TRIO LIGHTING 641719187 Delightingsolislux Instruction Manual

TRIO LIGHTING 641719187 Delightingsolislux

WARNING!
Before assembling, please read carefully the safety instructions!

Installation

Remote Function

93803RD-0A

Specification

• 230V~50Hz
• 1 x LED 53W

Features

This product contains a light source(s) of energy efficiency class(es) E.

Description

• Description of how the light works without the remote control unit
  If the light is switched on via the main switch/wall switch, the unit provides the lighting scenario which was last set using the remote control unit (memory effect).

• Description of how the light works with the remote control unit
  When the light is switched on, the light scenario last set with the remote control is set (memory function).

Connecting and disconnecting the remote control

• To connect the light with the remote control, turn off the light for at least 10 seconds and then turn it on again.
• Press the button ⑤, 3 Emes (within 3 seconds). Flashing of the lamp 3 Emes indicates that the connection would be established successfully.
• To disconnect the light from the remote control, turn the light off for at least 10 seconds and then turn it on again. Press the button ⑤, 5 Emes (within 3 seconds). The flashing of the lamp 5 Emes indicates that the disconnection was successful. The connection can be re-established as described above.

Operation of the remote control

• 1. & 2. Light colour: The regulation takes place in stages. The individual levels can be controlled by briefly pressing the button. The warmest or coldest colour setting is reached more quickly by pressing the key continuously.
• 3 & 4. Brightness regulator: The adjustment takes place in stages. By pressing for a short period, it is possible to control the individual stages. Pressing the button permanently results in the maximum or minimum brightness being reached.
• 5. Pressing the button briefly switches the light on.
• 6. Pressing the key briefly switches the light off. To activate the night light mode, keep the key ⑥ pressed for a long time, the light switches off and then switches on again automatically after a short time. Keep the key pressed until the light has switched itself on in night light mode.

Time mode

To switch on the time setting mode, please press and hold the button ⑤ until the lamp flashes once. Within 3 seconds, select one of the four buttons that determine the timer setting time. The lamp flashes 1 to 4 times (each light pulse indicates a time duration of 15 minutes).

1. Two light pulses indicate a time setting of 30 minutes.
2. Four light pulses indicate a time setting of 60 minutes.
3. Three light pulses indicate a time setting of 45 minutes.
4. A light pulse indicates a time setting of 15 minutes.
5. By briefly pressing the key ⑥, the light turns off and the Eme mode is terminated.

Declaration of Conformity

Hereby, Trio Leuchten GmbH. Gut Nierhof 17, D-59757 Arnsberg, declares that this product complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://files.trio-lighting.com/ce-conformity/641719187.pdf.

TRIO Leuchten GmbH | Gut Nierhof 17 | D-59757 Arnsberg | www.trio- lighting.com.

TRIO Leuchten GmbH

• TRIO International GmbH Gut Nierhof 17 D-59757 Arnsberg
• www.trio-lighting.com.
• WEEE-Reg. Nr.: DE78273666
• TRIO Lighting Ibérica s.l.: RAEE 4544
• TRIO Lighting Italia s.r.l.: RAEE IT13020000007829
• TRIO Lighting Scandinavia Oy: WEEE PIR2005Y354114/2114

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>