Eterbiz T043 Under Cabinet Lights User Guide
- June 17, 2024
- Eterbiz
Table of Contents
Eterbiz T043 Under Cabinet Lights
Before using the product, please read the manual carefully.
Product Description
There is an intelligent far-infrared sensing device under the cabinet lamp, which has fast response without delay. Suitable for cabinets, wardrobes, wine cabinets, aisles, corridors and other places.
Induction Range
The automatic sensing range is 16.4FT-19.6FT/120° 20 seconds no action automatically shut down.
Operation guide
Light mode adjustment switch
Three modes:
- ON Always-on mode, the light keeps shining.
- In night sensing mode, the motion light is automatically lit when it is sensed in a dim environment.
- In daytime induction mode, when the motion light is sensed, it will light up automatically.
- OFF Turn off the lights
Installation instructions
The metal surface can be directly adsorbed, and the non-metal surface can be attached with its double-sided tape or fixed with screws.
Absorb and fix the lamp on the base.
The light angle can be adjusted freely.
Parameter
- When using it for the first time, please fully charge it first
- If it is not used for a long time, it is recommended to charge it once every 3 months for the maintenance of the built-in lithium battery
- The hand-scanning sensor cannot be covered by other items. When cleaning the surface of the lamp, you need to wipe it with a soft face, and it cannot be clear of corrosive solvents.
- Do not install in humid, high-temperature places, or vents, so as not to affect normal use
- Do not disassemble the product without permission
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>