HUAWEI T0013 Wireless Charging Case User Guide

: June 17, 2024
: Huawei

Table of Contents

Download and install the app
Pair and connect
Shortcut controls
Charge the case
Charge the earbuds
Noise canceling capabilities
Safety Information
Disposal and recycling information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Quick Start Guide

Download and install the app

Touch or scan the QR code to download and install the HUAWEI AI Life app, in order to try more features and customize your earbud settings.

https://smarthome.hicloud.com/d/?p=ZAAB

Pair and connect

Open the charging case and press and hold the Function button for 2 seconds until the indicator ﬂashes white. The earbuds will then enter Pairing mode.
Enable Bluetooth on the device to be paired with the earbuds, then search for the earbuds and complete the pairing.
The earbuds will automatically enter Pairing mode when you open the charging case for the ﬁrst time.
Restore the earbuds to their factory settings
Open the charging case. Press and hold the Function button for 10 seconds until the indicator ﬂashes red. The earbuds will then be restored to their factory settings, and subsequently re-enter Pairing mode.

Shortcut controls

| Swipe| Swipe down to decrease the volume
---|---|---
Swipe up to increase the volume
| Double-tap| Play/Pause audio
Answer/End a call
| Press and hold| Enable/Disable ANC
Reject a call

You can customize the double-tap gesture in the app, by setting it to play the previous or next track, wake up the voice assistant, or none.

Charge the case

To charge the charging case, connect it to a power source via a USB-C cable.

HUAWEI T0013 Wireless Charging Case User - Charge the
case

Place the charging case on a compatible wireless charger with the indicator facing upward, align the center of the wireless charging coil with the center of the wireless charger, and slightly adjust the position until the indicator turns on.

HUAWEI T0013 Wireless Charging Case User - Wireless
charging

The charging case can be used with some chargers that support the Qi protocol. It is recommended that you use the HUAWEI SuperCharge Wireless Charger.
Only the wireless charging edition supports wireless charging.
Reverse wireless charging with a phone is not supported.

Charge the earbuds

Place the earbuds into the charging case and close the lid to initiate automatic charging.

HUAWEI T0013 Wireless Charging Case User - Charge the
earbuds

Noise canceling capabilities

The earbuds are open-ﬁt, and the noise canceling capability can be affected by the ﬁt of the earbuds and the angle at which you wear them. For the best noise canceling effect, make sure that the earbuds ﬁt well and that you are wearing them properly.
The noise cancellation can be less efficient for medium and high frequencies, such as voices, broadcasts, horns, and impacts.

Safety Information

Before using and operating this device, read the following precautions to ensure an optimal device performance and avoid dangerous use or unauthorized operations.

To protect your hearing, do not listen to audio at a high volume for a long period of time.
Some wireless devices may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants, and hearing aids. When using the product, keep it at least 15 cm away from such medical devices. Consult the manufacturer of your medical equipment for more information.
Ideal temperatures: 0°C to 35°C for operating; -20°C to +45°C for storage.
When charging, an adapter should be plugged into a socket nearby and easily accessible. Use approved power adapters and chargers.
Ensure that the power adapter meets the requirements of IEC/EN 62368-1 and has been tested and approved according to national or local standards.
Observe all local traffic laws and regulations while using this product. Do not use this device when you are driving.
Keep this device and its accessories that may contain small components out of the reach of children. Otherwise, children may damage this device and its accessories by mistake, or swallow the small components, which may cause choking.
Avoid using the device in dusty, damp, or dirty environments, or near sources of magnetic interference.
Keep the battery away from fire, excessive heat, and direct sunlight. Do not place it on or in heating devices. Do not disassemble, modify, throw, or squeeze it. Do not insert foreign objects into it, submerge it in liquids, or expose it to external force or pressure, as this may cause it to leak, overheat, catch fire, or even explode.
Do not attempt to replace the battery yourself — you may damage the battery, which could cause overheating, fire, and injuries.
Avoid disassembling or modifying your device and its accessories. Unauthorized disassembly and modifications may result in voiding the factory warranty. If your device is faulty, visit an authorized Huawei Customer Service Center for assistance.

Precautions

Keep the metal contact points on the earphones and charging case clean. Otherwise, the earphones may not function properly.
If you experience any skin irritation while wearing the earphones, remove them and clean them thoroughly. If the issue persists, seek advice from a medical professional.
Enabling noise canceling may affect your awareness of surrounding sounds and alarms. Ensure that you are in a safe environment when using this function.
This device’s firmware will automatically update whenever it connects to a previously paired Honor device (released before the end of 2020) or a previously paired Huawei device, and Wi-Fi or mobile data is enabled. You can disable automatic firmware updates in Settings.

Disposal and recycling information

This symbol on the product, battery, literature, or packaging means that the products and batteries should be taken to separate waste collection points designated by local authorities at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves valuable materials and protects human health and the environment. For more information, please contact your local authorities, retailer, or household waste disposal service, or visit the website https://consumer.huawei.com/en/.

UK regulatory conformance
Hereby, Huawei Device Co., Ltd. declares that this device T0013/T0013C is in compliance with the relevant statutory instruments in the UK. The full text of the declaration of conformity is available at the following internet address: https://consumer.huawei.com/certification.
EU Regulatory Conformance
Hereby, Huawei Device Co., Ltd. declares that this device T0013/T0013C is in compliance with the following Directive RED 2014/53/EU, RoHS 2011/65/EU, EU REACH regulation, and Batteries (where included) directive.
The full text of the EU declaration of conformity and most recent information about accessories & software are available at the following internet address: https://consumer.huawei.com/certification.
Frequency Bands and Power
Bluetooth: 2.4 GHz 14 dBm.
Wireless Power charging: 110 kHz to 205 kHz: -10.59 dBuA/m @10 m.
ISED Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.
RF Exposure Information
This device is a low-power radio transmitter and receiver. As recommended by international guidelines, the device meets applicable national SAR limits of 2.0 W/kg (10g) and 1.6 W/kg (1g).
10g SAR: The highest reported SAR value: Head SAR: 0.347 W/kg.
1g SAR: The highest reported SAR value: Head SAR: 0.57 W/kg.
Legal Notice
Copyright © Huawei Device Co., Ltd. 2023. All rights reserved.
All contents in the documents in the packaging box, including but not limited to information about and portrayals of the appearance, color, size, and supported features of the product (the latest features will come with software updates), are for reference only. The actual product may vary.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of this mark by Huawei Technologies Co.,
Ltd. is under license. Huawei Device Co., Ltd. is an affiliate of Huawei Technologies Co., Ltd.
Privacy Protection
To better understand how we protect your personal information, please see the privacy policy at https://consumer.huawei.com/privacy-policy, or read the privacy policy and service terms using the corresponding app.
Software License Agreement
Please read the software license agreement carefully before using this device. By using the device, you indicate that you agree to be bound by the license agreement. To read the agreement, please visit the following website: https://consumer.huawei.com/en/legal/eula/.
Open Source Software Notice
For the open source software statement of your device, please visit https://consumer.huawei.com/en/opensource/ and search for the device name.
Australia/New Zealand