Cangyuan S9 Bluetooth Headset Instruction Manual
- June 17, 2024
- Cangyuan
Table of Contents
Cangyuan S9 Bluetooth Headset
Key Description Key Function
- Power on: Remove the headset from the charging case, the headset will automatically power on and pair, or long press the touch button for about 3-5 seconds to power on the headset.
- Power off: Put the headset into the charging compartment and it will turn off automatically or long press the touch button for 3-5 seconds.
- Play/Pause: Click one of the headset touch buttons to pause playback during playback, and click to replay during pause.
- Reject call: Long press the headset touch button to
- Answer / Hang Up: Click one of the headset touch button to answer the call, to end the call click one of the headset touch button to hang up. reject the call for 2-3 seconds.
- Double-click to adjust the up and down songs.
- Triple-click to adjust the volume.
- Four Clicks: switch game mode
- Five Clicks: switch between Chinese and English.
- Long press: Voice Assistant
Pairing Connection
How to turn on and pair the headset?
-
Remove the headset from the charging case. At this point the headset will automatically power on and pair.
Turn on your phone’s Wireless, search and connect. If the headset is connected to one ear or the device cannot be searched, please put the headset back to the charging compartment, take out the headset from the charging compartment again and wait for about 5 seconds, and then pair and connect with your cell phone. (Repeat the above steps if you still can not connect, please check whether the headset is charging. (The headset will turn off automatically when it is charging!) -
When the headset is paired for the first time, the headset will be automatically paired when you open the headset in the future, and it will also be automatically connected back to the device that has already been connected.
Charging Indicator Description
- Headset indicator Put the headset into the charging box (magnetic contact interface to be placed correctly), the headset will automatically Enter the charging state, after fully charged: the indicator light is off or always on.
- Charging box indicator
When charging the charging box: the indicator light is flashing or always on (digital display models power display).
When the charging box is fully charged: the indicator light is always on or off (the digital display shows 100).
Please use 1A output charging head, please do not use fast charging head, so as not to cause charging bad charging compartment.
Precautions for use
- Headphones need to be stored in a dry and ventilated environment, avoid contact with oil, vapor steam, moisture and dust, so as not to affect product performance.
- Avoid the use of stimulating, organic solvents or items containing these ingredients to clean the headset.
- The headset needs to be used in accordance with the requirements of the correct specification, pay attention to the use of environmental impact on the headset, in order to ensure a smooth connection, it is recommended that the distance between the cell phone and the headset in the range of 10-15 meters.
- If the headset is not connected or communication is not smooth and other problems, please do not privately disassemble the headset body and its accessories, otherwise no warranty.
- To charge the charging case, please use the standard charger or a charger that meets the requirements.
- To ensure your normal use of the headset, please make sure that the headset is fully charged.
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>