GOVO GoSurround 300 Bluetooth Soundbar User Guide
- June 16, 2024
- GOVO
Table of Contents
GOVO GoSurround 300 Bluetooth Soundbar
GoSurround 300 Bluetooth Soundbar
Specifications
- Model: GoSurround 300
- Drivers size: 2 x 52 mm
- Frequency Range: 100Hz-20kHz
- Product Sensitivity: 80dB
- Battery Capacity: 2,000 mAh
- Total Playtime: 14 hours
- Charging Port: Type C
- Input Voltage: 5VDC, 1A
- Product Dimensions: 425 x 80 x 70mm
- Transmission Dist.: 10m
- Charging time: 3-4 hours
- Bluetooth: V5.3
How to Use
- Slide the button right to ON or left to OFF.
Music play/pause
- Short press the button once.
Answer/end call
- Short press the button once.
Reject call
- Long press the button.
Next song
- Short press the + button once.
Previous song
- Short press the – button once.
Volume up
- Long press the + button once.
Volume down
- Long press the – button once.
Mode change key Power saving mode
- Short press the M button to switch through BT/USB/TF.
Short press/Long press the button to turn off the RGB lights/green light
- Long press the button (BT mode).
Led Light
- Short press the Mode button to change to the new style.
- Note: The product can also work while it is being charged.
Integrated Control Panel
- (M) Multi-Function Button
- (-) Volume down Button
- (+) Volume up Button
- Light changer Play/Pause Button
Multiple Connectivity
- Connect 2 GoSurround 300 at the same time to level up your party game.
- Make sure that both your soundbars are in proximity and add in Bluetooth mode. Long press the Play button on the main soundbar till you hear the beep sound.
- Then your 2 soundbars are connected in TWS mode.
- A weak connection between the mobile device and the speaker can affect the sound performance.
- To improve the connection, move the mobile device closer to the speaker or remove any obstacles between the two devices.
- Low battery power can also affect the speaker’s sound performance.
- Please ensure that the speaker is fully charged to resolve this issue.
Safety Instructions
- Read these instructions before using the product.
- Read all warnings carefully.
- Follow all instructions carefully.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
Troubleshooting
Some terminal music players do not have an automatic switching play function, which may result in a ‘pop’ noise between songs.
If you are unable to connect wirelessly to your mobile device, try removing the Speaker from your mobile device’s list of saved devices.
FAQ
Q: Can I use the soundbar while it is being charged?
- A: Yes, the product can also work while it is being charged.
Q: How can I improve the connection between my mobile device and the speaker?
- A: To improve the connection, move the mobile device closer to the speaker or remove any obstacles between the two devices.
Q: What should I do if the speaker’s sound performance is affected by low battery power?
- A: Please ensure that the speaker is fully charged to resolve this issue.
- Get ready for MORE, for a LIFE of WOW with your all-new GoSurround 300. We strongly recommend you go through this manual completely before beginning to use the product as it contains important technical information to ensure you have a seamless audio experience. It can also be referred to in times of difficulty.
PACKAGE CONTENTS
- 1 x GoSurround 300
- 1 x Type C charging cable
- 1 x Aux cable
- 1 x User manual
- 1 x Warranty card
SPECIFICATIONS
- Model: GoSurround 300
- Drivers size: 2 x 52 mm
- Frequency Range: 100Hz～20kHz
- Product Sensitivity: 80dB
- Battery Capacity: 2,000 mAh
- Total Playtime : 14 hours
- Charging Port: Type C
- Input Voltage: 5VDC, 1A
- Product Dimensions: 425 x 80 x 70mm
- Transmission Dist: 10m
- Charging time: 3-4 hours
- Bluetooth: V5.3
HOW TO USE
- Power On/Off: Slide the button right to ON or left to OFF
- Music play/pause: Short press the button once
- Answer/end call: Short press the button once
- Reject call: Long press the button
- Next song: Short press the “+” button once
- Previous song: Short press the “-” button once
- Volume up: Long press the “+” button once
- Volume down: Long press the “-” button once
- Mode change key: Short press the “M” button to switch through BT/USB/TF
- Power saving mode: Short press/Long press the button to turn off the RGB lights/green light
- TWS function: Long press the button ( BT mode )
- Led Light: Short press the Mode button to change to a new style
- Note: The product can also work while it is being charged.
INTEGRATED CONTROL PANEL
MULTIPLE CONNECTIVITY
TWS FUNCTION
- Connect 2 GoSurround 300 at the same time to level up your party game. Make sure that both your soundbars are in proximity and add in Bluetooth mode.
- Long press the Play button on the main soundbar till you hear the beep sound.
- Then your 2 soundbars are connected in TWS mode.
TROUBLESHOOTING
- Some terminal music players do not have an automatic switching play function, which may result in a ‘pop’ noise between songs.
- If you are unable to connect wirelessly to your mobile device, try removing the Speaker from your mobile device’s list of saved devices.
- A weak connection between the mobile device and the speaker can affect the sound performance.
- To improve the connection, move the mobile device closer to the speaker or remove any obstacles between the two devices.
- Low battery power can also affect the speaker’s sound performance. Please ensure that the speaker is fully charged to resolve this issue.
SAFETY INSTRUCTIONS
- Read these instructions before using the product.
- Read all warnings carefully.
- Follow all instructions carefully.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>