go to Phone mode. After the mobile phone
is connected to the source unit via Bluetooth (HFP), the user can through the
source unit to make a phone call. Please note it needs to connect the
microphone for phone call.
Make a call
- Touch the Keyboard icon to enter below screen.
- Using the keypad, touch 0-9,*,#, enter the phone number you wish to dial. If you input an incorrect number, touch the icon on the keypad to delete the incorrect number.
- Once the correct number appears on the screen, touch the interface. icon. To go to dialing interface.
- To end the call, touch the icon on the screen.
Receive an incoming call
If the Phone is connected to the source unit via Bluetooth, when an
incoming call, the below screen will be shown:
- Press to answer the incoming call.
- Press to reject the incoming call.
Call logs
Touch the icon to display the Call combined list.
Slide the bar at right side up and down to display a call logs up to 20 records.
Contacts
Touch the icon to access the phone book of the connected mobile phone. To make a call from the phonebook, simply touch the contact name.
BT Setup
- BT On /OFF, Power On or Off BT function. Auto Answer
- On /OFF, incoming call auto answer.
- Auto Loadpbk, On /OFF, when connectphone auto load phonebook on or off.
- Loadpbk, Manually load phone book.
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital
device, under Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used under the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>